143 research outputs found

    Phase transitions and phase diagram of the ferroelectric perovskite NBT-BT by anelastic and dielectric measurements

    Full text link
    The complex elastic compliance and dielectric susceptibility of (Na_{0.5}Bi_{0.5})_{1-x}Ba_{x}TiO_{3} (NBT-BT) have been measured in the composition range between pure NBT and the morphotropic phase boundary included, 0 <= x <= 0.08. The compliance of NBT presents sharp peaks at the rhombohedral/tetragonal and tetragonal/cubic transitions, allowing the determination of the tetragonal region of the phase diagram, up to now impossible due to the strong lattice disorder and small distortions and polarizations involved. In spite of ample evidence of disorder and structural heterogeneity, the R-T transition remains sharp up to x = 0.06, whereas the T-C transition merges into the diffuse and relaxor-like transition associated with broad maxima of the dielectric and elastic susceptibilities. An attempt is made at relating the different features in the anelastic and dielectric curves to different modes of octahedral rotations and polar cation shifts. The possibility is also considered that the cation displacements locally have monoclinic symmetry, as for PZT near the morphotropic phase boundary.Comment: 11 pages, 9 figures, submitted to Phys. Rev.

    Business models, circular and green economy towards sustainability. A systematic literature review

    Get PDF
    The paper presents a systematic literature review (SLR) on the connection between business models and the adoption of the circular economy and the green economy towards sustainability. A classification is offered through which it is possible to understand the environmental, economic and social advantages that these components would be able to bring to the enterprise. We used the Scopus, Web of Science, PubMed and Google Scholar databases as the main source to collect papers. Initially, 387 papers were collected. Subsequently, we proceeded to review the contributions and, once the selection criteria were outlined, we analyzed and classified 84 publications as priorities. The SLR is performed through a bibliometric analysis using VOSviewer software. Finally, we elaborated the state of the art of this research topic for the future agenda

    Intangible assets management and digital transformation: evidence from intellectual property rights-intensive industries

    Get PDF
    Purpose: This study aims to investigate the impact of digital technologies for intangible assets management. The authors analyse how technological innovations and regulations of intellectual property affect business models of companies or intellectual property rights (IPR) intensive industries to determine the impact of digital transformation on intangible assets management, highlighting emerging issues and future effects of the digital technology revolution. Design/methodology/approach: The authors use a case study method to answer our research questions. The authors use Soundreef SpA as our case study, a collecting company that develops technology for monitoring, collecting and maximising the earnings of songwriters and music publishers. The authors also elaborate and adopt the framework of the enhanced intellectual capital as the theoretical lens for presenting and analysing our case study, determining how the digital transformation caused business model innovation and more transparent and timely performance measurement in copyright-based companies. Findings: The analysis of Soundreef SpA’s business model allows us to demonstrate how using new technologies drives the performance measurement of copyright holders and improve the collecting societies’ performance, introducing a new key performance indicator. This turning point is made possible by digital transformation and regulatory change. In the IPR industry, copyright holders’ performance has never been calculated, so the distribution of copyright revenues was based on the criteria approved by governance bodies/management. Originality/value: In the study, the authors demonstrate that digital transformation is able to enhance the intellectual capital of IPR-intensive companies introducing new ways to manage intangible assets and to measure performance

    Probing ferroelectricity in highly conducting materials through their elastic response: persistence of ferroelectricity in metallic BaTiO3-d

    Full text link
    The question whether ferroelectricity (FE) may coexist with a metallic or highly conducting state, or rather it must be suppressed by the screening from the free charges, is the focus of a rapidly increasing number of theoretical studies and is finally receiving positive experimental responses. The issue is closely related to the thermoelectric and multiferroic (also magnetic) applications of FE materials, where the electrical conductivity is required or spurious. In these circumstances, the traditional methods for probing ferroelectricity are hampered or made totally ineffective by the free charges, which screen the polar response to an external electric field. This fact may explain why more than 40 years passed between the first proposals of FE metals and the present experimental and theoretical activity. The measurement of the elastic moduli, Young's modulus in the present case, versus temperature is an effective method for studying the influence of doping on a FE transition because the elastic properties are unaffected by electrical conductivity. In this manner, it is shown that the FE transitions of BaTiO3-d are not suppressed by electron doping through O vacancies; only the onset temperatures are depressed, but the magnitudes of the softenings, and hence of the piezoelectric activity, are initially even increased

    Hydrogen absorption properties of amorphous (Ni0.6Nb0.4−yTay)100−xZrx membranes

    Get PDF
    Ni based amorphous materials have great potential as hydrogen purification membranes. In the present work the melt spun (Ni0.6Nb0.4−yTay)100−xZrx with y=0, 0.1 and x=20, 30 was studied. The result of X-ray diffraction spectra of the ribbons showed an amorphous nature of the alloys. Heating these ribbons below T < 400 °C, even in a hydrogen atmosphere (1−10 bar), the amorphous structure was retained. The crystallization process was characterized by differential thermal analysis and the activation energy of such process was obtained. The hydrogen absorption properties of the samples in their amorphous state were studied by the volumetric method, and the results showed that the addition of Ta did not significantly influence the absorption properties, a clear change of the hydrogen solubility was observed with the variation of the Zr content. The values of the hydrogenation enthalpy changed from ~37 kJ/mol for x=30 to ~9 kJ/mol for x=20. The analysis of the volumetric data provides the indications about the hydrogen occupation sites during hydrogenation, suggesting that at the beginning of the absorption process the deepest energy levels are occupied, while only shallower energy levels are available at higher hydrogen content, with the available interstitial sites forming a continuum of energy levels

    Effect of doping and oxygen vacancies on the octahedral tilt transitions in the BaCeO3 perovskite

    Full text link
    We present a systematic study of the effect of Y doping and hydration level on the structural transformations of BaCeO3 based on anelastic spectroscopy experiments. The temperature of the intermediate transformation between rhombohedral and orthorhombic Imma phases rises with increasing the molar fraction x of Y roughly as (500 K)x in the hydrated state, and is depressed of more than twice that amount after complete dehydration. This is explained in terms of the effect of doping on the average (Ce/Y)-O and Ba-O bond lengths, and of lattice relaxation from O vacancies. The different behavior of the transition to the lower temperature Pnma orthorhombic phase is tentatively explained in terms of progressive flattening of the effective shape of the OH ion and ordering of the O vacancies during cooling.Comment: 8 pages, 5 figure

    Temperature and pressure dependence of the infrared spectrum of 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid

    Get PDF
    The infrared absorption spectrumof 1-ethyl-3-methylimidazoliumtrifluoromethanesulfonate (EMI-TfO) was investigated at ambient pressure and variable temperatures between 120 and 330 K, or at roomtemperature and variable pressures up to 10 GPa. Upon cooling, the ionic liquid crystallizes; on the contrary, upon compression no evidence of crystallization can be obtained from the infrared spectra. Moreover, Density Functional Theory (DFT) calculations were applied to gain a better description of the ionic couple. The !B97X-D functional, including not only the empirical dispersion corrections but also the presence of a polar solvent, gives a good agreement with the infrared spectrum and suggests that TfO resides above the plane of the imidazolium, with the shorter distance between the O atom of the anion and the C2 atom of the imidazolium ring equal to 2.23 A

    Molecular assembling in mixtures of hydrophilic 1-butyl-1-methylpyrrolidinium dicyanamide ionic liquid and water

    Get PDF
    The infrared absorbance spectrum of the ionic liquid 1-butyl-1-methylpyrrolidinium dicyanamide, mixed with water at two different concentrations, was measured between 160 and 300 K in the mid infrared range. Both mixtures do not crystallize on cooling; however, remarkably, the one with an ionic liquid (IL):water composition of 1:3 displays a cold crystallization process on heating in a restricted temperature range between 240 and 250 K. A portion of the water participates to the cold crystallization. On the contrary, with an IL:water composition of 1:6.6 no crystallization takes place. Upon water addition the vibration frequencies of the anion and of some lines of the cation are blue shifted, while the absorption lines of water are red shifted. These facts are interpreted as the evidence of the occurrence of the hydrogen bonding of water, as the hydrogen bonding acceptor with respect to the anion (anion···O-H bonds develop) and as hydrogen donor for the cation (C-H···O bonds can form). Microscopic inhomogeneities in the samples and their evolution with temperature are discussed

    Low Frequency Mechanical Spectroscopy Study of Three Pyrrolidinium Based Ionic Liquids

    Get PDF
    Abstract In this work we present our recent results on three ionic liquids (ILs), which share bis(trifluoromethanesulfonyl)imide (TFSI) as anion and have different pyrrolidinium based cations. By means of a combination of mechanical spectroscopy and thermal analysis, many of the physical processes occurring during cooling down from the liquid phase, can be studied. Depending both on the diverse cation and the different thermal history, crystallization from the melt or glass transition, cold-crystallization, solid-solid phase transitions and thermally activated processes are observed. In one of the ILs, which could be easily undercooled, a prominent thermally activated peak could be observed above the glass transition. The temperature dependence of the relaxation time is approximated by a Vogel-Fulcher-Tamman equation, as usual for fragile glass forming liquids, and the apparent activation energy of W = 0.36 eV with a pre-exponential factor of the relaxation time τ0 = 1.7 · 10−13s were derived supposing jumps between asymmetrical potential wells. The kinetics of the crystallization processes have been studied in the framework of the Johnson-Mehl-Avrami-Kolmogorov theory and the Avrami parameters have been derived for both the crystallization from the melt and for the cold crystallization observed on heating

    Structure and vibrational features of the protic ionic liquid 1,8-diazabicyclo[5.4.0]-undec-7-ene-8-ium bis(trifluoromethanesulfonyl)amide, [DBUH][TFSI]

    Get PDF
    The Protic Ionic Liquid (PIL) formed by neutralization of the super-strong base 1,7-diazabicyclo[5.4.0]undec-7-ene (DBU) with the super-strong acid bis(trifluoromethanesulfonyl)-imide (TFSI), indicated as [DBUH][TFSI], has been investigated. Its chemical physical properties and structural features have been explored using a synergy of experimental and computational tools. Molecular Dynamics-rationalised X-ray diffraction patterns highlight the major role played by hydrogen bonding (HB) in affecting morphology in this PIL. A comparison between HB features in this and in related PILs has been presented, on the base of far-IR experiments and DFT analysis. Indications of a weaker HB interaction in [DBUH][TFSI] in comparison with [DBUH][TfO], consistently with their ΔpKa difference, have been observed and rationalised in terms of geometrical properties of the main conformers contributing to the experimental spectra. In the liquid phase of [DBUH][TFSI] a particularly large conformational disorder is observed and the corresponding large dispersion of the frequencies of the HB stretching modes leads to a broad absorption band without a well defined peak. On the contrary, well detectable HB related absorptions are observable in the solid phase of [DBUH][TFSI] and at all temperatures in [DBU][TfO], where less configurational disorder occurs
    • …
    corecore