New methods for early diagnosis of ceramic failure in ceramic on ceramic hip prosthesis

L’accoppiamento articolare in ceramica è sempre più utilizzato in chirurgia protesica dell’anca per le sue eccellenti proprietà tribologiche. Tuttavia la fragilità della ceramica è causa di fallimenti meccanici. Abbiamo quindi condotto una serie di studi al fine di individuare un metodo efficace di diagnosi precoce del fallimento della ceramica. Abbiamo analizzato delle componenti ceramiche espiantate e abbiamo trovato un pattern di usura pre-frattura che faceva supporre una dispersione di particelle di ceramica nello spazio articolare. Per la diagnosi precoce abbiamo validato una metodica basata sulla microanalisi del liquido sinoviale. Per validare la metodica abbiamo eseguito un agoaspirato in 12 protesi ben funzionanti (bianchi) e confrontato i risultati di 39 protesi con segni di rottura con quelli di 7 senza segni di rottura. Per individuare i pazienti a rischio rottura i dati demografici di 26 pazienti con ceramica rotta sono stati confrontati con 49 controlli comparabili in termini demografici, tipo di ceramica e tipo di protesi. Infine è stata condotta una revisione sistematica della letteratura sulla diagnosi della rottura della ceramica. Nell’aspirato la presenza di almeno 11 particelle ceramiche di dimensioni inferiori a 3 micron o di una maggiore di 3 micron per ogni campo di osservazione sono segno di rottura della ceramica. La metodica con agoaspirato ha 100% di sensibilità e 88 % di specificità nel predire rotture della ceramica. Nel gruppo delle ceramiche rotte è stato trovato un maggior numero di malposizionamenti della protesi rispetto ai controlli (p=0,001). Il rumore in protesi con ceramica dovrebbe sollevare il sospetto di fallimento ed indurre ad eseguire una TC e un agoaspirato. Dal confronto con la letteratura la nostra metodica risulta essere la più efficace.Ceramic is increasingly used in total hip replacement for its excellent tribological properties. However, the brittleness of ceramics is of concern and mechanical failures are reported. We conducted a series of studies in order to identify an effective method of early diagnosis of ceramic failure. We have analyzed 20 ceramic components explanted and found a pattern of wear that would suggest a dispersion of ceramic particles in the joint space. We therefore investigated whether isolation, observation at scanning electron microscopy, and chemical identification with microanalysis of particles from synovial fluid could be predictive of ceramic damage. Firstly, the level of ‘‘physiological wear’’ of well functioning hip prostheses was assessed with this method, then the test was validated as diagnostic method for liner fracture. Twelve asymptomatic patients were enrolled to demonstrate the first aim; 39 cases of noisy hip, and 7 cases of pending failure not related to ceramic were enrolled for the second aim. To detect risk factors for ceramic liner fractures we compared 26 ceramic hips revised because of ceramic liner fracture with 49 well-functioning hips. Finally a systematic review was done to compare our results with those reported in the litterature. In the aspirate the presence of at least 11 ceramic particles of size less than 3 microns or the presence of one greater than 3 microns for each field of observation are a sign of ceramic failure. The method with fine needle aspiration has 100% sensitivity and 88% specificity in predicting breakage of the ceramic. A cup anteversion angle out of the optimal range of 15 ̊+/-10 ̊ was found to be a risk factor for ceramic liner fracture. There are no other diagnostic methodologies described in the literature as specific and sensible as the one we have proposed

Which stem in total hip arthroplasty for developmental hip dysplasia? A comparative study using a 3D CT-based software for pre-operative surgical planning

Background Stem choice in total hip arthroplasty (THA) for hip dysplasia is still controversial. The aims of the study were to evaluate (1) which stem design provided the highest percentage of adequate reconstructions in THA for dysplasia and (2) any correlation between the reconstructions provided by the stems and the native femoral morphology. Materials and methods 150 CT scans including 200 adult dysplastic hips were randomly selected. Using the 3D CT-based software Hip-Op for surgical planning, the native hip anatomy was studied. Then, a single wedge tapered stem, an anatomical stem and a conical tapered stem were simulated in every hip. An adequate reconstruction of hip biomechanics was obtained when combined anteversion, offset restoration, coronal and sagittal tilt, canal filling and leg lengthening were inside the normal ranges. Results Conical stems achieved the highest percentage of adequate reconstructions (87%, p < 0.0001). The anatomical stem was the worst performer. Single wedge and anatomical stem acceptability was mainly influenced by the combined anteversion. Stem anteversion was correlated with the femoral anteversion (fair correlation), the calcar femorale (fair) and the mediolateral femoral diameter at isthmus (poor). When the femoral anteversion was >= 25 degrees, combined anteversion was very acceptable for the conical stem (99.2%), whereas the rate of acceptable combined anteversion for the single wedge tapered stem was 71.4%, and that for the anatomical stem was 51.6% (p < 0.0001). Conclusions Stem choice in developmental hip dysplasia is mainly driven by appropriate combined anteversion, which is dependent on the coronal and axial femoral morphologies. As a rule of thumb, tapered stems are adequate when femoral anteversion is < 25 degrees; conical stems should be adopted for higher anteversions

ACL surgery: reasons for failure and management

Abstract Despite the general success of anterior cruciate ligament reconstructions (ACL-R), there are still studies reporting a high failure rate. Orthopedic surgeons are therefore increasingly confronted with the treatment of ACL retears, which are often accompanied by other lesions, such as meniscus tears and cartilage damage and which, if overlooked, can lead to poor postoperative clinical outcomes. The literature shows a wide variety of causes for ACL-R failure. Main causes are further trauma and possible technical errors during surgery, among which the position of the femoral tunnel is thought to be one of the most important. A successful postoperative outcome after ACL-revision surgery requires good preoperative planning, including a thorough evaluation of patient's medical history, e.g. instability during daily or sports activity, increased general joint laxity, and hints for a low-grade infection. A careful clinical examination should be performed. Additionally, comprehensive imaging is necessary. Besides a magnetic resonance imaging, a CT scan is helpful to determine location of tunnel apertures and to analyze for tunnel enlargement. A lateral knee radiograph is helpful to determine the tibial slope. The range of surgical options for the treatment of ACL-R failure is broad today. Orthopedic surgeons and experts in Sports Medicine must deal with various possible associated injuries of the knee or unfavorable anatomical conditions for ACL-R. The aim of this review was to highlight predictors and reasons of failures of ACL-R as well as describe diagnostic procedures to individualize treatment strategies for improved outcome after revision ACL-R. Keywords: ACL reconstruction; ACL revision; ACL revision management; causes of graft failure

Inflammatory Biomarkers and Gait Impairment in Older Adults: A Systematic Review

: Peripheral inflammation and gait speed alterations are common in several neurological disorders and in the aging process, but the association between the two is not well established. The aim of this systematic literary review is to determine whether proinflammatory markers are a positive predictor for gait impairments and their complications, such as falls in older adults, and may represent a risk factor for slow gait speed and its complications. The systematic review was performed in line with the Preferred Report Items for Systematic Review and Meta-Analyses (PRISMA). A protocol for literature searches was structured a priori and designed according to the International Perspective Register of Systemic Review (PROSPERO: CRD42023451108). Peer-reviewed original articles were identified by searching seven electronic databases: Excerpta Medica Database (EMBASE), SciVerse (ScienceDirect), Scopus, PubMed, Medline, Web of Science, and the Cochrane Library. The search strategy was formulated based on a combination of controlled descriptors and/or keywords related to the topic and a manual search was conducted of the reference lists from the initially selected studies to identify other eligible studies. The studies were thoroughly screened using the following inclusion criteria: older adults, spatiotemporal gait characteristics, and proinflammatory markers. A meta-analysis was not performed due to the heterogeneity of the studies, and the results were narratively synthesized. Due to the clinical and methodological heterogeneity, the studies were combined in a narrative synthesis, grouped by the type of biomarkers evaluated. A standardized data extraction form was used to collect the following methodological outcome variables from each of the included studies: author, year, population, age, sample size, spatiotemporal gait parameters such as gait velocity, and proinflammatory markers such as TNF-α, high sensitivity C-reactive (CRP) proteins, and IL-6. We included 21 out of 51 studies in our review, which examined the association between inflammatory biomarkers and gait impairment. This review highlights the role of TNF-α, CRP, and IL-6 in gait impairment. Biomarkers play an important role in the decision-making process, and IL-6 can be an effective biomarker in establishing the diagnosis of slow gait speed. Further longitudinal research is needed to establish the use of molecular biomarkers in monitoring gait impairment

Biopolymer Recovery from Aerobic Granular Sludge and Conventional Flocculent Sludge in Treating Industrial Wastewater: Preliminary Analysis of Different Carbon Routes for Organic Carbon Utilization

The recovery of biopolymers from sewage sludge could be a crucial step in implementing circular economy principles in wastewater treatment plants (WWTP). In this frame, the present study was aimed at evaluating the simultaneous production of polyhydroxyalkanoates (PHA) and extracellular polymeric substances (EPS) obtainable from the treatment of agro-industrial wastewater. Two biological enrichment systems, aerobic granular sludge (AGS) and a conventional activated sludge operating as a sequencing batch reactor (SBR), were monitored for 204 and 186 days, respectively. The maximum biopolymers accumulation capacity was close to 0.60 mgPHA-EPS gVSS−1 in the AGS when operating at 3 kgCODm−3d−1, whereas in the SBR, it was about half (0.35 mgPHA-EPS gVSS−1). Biopolymers extracted from the AGS were mainly constituted by EPS (>70%), whose percentage increased up to 95% with the OLR applied in the enrichment reactor. In contrast, SBR enabled obtaining a higher PHA production (50% of the biopolymers). Results suggested that organic carbon was mainly channeled toward metabolic pathways for extracellular storing in AGS, likely due to metabolic stressors (e.g., hydraulic selection pressure, shear forces) applied for promoting aerobic granulation

Fracture of Ceramic Bearing Surfaces following Total Hip Replacement: A Systematic Review

Ceramic bearing surfaces are increasingly used for total hip replacement, notwithstanding that concern is still related to ceramic brittleness and its possible mechanical failure. The aim of this systematic review is to answer three questions: (1) Are there risk factors for ceramic component fracture following total hip replacement? (2) Is it possible to perform an early diagnosis of ceramic component failure before catastrophic fracture occurs? (3) Is it possible to draw guidelines for revision surgery after ceramic components failure? A PubMed and Google Scholar search was performed and reference citations from publications identified in the literature search were reviewed. The use of 28\u2009mm short-neck femoral head carries an increased risk of fracture. Acetabular component malposition might increase the risk of ceramic liner fractures. Synovial fluid microanalysis and CT scan are promising in early diagnosis of ceramic head and liner failure. Early revision is suggested in case of component failure; no consensus exists about the better coupling for revision surgery. Ceramic brittleness remains a major concern. Due to the increased number of ceramic on ceramic implants, more revision surgeries and reports on ceramic components failure are expected in the future. An algorithm of diagnosis and treatment for ceramic hip failure is proposed

A case-driven hypothesis for multi-stage crack growth mechanism in fourth-generation ceramic head fracture

Background Ceramic bearings are used in total hip arthroplasty due to their excellent wear behaviour and biocompatibility. The major concern related to their use is material brittleness, which significantly impacts on the risk of fracture of ceramic components. Fracture toughness improvement has contributed to the decrease in fracture rate, at least of the prosthetic head. However, the root cause behind these rare events is not fully understood. This study evaluated head fracture occurrence in a sizeable cohort of patients with fourth-generation ceramic-on-ceramic implants and described the circumstances reported by patients in the rare cases of head fracture. Methods The clinical survivorship of 29,495 hip prostheses, with fourth-generation ceramic bearings, was determined using data from a joint replacement registry. The average follow-up period was 5.2 years (range 0.1-15.6). Retrieval analysis was performed in one case for which the ceramic components were available. Results Clinical outcomes confirmed the extremely low fracture rate of fourth-generation ceramic heads: only two out of 29,495 heads fractured. The two fractures, both involving 36 mm heads, occurred without a concurrent or previous remarkable trauma. Considering the feature of the fractured head, a multi-stage crack growth mechanism has been hypothesized to occur following damage at the head-neck taper interface. Conclusions Surgeons must continue to pay attention to the assembly of the femoral head: achieving a proper head seating on a clean taper is a prerequisite to decrease the risk of occurrence of any damage process within head-neck junction, which may cause high stress concentration at the contact surface, promoting crack nucleation and propagation even in toughened ceramics

Early detection of hip periprosthetic joint infections through CNN on Computed Tomography images

Early detection of an infection prior to prosthesis removal (e.g., hips, knees or other areas) would provide significant benefits to patients. Currently, the detection task is carried out only retrospectively with a limited number of methods relying on biometric or other medical data. The automatic detection of a periprosthetic joint infection from tomography imaging is a task never addressed before. This study introduces a novel method for early detection of the hip prosthesis infections analyzing Computed Tomography images. The proposed solution is based on a novel ResNeSt Convolutional Neural Network architecture trained on samples from more than 100 patients. The solution showed exceptional performance in detecting infections with an experimental high level of accuracy and F-score

Preoperative and postoperative risk factors for periprosthetic joint infection in primary total hip arthroplasty: A 1-year experience

BACKGROUND Periprosthetic joint infection (PJI) in primary total hip replacement (THR) is one of the most important threats in orthopedic surgery, so one important surgeon's target is to avoid or early diagnose a PJI. Although the incidence of PJI is very low (0.69%) in our department, with an average follow-up of 595 d, this infection poses a serious threat due to the difficulties of treatment and the lower functional outcomes after healing. AIM To study the incidence of PJI in all operations occurring in the year 2016 in our department to look for predictive signs of potential infection. METHODS We counted 583 THR for 578 patients and observed only 4 cases of infection (0.69%) with a mean follow-up of 596 d (min 30, max 1451). We reviewed all medical records to collect the data: duration and time of the surgery, presence, type and duration of the antibiotic therapy, preoperative diagnosis, blood values before and after surgery, transfusions, presence of preoperative drugs (in particularly anticoagulants and antiaggregant, corticosteroids and immunosuppressants), presence of some comorbidities (high body mass index, blood hypertension, chronic obstructive pulmonary disease, cardiac ischemia, diabetes, rheumatological conditions, previous local infections). RESULTS No preoperative, intraoperative, or postoperative analysis showed a higher incidence of PJI. We did not find any class with evident major odds of PJI. In our study, we did not find any border value to predict PJI and all patients had similar values in both groups (non-PJI and PJI). Only some categories, such as female patients, showed more frequency of PJI, but this difference related to sex was not statistically significant. CONCLUSION We did not find any category with a higher risk of PJI in THR, probably due to the lack of few cases of infection