Open Innovation Success Factors by ICT Use in Japanese Firms

The innovation by an independence principle is a limit in Japanese firm today. The expectation for the open innovation that positively uses outside resources on business has risen in Japanese firm. In open innovation, the strategy that expands sharing information and using the resource from supplier to customer for the innovation is needed. Therefore, the use of ICT is indispensable for the promotion of the open innovation. In this paper, we discussed how to utilize ICTs for open innovation activities in order to achieve more effective innovation outcomes in Japanese Medium-sized Enterprises. We conducted a mail survey for Japanese Medium-sized Enterprises in industries such as manufacturing, construction, and information and telecommunication in January 2010. Based on their replies, we applied the some logistic regression analyses. As results, the following points are clarified. Firms which achieve open innovation are enhancing the innovation by cooperating and exchanging information with the following entities: (i) affiliate companies which have the excellent technological knowhow; (ii) customers which locate inside or outside of the region; and (iii) firms in the same industry inside of the same region. The firms cultivate mutual trust for a long time and jointly develop frequently the new products and services. And they have frequently exchanged the customer needs, new release information of the rival companies and a high-tech trend with each other. They use CTI and SCM to use information and knowledge for designing and developing a new product and service. Moreover, it can be confirmed that the firm which top management is familiar with ICT and exercises the leadership for ICT use. In addition, the firm not only introduced ICT but also reformed organizational structures, systems, and company's rules at the same time. These analysis results will provide useful suggestions for SMEs to practice open innovation in the future. --Open Innovation,ICT,Japanese firms

Empirical analysis of internal social media and product innovation: Focusing on SNS and social capital

Recently social media such as Blog and SNS has been introducing by many firms for means of sharing information inside the firm, in particular to promote product and process innovation. This paper attempts to examine the relationship between social media and product innovation, and research questions are summarized as follows: (i) whether social capital influences the use of social media; (ii) whether social media promotes product innovation; and (iii) whether the effect of social media on product innovation is different in the manufacturing and service industry. The analysis clarifies that social capital in the firm is indispensable for the effective use of social media. Managerial attitudes toward innovation and social media are requirements for firms to promote product innovation. Managers thus should make an effort to raise social capital and nurture reciprocal culture for SNS use inside the firm. The paper finds that social media for product innovation is more important in the service industry than manufacturing. Social media makes it easy to obtain customers' information and share it among related sections, because social media enables to expand channels to make contact directly with the customer in the service industry.Social Media , Product Innovation,Social Capital,Ordered Probit Regression

The origin of MeV gamma-ray diffuse emission from the inner Galactic region

The origin of the inner Galactic emission, measured by COMPTEL with a flux of $\sim ~ 10^{-2}$ MeV cm$^{-2}$ s$^{-1}$ sr$^{-1}$ in the 1-30 MeV range, has remained unsettled since its discovery in 1994. We investigate the origin of this emission by taking into account individual sources which are not resolved by COMPTEL and the Galactic diffuse emission. The source contribution is estimated for sources crossmatched between the Swift-BAT and Fermi-LAT catalogs by interpolating the energy spectra in the hard X-ray and GeV gamma-ray ranges, as well as unmatched sources. This results in a flux of $\sim$20% of the COMPTEL excess. The Galactic diffuse emission is calculated by GALPROP to reconcile the cosmic-ray and gamma-ray spectra with observations by AMS-02, Voyager, and Fermi-LAT, resulting in a flux of $\sim$30-80% of the COMPTEL emission. Thus, we show that the COMPTEL emission could be roughly reproduced by a combination of the sources and the Galactic diffuse emission. Furthermore, combined with the extragalactic emission, we construct all-sky images in the MeV gamma-ray range to pinpoint some potential interesting targets for future missions, which would be critical for bridging the MeV gap in the spectra of gamma-ray sources.Comment: Proceedings of Science; 7th Heidelberg International Symposium on High-Energy Gamma-Ray Astronomy (Gamma2022), 4-8 July 2022, Barcelona, Spai

One-Step Conversion of Glutamic Acid into 2-Pyrrolidone on a Supported Ru Catalyst in a Hydrogen Atmosphere: Remarkable Effect of CO Activation

Glutamic acid, an abundant nonessential amino acid, was converted into 2-pyrrolidone in the presence of a supported Ru catalyst under a pressurized hydrogen atmosphere. This reaction pathway proceeded through the dehydration of glutamic acid into pyroglutamic acid, subsequent hydrogenation, and the dehydrogenation–decarbonylation of pyroglutaminol into 2-pyrrolidone. In the conversion of pyroglutaminol, Ru/Al2O3 exhibited notably higher activity than supported Pt, Pd, and Rh catalysts. IR analysis revealed that Ru can hydrogenate the formed CO through dehydrogenation–decarbonylation of hydroxymethyl groups in pyroglutaminol and can also easily desorb CH4 from the active sites on Ru. Furthermore, Ru/Al2O3 showed the highest catalytic activity among the tested catalysts in the conversion of pyroglutamic acid. Consequently, the conversion of glutamic acid produced a high yield of 2-pyrrolidone by using the supported Ru catalyst. This is the first report of this one-pot reaction under mild reaction conditions (433 K, 2 MPa H2)„ which avoids the degradation of unstable amino acids above 473 K

Bio-mimetic Control of An Externally powered Prosthetic Forearm Based on EMG Signals

The EMG signals which include information on not only mascle force but operator's intended motion and mechanical impedance property of joints have been often used as control signals of prosthetic arms. Most of previous researches, however, adopted only the ON/OFF control of the prosthetic arms depending on the results of the EMG pattern discrimination, or controlled only a particular joint depending on the torque estimated from the EMG signals. In this paper, we propose a multi-joint control method of a prosthetic forearm using the EMG signals. In order to realize the natural feeling of control similar to that of the human movements, the impedance model of human forearm is introduced to the control system. Also the force level during the motion is estimated from the EMG signals and used as the control command to each joint. It is shown from the experiments that the forearm motions and force levels can be estimated by using the EMG signals, and the prosthetic forearm can be controlled based on the impedance model smoothly

Quantitative Evaluation of Pain during Electrocutaneous Stimulation using a Log-Linearized Peripheral Arterial Viscoelastic Model

In clinical practice, subjective pain evaluations, e.g., the visual analogue scale and the numeric rating scale, are generally employed, but these are limited in terms of their ability to detect inaccurate reports, and are unsuitable for use in anesthetized patients or those with dementia. We focused on the peripheral sympathetic nerve activity that responds to pain, and propose a method for evaluating pain sensation, including intensity, sharpness, and dullness, using the arterial stiffness index. In the experiment, electrocardiogram, blood pressure, and photoplethysmograms were obtained, and an arterial viscoelastic model was applied to estimate arterial stiffness. The relationships among the stiffness index, self-reported pain sensation, and electrocutaneous stimuli were examined and modelled. The relationship between the stiffness index and pain sensation could be modelled using a sigmoid function with high determination coefficients, where R2 ≥ 0.88, p < 0.01 for intensity, R2 ≥ 0.89, p < 0.01 for sharpness, and R2 ≥ 0.84, p < 0.01 for dullness when the stimuli could appropriately evoke dull pain.This work was supported by the Center of Innovation Program from Japan Science and Technology Agency.Supplementary information accompanies this paper at https://doi.org/10.1038/s41598-018-21223-1

Titanium Immobilized with an Antimicrobial Peptide Derived from Histatin Accelerates the Differentiation of Osteoblastic Cell Line, MC3T3-E1

The objective of this study was to evaluate the effect of titanium immobilized with a cationic antimicrobial peptide (JH8194) derived from histatin on the biofilm formation of Porphyromonas gingivalis and differentiation of osteoblastic cells (MC3T3-E1). The titanium specimens (Ti) were immobilized with JH8194, according to the method previously described. The colonization of P. gingivalis on JH8194-Ti was significantly lower than that on control- and blocking-Ti. JH8194-Ti enhanced the mRNA expressions of Runx2 and OPN, and ALPase activity in the MC3T3-E1, as compared with those of control- and blocking-Ti. These results, taken together, suggested the possibility that JH8194-Ti may be a potential aid to shorten the period of acquiring osseointegration

Mesoscopic nature of serration behavior in high-Mn austenitic steel

セレーション挙動の解明 --高強度・高延性を示す高Mn鋼の変形の本質に迫る--. 京都大学プレスリリース. 2020-12-25.We have thoroughly clarified the mesoscopic nature of serration behavior in a high-Mn austenitic steel in connection with its characteristic localized deformation. A typical high-Mn steel, Fe-22Mn-0.6C (wt. %), with a face centered cubic (FCC) single-phase structure was used in the present study. After 4 cycles of repeated cold-rolling and annealing process, a specimen with a fully recrystallized microstructure having a mean grain size of 2.0 μm was obtained. The specimen was tensile tested at room temperature at an initial strain rate of 8.3 × 10−4 s−1, during which the digital image correlation (DIC) technique was applied for analyzing local strain and strain-rate distributions in the specimen. Obtained results indicated that a unique strain localization behavior characterized by the formation, propagation and annihilation of deformation localized bands, so-called Portevin–Le Chatelier (PLC) bands, determined the global mechanical response appearing as serration on the stress-strain curve. In addition, the in-situ synchrotron XRD diffraction during the tensile test was utilized to understand what was happening in the material with respect to the PLC banding. Lattice strain of (200) plane nearly perpendicular to the tensile direction dropped when every PLC band passed through the beam position, which indicated a stress relaxation occurred inside the PLC band. At the same time, the dislocation density increased drastically when the PLC band passed the beam position, which described that the material was plastically deformed and work-hardened mostly within the PLC band. All the results obtained consistently explained the serration behavior in a mesoscopic scale. The serration behavior on the stress-strain curve totally corresponded to the formation, propagation and annihilation of the PLC band in the 22Mn-0.6C steel, and the localized deformation, i.e., the PLC banding, governed the characteristic strain hardening of the material