Nanochromics: old materials, new structures and architectures for high performance devices

Due to the development of nanoscience, the interest in electrochromism has increased and new assemblies of electrochromic materials at nanoscale leading to higher efficiencies and chromatic contrasts, low switching times and the possibility of color tuning have been developed. These advantages are reached due to the extensive surface area found in nanomaterials and the large amount of organic electrochromic molecules that can be easily attached onto inorganic nanoparticles, as TiO2 or SiO2. Moreover, the direct contact between electrolyte and nanomaterials produces high ionic transfer rates, leading to fast charge compensation, which is essential for high performance electrochromic electrodes. Recently, the layer-by-layer technique was presented as an interesting way to produce different architectures by the combination of both electrochromic nanoparticles and polymers. The present paper shows some of the newest insights into nanochromic science.Com o desenvolvimento da nanociência, o estudo do fenômeno do eletrocromismo desperta forte e continuado interesse devido à possibilidade de obter maiores eficiências eletrocrômicas, contrastes cromáticos, sintonização de cores e baixos tempos de resposta por meio da montagem de nanomateriais. Estas vantagens são possíveis devido à alta área superficial que os nanomateriais possuem e a enorme quantidade de moléculas orgânicas eletrocrômicas que podem ser facilmente ligadas a nanopartículas inorgânicas como TiO2 ou SiO2. Somado a isto, o contato direto entre o eletrólito e os nanomateriais produz altas velocidades de transferência iônica, com a concomitante compensação de carga rápida, o que é essencial para preparar eletrodos eletrocrômicos de alto desempenho. Recentemente a técnica de deposição eletrostática camada por camada foi apresentada como uma maneira interessante de preparar diferentes arquiteturas combinando nanopartículas e polímeros. O presente trabalho mostra alguns dos últimos avanços em nanocromismo.FAPESPCNPqInstituto do Milênio de Materiais Complexo

Spectroscopic characterization and investigation of the dynamic of charge compensation process of supramolecular films derived from tetra-2-pyridyl-1,4-pyrazine ligand

This work describes the infrared spectroscopy characterization and the charge compensation dynamics in supramolecular film FeTPPZFeCN derived from tetra-2-pyridyl-1,4-pyrazine (TPPZ) with hexacyanoferrate, as well as the hybrid film formed by FeTPPZFeCN and polypyrrole (PPy). For supramolecular film, it was found that anion flux is greater in a K+ containing solution than in Li+ solution, which seems to be due to the larger crystalline ionic radius of K+. The electroneutralization process is discussed in terms of electrostatic interactions between cations and metallic centers in the hosting matrix. The nature of the charge compensation process differs from others modified electrodes based on Prussian blue films, where only cations such as K+ participate in the electroneutralization process. In the case of FeTPPZFeCN/PPy hybrid film, the magnitude of the anions’s flux is also dependent on the identity of the anion of the supporting electrolyte.Este trabalho descreve a caracterização espectroscópica por infravermelho e o estudo da dinâmica de compensação de cargas do filme supramolecular FeTPPZFeCN derivado do ligante tetra-2-piridil-1,4-pirazina (TPPZ) com hexacianoferrato, bem como o filme híbrido envolvendo FeTPPZFeCN e uma matriz de polipirrol (PPy). Para o filme supramolecular, foi observado um aumento no fluxo de ânion em solução contendo K+ em relação ao Li+, que parece estar relacionado ao tamanho do raio iônico cristalino do K+. O processo de eletroneutralização é discutido em termos de interação eletrostática entre cátions e centros metálicos na matriz hospedeira. A natureza do processo de compensação de carga difere de outros eletrodos modificados derivados do azul da Prússia, onde somente cátions tais como K+ participam no processo de eletroneutralização. No caso do filme híbrido FeTPPZFeCN/PPy, a magnitude do fluxo de ânions é também dependente da identidade do ânion em diferentes eletrólitos de suporte.FAPESPConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES)SP

Conducting polymer- hydrogel blends for electrochemically controlled drug release devices

Blends formed by electrochemical polymerization of polypyrrole (PPy) into polyacrylamide (PAAm) hydrogels were used as devices for controlled drug release. The influence of several parameters in the synthesis, such as type of hydrogel matrix and polymerization conditions was studied by using a fractional factorial design. The final goal was to obtain an adequate device for use in controlled release tests, based on electrochemical potential control. For controlled release tests, Safranin was used as model drug and release curves (amount of drug vs. time) have shown that these blends are promising materials for this use. The optimized blends obtained were characterized by cyclic voltammetry and Raman spectroscopy.Blendas formadas pela polimerização eletroquímica de pirrol em matriz de acrilamida (hidrogel) foram utilizadas, neste trabalho, como dispositivos para a liberação controlada de drogas. A influência de vários parâmetros nesta síntese, como tipo de matriz de hidrogel e condições de polimerização, foi estudada empregando-se planejamento fatorial fracionário. O objetivo final consistiu na obtenção de um material adequado para liberação baseada no controle de potencial. Para os testes de liberação foi utilizada Safranina, como substância modelo. As curvas de liberação demonstram a potencialidade do uso de tais dispositivos. Estes dispositivos foram também caracterizados por espectroscopia Raman e voltametria cíclica.FAPESPCNP

Advances in Conducting, Biodegradable and Biocompatible Copolymers for Biomedical Applications

Electroactive biomaterials are a new generation of “smart” biomaterials based on intrinsically conducting polymers (ICP). Among them, poly(3,4-ethylenedioxythiophene) (PEDOT), polypyrrole (PPy) and polyaniline (PANI) are well known conducting polymers that present excellent electrical and optical properties emerging as main candidates for potential biomedical applications. Additionally, the biodegradability of biomaterials is very useful and desirable. In this context, biodegradable polymers based on polyesters, such as poly(D,L-lactic acid) (PDLLA), polycaprolactone (PCL), and poly(glycolic acid) (PGA) appear to be promising candidates because of their good biocompatibility and, as a consequence, they have been attracting attention as sustainable alternatives for applications in medicine. Weak molecular interaction with cells, biocompatibility, biodegradability, mechanics and topography are some of the main challenges for the use of conducting polymers as biomaterials. In order to improve their own biocompatibility, the main strategies are whether by doping with specific counter ions (biodopants) or chemically modifying the monomers with different molecules. Although conventional ICPs still present low or none biodegradability, there are relatively few examples of biodegradable electroactive polymers in the literature. Recently, novel approaches have been applied to solve the problem of lack of biodegradability of conducting polymers, mainly through (1) synthesis of a modified electroactive oligomers connected via degradable ester linkages creating block copolymers and (2) synthesis of modified electroactive and biodegradable macromonomers based on polyesters used in a second step copolymerization with conductive monomers. This mini-review focuses on developing trends, challenges and summarizes the recent advances on synthesis of conducting, biodegradable and biocompatible copolymers in terms of optimizing the chemical properties to improved response toward different cells, aiming biomedical applications

Macroporous MnO2 electrodes obtained by template assisted electrodeposition for electrochemical capacitors

Macroporous MnO2 electrodes prepared by template-assisted electrodeposition using spherical polystyrene colloidal particles are studied. The wettability of such electrodes by a LiClO4 aqueous electrolyte is measured by the contact angle technique. Cyclic voltammetry experiments are performed in order to evaluate the use of these electrodes for electrochemical capacitor applications. The specific capacity obtained is about 60% higher than that obtained for flat MnO2 surfaces showing that, in spite of the wettability being lower, some penetration of the electrolyte into the pores must occur, increasing the electroactive area with respect to the flat electrode. Furthermore, the macroporous electrode showed excellent electrochemical stability, with neither a capacitance decrease nor a loss of morphology, after 1000 cycles