Vibration analysis of the civic tower in Rieti

In the last decades the definition of a suitable monitoring system for identifying the dynamic behavior of structures has had a central position in the civil engineering research area. The vibration analysis leads to the recognition of the reference state of structures which is essential to determine the integrity level when extreme events occur, such as earthquakes. The latest seismic events occurred in the world have shown the essential role of the new passive seismic techniques which aim to protect structures and the importance of supervising the building construction operations and the adopted improvement measures. In this work the structural monitoring of the civic tower located in Rieti is presented. In the tower a non-conventional TMD has been installed via an inter-story isolation system at the top floor by means of High Damping Rubber Bearings (HDRB). The general goal is to define a monitoring system suitable with this experimental case through the vibration analysis. Several aspects will be taken into account: the choice of sensors setup, the measured quantities and the extraction of structural information. Firstly this will allow to define the structure’s reference state featured by frequencies, damping ratios and mode shapes. Moreover the effective design of the monitoring system would lead to the characterization of the dynamic behavior of the structure equipped with a passive vibration control system. Different tests have been carried forward: ambient vibration test (AVT), forced vibration test (FVT) with vibrodyne and seismic test (ST). The AVT and the FVT enable to define the monitoring system and check the reliability of the adopted identification tools, among which an Output Only algorithm stands out: the Observer Kalman Filter System Id. On the other hand the ST will point out some preliminary information about the dynamic behaviour of the structure equipped with a non conventional Tuned Mass Damper referring it to higher levels of vibrations

Neuroprediction and A.I. in Forensic Psychiatry and Criminal Justice: A Neurolaw Perspective

Advances in the use of neuroimaging in combination with A.I., and specifically the use of machine learning techniques, have led to the development of brain-reading technologies which, in the nearby future, could have many applications, such as lie detection, neuromarketing or brain-computer interfaces. Some of these could, in principle, also be used in forensic psychiatry. The application of these methods in forensic psychiatry could, for instance, be helpful to increase the accuracy of risk assessment and to identify possible interventions. This technique could be referred to as ‘A.I. neuroprediction,’ and involves identifying potential neurocognitive markers for the prediction of recidivism. However, the future implications of this technique and the role of neuroscience and A.I. in violence risk assessment remain to be established. In this paper, we review and analyze the literature concerning the use of brain-reading A.I. for neuroprediction of violence and rearrest to identify possibilities and challenges in the future use of these techniques in the fields of forensic psychiatry and criminal justice, considering legal implications and ethical issues. The analysis suggests that additional research is required on A.I. neuroprediction techniques, and there is still a great need to understand how they can be implemented in risk assessment in the field of forensic psychiatry. Besides the alluring potential of A.I. neuroprediction, we argue that its use in criminal justice and forensic psychiatry should be subjected to thorough harms/benefits analyses not only when these technologies will be fully available, but also while they are being researched and developed

Hamiltonian approach to hybrid plasma models

The Hamiltonian structures of several hybrid kinetic-fluid models are identified explicitly, upon considering collisionless Vlasov dynamics for the hot particles interacting with a bulk fluid. After presenting different pressure-coupling schemes for an ordinary fluid interacting with a hot gas, the paper extends the treatment to account for a fluid plasma interacting with an energetic ion species. Both current-coupling and pressure-coupling MHD schemes are treated extensively. In particular, pressure-coupling schemes are shown to require a transport-like term in the Vlasov kinetic equation, in order for the Hamiltonian structure to be preserved. The last part of the paper is devoted to studying the more general case of an energetic ion species interacting with a neutralizing electron background (hybrid Hall-MHD). Circulation laws and Casimir functionals are presented explicitly in each case.Comment: 27 pages, no figures. To appear in J. Phys.

A Model-Based methodology to support the Space System Engineering (MBSSE)

International audienceThis paper presents a model based methodology that relies on the sound basis of the most recent and widespread applicable system engineering standards and model based practices, The methodology has been defined to support domain specific space system engineering standards and practices and assessed through the application on industrial case studies. A complementary formal verification approach has also been experimented

Modeling a biological reactor using sparse identification method

In this work a model-based controller for a fermentation bioreactor has been developed. By simulating the model of the process that acts as a virtual plant, input-output data have been generated and used to identify the system using sparse identification of nonlinear dynamics methodology. The obtained model is then used in a model-based algorithm to control the bioreactor temperature, where the manipulated action is obtained as a result of a constrained nonlinear optimization problem which minimizes the mismatch between the predicted trajectory and the desired one. Good performances have been obtained by applying the proposed control strategy for set-point changes and disturbance rejection

Adaptive feedback control for a pasteurization process

The milk pasteurization process is nonlinear in nature, and for this reason, the application of linear control algorithms does not guarantee the obtainment of the required performance in every condition. The problem is here addressed by proposing an adaptive algorithm, which was obtained by starting from an observer-based control approach. The main result is the obtainment of a simple PI-like controller structure, where the control parameters depend on the state of the system and are adapted online. The proposed algorithm was designed and applied on a simulated process, where the temperature dependence of the milk's physical properties was considered. The control strategy was tested by simulating different situations, particularly when time-varying disturbances entered the system. The use of the adaptive rule reduces the variance generally introduced by the PI or PID controller

Damage detection in a RC-masonry tower equipped with a non-conventional TMD using temperature-independent damage sensitive features

Many features used in Structural Health Monitoring strategies are not just highly sensitive to failure mechanisms, but also depend on environmental or operational fluctuations. To prevent incorrect failure uncovering due to these dependencies, damage detection approaches can use robust and temperature-independent features. These indicators can be naturally insensitive to environmental dependencies or artificially made independent. This work explores both options. Cointegration theory is used to remove environmental dependencies from dynamic features to create highly sensitive parameters to detect failure mechanisms: the cointegration residuals. This paper applies the cointegration technique for damage detection of a concrete-masonry tower in Italy. Two regression models are implemented to capture temperature effects: Prophet and Long Short-Term Memory networks. Results demonstrate the advantages and limitations of this methodology for real applications. The authors suggest to combine the cointegration residuals with a secondary temperature-insensitive damage-sensitive set of features, the Cepstral Coefficients, to address the possibility of capturing undetected structural damage

Singular solutions of a modified two-component Camassa-Holm equation

The Camassa-Holm equation (CH) is a well known integrable equation describing the velocity dynamics of shallow water waves. This equation exhibits spontaneous emergence of singular solutions (peakons) from smooth initial conditions. The CH equation has been recently extended to a two-component integrable system (CH2), which includes both velocity and density variables in the dynamics. Although possessing peakon solutions in the velocity, the CH2 equation does not admit singular solutions in the density profile. We modify the CH2 system to allow dependence on average density as well as pointwise density. The modified CH2 system (MCH2) does admit peakon solutions in velocity and average density. We analytically identify the steepening mechanism that allows the singular solutions to emerge from smooth spatially-confined initial data. Numerical results for MCH2 are given and compared with the pure CH2 case. These numerics show that the modification in MCH2 to introduce average density has little short-time effect on the emergent dynamical properties. However, an analytical and numerical study of pairwise peakon interactions for MCH2 shows a new asymptotic feature. Namely, besides the expected soliton scattering behavior seen in overtaking and head-on peakon collisions, MCH2 also allows the phase shift of the peakon collision to diverge in certain parameter regimes.Comment: 25 pages, 11 figure

In silico clinical trials through AI and statistical model checking

A Virtual Patient (VP) is a computational model accounting for individualised (patho-) physiology and Pharmaco-Kinetics/Dynamics of relevant drugs. Availability of VPs is among the enabling technology for In Silico Clinical Trials. Here we shortly outline the state of the art as for VP generation and summarise our recent work on Artificial Intelligence (AI) and Statistical Model Checking based generation of VPs

Dynamic simulator and model predictive control of a milk pasteurizer

In this study, the design, optimization and dynamic modelling of a milk pasteurization unit have been developed, using the pseudo-component approach for describing milk properties. The fluid has been regarded as a mixture of five major categories, namely water, fats, proteins, carbohydrates, and minerals. Exploiting the optimal pasteurizer configuration, selected based on the total annualized cost, a dynamic model of the process has been also derived. The simulation of the system is then used as a virtual plant to develop a nonlinear model predictive control (NMPC) designed for rejecting the more important disturbances that can enter the system. The predicted trajectories have been calculated with a simplified version of the dynamic model, obtained by neglecting parameters temperature dependence. The NMPC performance has been compared with a PI controller in terms of set-point tracking and disturbance rejection. Similar results have been obtained when using the different control algorithms for the output responses, but the NMPC showed better behaviour of the manipulated variables