Assessing the Performance of Recent Density Functionals for Bulk Solids

We assess the performance of recent density functionals for the exchange-correlation energy of a nonmolecular solid, by applying accurate calculations with the GAUSSIAN, BAND, and VASP codes to a test set of 24 solid metals and non-metals. The functionals tested are the modified Perdew-Burke-Ernzerhof generalized gradient approximation (PBEsol GGA), the second-order GGA (SOGGA), and the Armiento-Mattsson 2005 (AM05) GGA. For completeness, we also test more-standard functionals: the local density approximation, the original PBE GGA, and the Tao-Perdew-Staroverov-Scuseria (TPSS) meta-GGA. We find that the recent density functionals for solids reach a high accuracy for bulk properties (lattice constant and bulk modulus). For the cohesive energy, PBE is better than PBEsol overall, as expected, but PBEsol is actually better for the alkali metals and alkali halides. For fair comparison of calculated and experimental results, we consider the zero-point phonon and finite-temperature effects ignored by many workers. We show how Gaussian basis sets and inaccurate experimental reference data may affect the rating of the quality of the functionals. The results show that PBEsol and AM05 perform somewhat differently from each other for alkali metal, alkaline earth metal and alkali halide crystals (where the maximum value of the reduced density gradient is about 2), but perform very similarly for most of the other solids (where it is often about 1). Our explanation for this is consistent with the importance of exchange-correlation nonlocality in regions of core-valence overlap.Comment: 32 pages, single pdf fil

Coil optimization for electromagnetic levitation using a genetic like algorithm

he technique of electromagnetic levitation (EML) provides a means for thermally processing an electrically conductive specimen in a containerless manner. For the investigation of metallicliquids and related melting or freezing transformations, the elimination of substrate-induced nucleation affords access to much higher undercooling than otherwise attainable. With heating and levitation both arising from the currents induced by the coil, the performance of any EML system depends on controlling the balance between lifting forces and heating effects, as influenced by the levitation coil geometry. In this work, a genetic algorithm is developed and utilized to optimize the design of electromagnetic levitation coils. The optimization is targeted specifically to reduce the steady-state temperature of the stably levitated metallic specimen. Reductions in temperature of nominally 70 K relative to that obtained with the initial design are achieved through coil optimization, and the results are compared with experiments foraluminum. Additionally, the optimization method is shown to be robust, generating a small range of converged results from a variety of initial starting conditions. While our optimizationcriterion was set to achieve the lowest possible sample temperature, the method is general and can be used to optimize for other criteria as well

Force-matched embedded-atom method potential for niobium

Large-scale simulations of plastic deformation and phase transformations in alloys require reliable classical interatomic potentials. We construct an embedded-atom method potential for niobium as the first step in alloy potential development. Optimization of the potential parameters to a well-converged set of density-functional theory (DFT) forces, energies, and stresses produces a reliable and transferable potential for molecular dynamics simulations. The potential accurately describes properties related to the fitting data, and also produces excellent results for quantities outside the fitting range. Structural and elastic properties, defect energetics, and thermal behavior compare well with DFT results and experimental data, e.g., DFT surface energies are reproduced with less than 4% error, generalized stacking-fault energies differ from DFT values by less than 15%, and the melting temperature is within 2% of the experimental value.Comment: 17 pages, 13 figures, 7 table

Thermoelastic dissipation in inhomogeneous media: loss measurements and displacement noise in coated test masses for interferometric gravitational wave detectors

The displacement noise in the test mass mirrors of interferometric gravitational wave detectors is proportional to their elastic dissipation at the observation frequencies. In this paper, we analyze one fundamental source of dissipation in thin coatings, thermoelastic damping associated with the dissimilar thermal and elastic properties of the film and the substrate. We obtain expressions for the thermoelastic dissipation factor necessary to interpret resonant loss measurements, and for the spectral density of displacement noise imposed on a Gaussian beam reflected from the face of a coated mass. The predicted size of these effects is large enough to affect the interpretation of loss measurements, and to influence design choices in advanced gravitational wave detectors.Comment: 42 pages, 7 figures, uses REVTeX

Reduction of thermal fluctuations in a cryogenic laser interferometric gravitational wave detector

The thermal fluctuation of mirror surfaces is the fundamental limitation for interferometric gravitational wave (GW) detectors. Here, we experimentally demonstrate for the first time a reduction in a mirror's thermal fluctuation in a GW detector with sapphire mirrors from the Cryogenic Laser Interferometer Observatory at 17\,K and 18\,K. The detector sensitivity, which was limited by the mirror's thermal fluctuation at room temperature, was improved in the frequency range of 90\,Hz to 240\,Hz by cooling the mirrors. The improved sensitivity reached a maximum of $2.2 \times 10^{-19}\,\textrm{m}/\sqrt{\textrm{Hz}}$ at 165\,Hz.Comment: Accepted for publication in Physical Review Letters, 5 pages, 2 figure

Thermodynamic properties and structural stability of thorium dioxide

Using density functional theory (DFT) calculations, we have systematically investigated the thermodynamic properties and structural stabilities of thorium dioxide (ThO$_2$). Based on the calculated phonon dispersion curves, we calculate the thermal expansion coefficient, bulk modulus, and heat capacities at different temperatures for ThO$_2$ under the quasi-harmonic approximation. All the results are in good agreement with corresponding experiments proving the validity of our methods. Our theoretical studies can help people more clearly understand the thermodynamic behaviors of ThO$_2$ at different temperatures. In addition, we have also studied possible defect formations and diffusion behaviors of helium in ThO$_2$, to discuss its structural stability. It is found that in intrinsic ThO$_2$ without any Fermi energy shifts, the interstitial Th$_i^{4+}$ defect other than oxygen or thorium vacancies, interstitial oxygen, and any kinds of Frenkel pairs, is most probable to form with an energy release of 1.74 eV. However, after upshifting the Fermi energy, the formation of the other defects also becomes possible. For helium diffusion, we find that only through the thorium vacancy can it happen with the small energy barrier of 0.52 eV. Otherwise, helium atoms can hardly incorporate or diffuse in ThO$_2$. Our results indicate that people should prevent upshifts of the Fermi energy of ThO$_2$ to avoid the formation of thorium vacancies and so as to prevent helium caused damages.Comment: 11 pages, 11 figure

Melting of tantalum at high pressure determined by angle dispersive x-ray diffraction in a double-sided laser-heated diamond-anvil cell

The high pressure and high temperature phase diagram of Ta has been studied in a laser-heated diamond-anvil cell (DAC) using x-ray diffraction measurements up to 52 GPa and 3800 K. The melting was observed at nine different pressures, being the melting temperature in good agreement with previous laser-heated DAC experiments, but in contradiction with several theoretical calculations and previous piston-cylinder apparatus experiments. A small slope for the melting curve of Ta is estimated (dTm/dP = 24 K/GPa at 1 bar) and a possible explanation for this behaviour is given. Finally, a P-V-T equation of states is obtained, being the temperature dependence of the thermal expansion coefficient and the bulk modulus estimated.Comment: 31 pages, 8 figures, to appear in J.Phys.:Cond.Matte

Enhanced Group Analysis and Exact Solutions of Variable Coefficient Semilinear Diffusion Equations with a Power Source

A new approach to group classification problems and more general investigations on transformational properties of classes of differential equations is proposed. It is based on mappings between classes of differential equations, generated by families of point transformations. A class of variable coefficient (1+1)-dimensional semilinear reaction-diffusion equations of the general form $f(x)u_t=(g(x)u_x)_x+h(x)u^m$ ($m\ne0,1$) is studied from the symmetry point of view in the framework of the approach proposed. The singular subclass of the equations with $m=2$ is singled out. The group classifications of the entire class, the singular subclass and their images are performed with respect to both the corresponding (generalized extended) equivalence groups and all point transformations. The set of admissible transformations of the imaged class is exhaustively described in the general case $m\ne2$. The procedure of classification of nonclassical symmetries, which involves mappings between classes of differential equations, is discussed. Wide families of new exact solutions are also constructed for equations from the classes under consideration by the classical method of Lie reductions and by generation of new solutions from known ones for other equations with point transformations of different kinds (such as additional equivalence transformations and mappings between classes of equations).Comment: 40 pages, this is version published in Acta Applicanda Mathematica

Dynamical properties of Au from tight-binding molecular-dynamics simulations

We studied the dynamical properties of Au using our previously developed tight-binding method. Phonon-dispersion and density-of-states curves at T=0 K were determined by computing the dynamical-matrix using a supercell approach. In addition, we performed molecular-dynamics simulations at various temperatures to obtain the temperature dependence of the lattice constant and of the atomic mean-square-displacement, as well as the phonon density-of-states and phonon-dispersion curves at finite temperature. We further tested the transferability of the model to different atomic environments by simulating liquid gold. Whenever possible we compared these results to experimental values.Comment: 7 pages, 9 encapsulated Postscript figures, submitted to Physical Review