Investigation and mathematical description of the real driving force of passive transport of drug molecules from supersaturated solutions

The aim of this study was to investigate the impact of formulation excipients and solubilizing additives on dissolution, supersaturation, and membrane transport of an active pharmaceutical ingredient (API). When a poorly water-soluble API is formulated to enhance its dissolution, additives, such as surfactants, polymers, and cyclodextrins, have an effect not only on dissolution profile but also on the measured physicochemical properties (solubility, pKa, permeability) of the drug while the excipient is present, therefore also affecting the driving force of membrane transport. Meloxicam, a nonsteroidal anti-inflammatory drug, was chosen as a poorly water-soluble model drug and formulated in order to enhance its dissolution using solvent-based electrospinning. Three polyvinylpyrrolidone (PVP) derivatives (K30, K90, and VA 64), Soluplus, and (2-hydroxypropyl)-β-cyclodextrin were used to create five different amorphous solid dispersions of meloxicam. Through experimental design, the various formulation additives that could influence the characteristics of dissolution and permeation through artificial membrane were observed by carrying out a simultaneous dissolution-permeation study with a side-by-side diffusion cell, μFLUX. Although the dissolution profiles of the formulations were found to be very similar, in the case of Soluplus containing formulation the flux was superior, showing that the driving force of membrane transport cannot be simplified to the concentration gradient. Supersaturation gradient, the difference in degree of supersaturation (defined as the ratio of dissolved amount of the drug to its thermodynamic solubility) between the donor and acceptor side, was found to be the driving force of membrane transport. It was mathematically derived from Fick's first law, and experimentally proved to be universal on several meloxicam containing ASDs and DMSO stock solution. © 2016 American Chemical Society

Membrane-water partitioning, membrane permeability, and baseline toxicity of the parasiticides ivermectin, albendazole, and morantel

A comparative hazard assessment of the antiparasitics ivermectin, albendazole, and morantel was performed, with a particular focus on bioavailability and uptake into biological membranes. The experimentally determined liposome-waterdistribution ratio at pH 7 (D^sub lipw^ (pH 7)) of the positively charged morantel was 100 L/kg lipid. The D^sub lipw^ (pH 7) of albendazole was 3,000 L/kg lipid. The membrane permeability determined with the parallel artificial membrane permeability assay was consistent with predictions from a quantitative structure-activity relationship (QSAR) for morantel but 14-fold lower than predicted for albendazole which can be rationalized because neutral albendazole is, in fact, zwitterionic and the large dipole moment hinders permeation through hydrophobic membranes. An unusually large molecule, ivermectin was suspected to show decreased bioaccumulation because of its bulkiness, but experimental determination of solubility showed that it was 40-fold less soluble than expected from a QSAR between solubility and the octanol-water partition coefficient. In contrast, its membrane permeability appeared to be typical for a compound of the given hydrophobicity, but it was not possible to determine the membrane-water partition coefficient because of its low solubility and high affinity to the dialysis membrane of the experimental device. The D^sub lipw^ (pH 7) for ivermectin of 2,700 L/kg lipid was calculated with a QSAR model. Morantel and albendazole were baseline toxicants in the bioluminescence inhibition test with Vibrio fischeri and a test for inhibition of photosynthesis in green algae. Only ivermectin exhibited a specific effect toward algae, but the excess toxicity was not very pronounced and might be biased by the uncertainty of the estimated hydrophobicity descriptor. Overall, we did not find any unexpected effect on nontarget endpoint

Artificial lipid membrane permeability method for predicting intestinal drug transport: Probing the determining step in the oral absorption of sulfadiazine; Influence of the formation of binary and ternary complexes with cyclodextrins

We propose an in vitro permeability assay by using a modified lipid membrane to predict the in vivo intestinal passive permeability of drugs. Two conditions were tested, one with a gradient pH (pH 5.5-donor/pH 7.4-receptor) and the other with an iso-pH 7.4. The predictability of the method was established by correlating the obtained apparent intestinal permeability coefficients (Papp) and the oral dose fraction absorbed in humans (fa) of 16 drugs with different absorption properties. The Papp values correlated well with the absorption rates under the two conditions and the method showed high predictability and good reproducibility. On the other hand, with this method, we successfully predicted the transport characteristics of oral sulfadiazine (SDZ). Also, the tradeoff between the increase in the solubility of SDZ by its complex formation with cyclodextrins and/or aminoacids and its oral permeability was assessed. Results suggest that SDZ is transported through the gastrointestinal epithelium by passive diffusion in a pH-dependent manner. These results support the classification of SDZ as a high/low borderline permeability compound and are in agreement with the Biopharmaceutics Classification Systems (BCS). This conclusion is consistent with the in vivo pharmacokinetic properties of SDZ.Fil: Delrivo, Alicia. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Departamento de Farmacia; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba; ArgentinaFil: Aloisio, Carolina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica; ArgentinaFil: Longhi, Marcela Raquel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica; ArgentinaFil: Granero, Gladys Ester. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica. Universidad Nacional de Córdoba. Facultad de Ciencias Químicas. Unidad de Investigación y Desarrollo en Tecnología Farmacéutica; Argentin

Responsive Micromolds for Sequential Patterning of Hydrogel Microstructures

Microscale hydrogels have been shown to be beneficial for various applications such as tissue engineering and drug delivery. A key aspect in these applications is the spatial organization of biological entities or chemical compounds within hydrogel microstructures. For this purpose, sequentially patterned microgels can be used to spatially organize either living materials to mimic biological complexity or multiple chemicals to design functional microparticles for drug delivery. Photolithographic methods are the most common way to pattern microscale hydrogels but are limited to photocrosslinkable polymers. So far, conventional micromolding approaches use static molds to fabricate structures, limiting the resulting shapes that can be generated. Herein, we describe a dynamic micromolding technique to fabricate sequentially patterned hydrogel microstructures by exploiting the thermoresponsiveness of poly(N-isopropylacrylamide)-based micromolds. These responsive micromolds exhibited shape changes under temperature variations, facilitating the sequential molding of microgels at two different temperatures. We fabricated multicompartmental striped, cylindrical, and cubic microgels that encapsulated fluorescent polymer microspheres or different cell types. These responsive micromolds can be used to immobilize living materials or chemicals into sequentially patterned hydrogel microstructures which may potentially be useful for a range of applications at the interface of chemistry, materials science and engineering, and biology.United States. Army Research Office (Institute for Soldier Nanotechnologies at MIT, project DAAD-19-02-D-002)United States. Office of Naval ResearchNational Institutes of Health (U.S.) (DE013023)National Institutes of Health (U.S.) (DE016516)National Institutes of Health (U.S.) (HL092836)National Institutes of Health (U.S.) (DE019024)National Institutes of Health (U.S.) (EB012597)National Institutes of Health (U.S.) (AR057837)National Institutes of Health (U.S.) (DE021468)National Institutes of Health (U.S.) (HL099073

Responsive Microgrooves for the Formation of Harvestable Tissue Constructs

Given its biocompatibility, elasticity, and gas permeability, poly(dimethylsiloxane) (PDMS) is widely used to fabricate microgrooves and microfluidic devices for three-dimensional (3D) cell culture studies. However, conformal coating of complex PDMS devices prepared by standard microfabrication techniques with desired chemical functionality is challenging. This study describes the conformal coating of PDMS microgrooves with poly(N-isopropylacrylamide) (PNIPAAm) by using initiated chemical vapor deposition (iCVD). These microgrooves guided the formation of tissue constructs from NIH-3T3 fibroblasts that could be retrieved by the temperature-dependent swelling property and hydrophilicity change of the PNIPAAm. The thickness of swollen PNIPAAm films at 24 °C was approximately 3 times greater than at 37 °C. Furthermore, PNIPAAm-coated microgroove surfaces exhibit increased hydrophilicity at 24 °C (contact angle θ = 30° ± 2) compared to 37 °C (θ = 50° ± 1). Thus PNIPAAm film on the microgrooves exhibits responsive swelling with higher hydrophilicity at room temperature, which could be used to retrieve tissue constructs. The resulting tissue constructs were the same size as the grooves and could be used as modules in tissue fabrication. Given its ability to form and retrieve cell aggregates and its integration with standard microfabrication, PNIPAAm-coated PDMS templates may become useful for 3D cell culture applications in tissue engineering and drug discovery.Massachusetts Institute of Technology. Institute for Soldier Nanotechnologies (project DAAD-19-02-D-002)Charles Stark Draper LaboratoryNational Institutes of Health (U.S.) (DE01323)National Institutes of Health (U.S.) (DE016516)National Institutes of Health (U.S.) (HL092836)National Institutes of Health (U.S.) (DE019024)National Institutes of Health (U.S.) (EB007249)National Science Foundation (U.S.) (NSF Career Award (DMR0- 847287))United States. Office of Naval Research (Young Investigator Award)Wyss Institute for Biologically Inspired Engineerin