1 research outputs found
Investigation of the effect of nano tube in arcan tests
Dünyada en çok kullanılan yapı malzemelerinden biri de betondur. Bunun nedenlerinin
başında, betonun istenilen dayanım ve dayanıklılığı çoğu zaman sağlaması gelmektedir.
Ancak baz durumlarda geleneksel beton istenilen dayanımı sağlayamamaktadır. Bu
durumda, bazı katkılarla betonun dayanımının yükseltilmesine ihtiyaç duyulmaktadır. Bu
katkılardan biri de nano malzemelerdir. Nano malzemelerin geleneksel betonun çekme
dayanımına etkisini araştırmak için yapılan bu çalışmada 36 adet nano malzeme katkılı ve
36 adet nano malzeme katkısız olmak üzere toplam 72 adet çekme prizması imal edilmiştir.
Her dökümdeki numune say s 12 adedi nano malzeme katkılı ve 12 adedi nano malzeme
katkısız olmak üzere toplam 24'tür. Üç dökümde imal edilen numunelerin bir dökümüne
daha homojen karışım oluşmasına yardımcı olduğu düşünülen sürfaktant ilave edilmiştir.
Daha sonra numuneler her dökümde dörtlü gruplara ayrılmış ve her gruba numune
yüksekliğinin %25'i, %32'i ve %64'ü olmak üzere 3 farklı çentik açılmıştır. Geliştirilmiş
Arcan deneyinde çekmeye tabii tutulan bu numunelerin en büyük yük ve yer değiştirme
de erleriyle kırılma süreleri kaydedilmiştir. Farklı dökümlerde imal edilen, aynı çentik
boyundaki numuneler yaşlarına göre yük ve yer değiştirme değerleri açısından
karşılaştırılmıştır. Sürfaktant içeren numuneler sürfaktant içermeyen numunelerle dayanım
ve yer değiştirme değerleri açısından karşılaştırılmıştır. Ayrıca farklı çentik boylarının
çekme dayanımına ve kırılma hattına etkisi incelenmiştir.One of the most widely used construction materials in the world is concrete. In the
beginning of these reasons are desired strength and durability often comes. However, in
some cases, the conventional concrete can not provide the desired strength. In this case,
some contributions are needed to raise the concrete strength. One of these additives is nano
materials. 36 pieces doped nano materials and 36 pieces pure nano materials totaling 72
tensile prisms have been manufactured to intestigate the effect of nano materials to tensile
strength of conventional concretes. The samples number in every casting was 12 pieces
doped nano materials and 12 pieces pure nano materials totaling 24. Surfactant that was
thought to help more homogenous mixture added in three castings. Samples were then
divided into four groups and three different notch were opened to each groups sample
height's of 25%, 32% and 64%. The maximum load, displacement and fracture times of
samples that subjected to tensile test in Modified Arcan Test. The samples that have the
same notch lengths and different castings were compared according to their ages with their
load and displacement values. The samples with surfactant and the samples without
surfactant were compared strength and displacement values. Also, the effect of different
notch lengths to tensile strength and fracture line was inspected