70 research outputs found
Biodegradable active coating from chitosan/astaxanthin crosslinked with genipin to improve water resistance, moisture and oxygen barrier and mechanical properties of Kraft paper
International audienceAn active chitosan-based coating with an addition of a natural antioxidant and a natural crosslinker has been applied to improve the performance of Kraft paper. Coatings, including chitosan (CS), CS crosslinked with 1.5 % genipin (CS-1.5G), CS containing 1 % astaxanthin (CSA) and CSA crosslinked with 1 % genipin (CSA-1G) were coated on Kraft paper. Uncoated and coated papers were then evaluated for water content (WC), water vapor permeability (WVP), contact angle, oxygen permeability (OP), tensile strength (TS), bursting strength and elongation at break (EAB). Results indicated that the coating improved the properties of paper because an active coating could close and fill cavities between celluloses. When compared with CS-coated paper, WC and WVP value of CSA-1G-coated paper decreased significantly by 40 % and 24 %, respectively. The lowest OP was also observed in CSA-1G-coated paper. CSA- and CSA-1G-coated paper had contact angle values >100°, indicating hydrophobic nature of coated paper surface. All coatings largely improved TS of the paper (by 182-224 %) whereas CS-1.5G and CSA-1G significantly improved the bursting strength of the paper. The developed genipin-crosslinked chitosan-based coating enriched with astaxanthin can improve the functional properties of Kraft paper and thus will facilitate the usage of the paper for food packaging applications
Polysaccharide-Based Active Coatings Incorporated with Bioactive Compounds for Reducing Postharvest Losses of Fresh Fruits
This review reports recently published research related to the application of polysaccharide-based biodegradable and edible coatings (BECs) fortified with bioactive compounds obtained from plant essential oils (EOs) and phenolic compounds of plant extracts. Combinations of polysaccharides such as starches, pectin, alginate, cellulose derivatives, and chitosan with active compounds obtained from clove, lemon, cinnamon, lavender, oregano, and peppermint have been documented as potential candidates for biologically active coating materials for retardation of quality changes in fresh fruits. Additionally, polysaccharide-based active coatings supplemented with plant extracts such as cashew leaves, pomegranate peel, red roselle, apple fiber, and green tea extracts rich in phenolic compounds and their derivatives have been reported to be excellent substituents to replace chemically formulated wax coatings. Moreover, EOs and plant polyphenolics including alcohols, aldehydes, ketones phenols, organic acids, terpenes, and esters contain hydroxyl functional groups that contribute bioactivity to BECs against oxidation and reduction of microbial load in fresh fruits. Therefore, BECs enriched with active compounds from EOs and plant extracts minimize physiological and microbial deterioration by reducing moisture loss, softening of flesh, ripening, and decay caused by pathogenic bacterial strains, mold, or yeast rots, respectively. As a result, shelf life of fresh fruits can be extended by employing active polysaccharide coatings supplemented with EOs and plant extracts prior to postharvest storage
Moisture Sorption Isotherms and Prediction Models of Carboxymethyl Chitosan Films from Different Sources with Various Plasticizers
Carboxymethyl chitosan (CMCH) from different chitosan sources (shrimp, crab, and squid) and molecular sizes (polymer and oligomer) were synthesized via carboxymethylation reaction. The CMCH films were prepared by solution casting. All the CMCH films had high water solubility, higher than 85% of the dry matter of the films. The sorption isotherm of the CMCH films was evaluated at several values of relative humidity (0% RH, 23% RH, 34% RH, 43% RH, 65% RH, 77% RH, and 86% RH) at 25 ± 1°C. The equilibrium moisture content values of all the CMCH films were low at lower aw but increased considerably above aw = 0.65. The sigmoidal moisture sorption isotherms of this product can be classified as type II. Understanding of sorption isotherms is an important prerequisite for the prediction of moisture sorption properties of films via moisture sorption empirical models. The experimental data were analyzed and fitted by the nine sorption models. The various constants determined by linear fitting of the sorption equation with r2 values were in the range of 0.7647 to 0.999. The GAB model was found to be the best-fitted model for CMCH films (aw = 0.23–0.86, 25 ± 1°C), and the model presented the optimal root-mean-square percentage error (%RMS) values when compared with other models. In conclusion, it can be stated that the GAB model was found to be better estimated for predicting the CMCH films than other models. Therefore, the constant derived from different sorption models were applied for use in terms of information and for the determination of the stability of CMCH packaging films for specific end uses
Extraction and Characterization of Cellulose from Agricultural By-Products of Chiang Rai Province, Thailand
International audienceCellulose is an abundant component of the plant biomass in agricultural waste valorization that may be exploited to mitigate the excessive use of synthetic non-biodegradable materials. This work aimed to investigate the cellulose utilized by alkaline extraction with a prior bleaching process from rice straw, corncob, Phulae pineapple leaves, and Phulae pineapple peels. The bleaching and alkaline extraction process was performed using 1.4% acidified sodium chlorite (NaClO2) and 5% potassium hydroxide (KOH) in all the samples. All the samples, without and with the alkaline process, were characterized for their physico-chemical, microstructure, thermal properties and compared to commercial cellulose (COM-C). The extraction yield was the highest in alkaline-extracted cellulose from the corncob (AE-CCC) sample (p < 0.05), compared to the other alkaline-treated samples. The undesired components, including mineral, lignin, and hemicellulose, were lowest in the AE-CCC sample (p < 0.05), compared to raw and alkaline-treated samples. The microstructure displayed the flaky AE-CCC structure that showed a similar visibility in terms of morphology with that of the alkaline-treated pineapple peel cellulose (AE-PPC) and COM-C samples compared to other alkaline-treated samples with a fibrous structure. Fourier Transform Infrared (FTIR) and X-ray Diffraction (XRD) of AE-CCC samples showed the lowest amorphous regions, possibly due to the elimination of hemicellulose and lignin during bleaching and alkaline treatment. The highest crystallinity index obtained in the AE-CCC sample showed a close resemblance with the COM-C sample. Additionally, the AE-CCC sample showed the highest thermal stability, as evidenced by its higher Tonset (334.64 °C), and Tmax (364.67 °C) compared to the COM-C and alkaline-treated samples. Therefore, agricultural wastes after harvesting in the Chiang Rai province of Thailand may be subjected to an alkaline process with a prior bleaching process to yield a higher cellulose content that is free of impurities. Thus, the extracted cellulose could be used as an efficient, eco-friendly, and biodegradable material for packaging applications
Mechanical and Physicochemical Properties of Composite Biopolymer Films Based on Carboxymethyl Cellulose from Young Palmyra Palm Fruit Husk and Rice Flour
Carboxymethyl cellulose from young Palmyra palm fruit husk (CMCy) film has low water barrier properties, which can limit its application. Thus, the combination of CMCy with other polysaccharides, such as rice flour (RF), may solve this problem. The aim of this study is to prepare the CMCy/RF composite films in different proportions (CMCy100, CMCy75/RF25, CMCy50/RF50, CMCy25/RF75, and RF100) and investigate their mechanical and physicochemical properties. The film strength (33.36–12.99 MPa) and flexibility (9.81–3.95%) of the CMCy/RF composite films decreased significantly (p −8 g m m−2 s−1 Pa−1) and film solubility (82.70–21.64%) of the CMCy/RF composite films. Furthermore, an increased lightness with a coincidental decreased yellowness of the CMCy/RF composite films was pronounced when the RF proportion increased (p < 0.05). However, the addition of RF in different proportions did not influence the film thickness and transparency. Based on SEM micrographs, all film samples had a relatively coarser surface. FTIR spectra showed that some interactions between CMCy and RF blended films had occurred. According to these findings, the CMCy50/RF50 composite film was found to be the best formulation because it has good mechanical and physicochemical properties
Moisture Sorption Isotherms and Prediction Models of Carboxymethyl Chitosan Films from Different Sources with Various Plasticizers
Antioxidant Films from Cassava Starch/Gelatin Biocomposite Fortified with Quercetin and TBHQ and Their Applications in Food Models
Edible and active packaging are attractive for use in food packaging applications due to their functionality and sustainability. This research developed new antioxidant active food packaging materials from cassava starch/gelatin (7:3 w/w) composite films with varied antioxidant types (quercetin and tertiary butylhydroquinone (TBHQ)) and concentrations (0–200 mg/200 mL film-forming solution) and evaluated their properties. Antioxidant addition altered the mechanical and barrier properties of the films. At 34% relative humidity (RH), increasing the concentration of quercetin increased the tensile strength and decreased the elongation at break of the composite films. Increasing quercetin and TBHQ contents increased the film water solubility and water vapor transmission rate. Intermolecular interactions between the antioxidants and films, as found in Fourier transform infrared (FT-IR) spectra and XRD micrographs, were related to the changed film functionalities. In food application studies, the cassava starch/gelatin films containing quercetin and TBHQ retarded the oxidation of lard (more than 35 days) and delayed the redness discoloration of pork. Cassava starch/gelatin composite films integrated with quercetin and TBHQ can be utilized as active packaging that delays oxidation in foods
Effect of Active Packaging Material Fortified with Clove Essential Oil on Fungal Growth and Post-Harvest Quality Changes in Table Grape during Cold Storage
Fungal growth in table grapes (Vitis vinifera cv. beauty seedless) is triggered by Botrytis cinerea, Penicillium sp., Aspergillus sp., and Rhizopus stolonifera during post-harvest storage. Due to the safety aspects, this research aimed to develop antifungal packaging embedded with essential oils (EOs) to alleviate the fungal decay of table grapes (TG). The various levels of EOs (0.5–5%, v/v) from clove, cinnamon, thyme, peppermint, lemon, bergamot, ginger, spearmint, and lemongrass were tested against Aspergillus sp. The results attained in radial growth, disk diffusion method, minimal inhibitory concentration, and minimal fungicidal concentration revealed that 1% clove essential oil (CEO) showed higher efficacy against Aspergillus sp. compared to the untreated control and other treatments. CEO at the 1% level exhibited a pleasant odor intensity in TG than the other EOs. The active polyvinyl alcohol (7% PVA) film with 1% CEO resulted in lower weight loss, disease severity, and TG berry drop than the control and other treated samples. Additionally, the acceptance score in the TG sample wrapped with a PVA film containing 1% CEO was augmented. Therefore, the PVA film with 1% CEO retarded the fungal growth and prolonged the shelf life of TG during storage of 21 days at 13 °C and 75% relative humidity (RH)
Impact of the homogenization process on the structure and antioxidant properties of chitosan-lignin composite films
9th International Conference on Water in Food Conference Date : MAY 22-24, 2016 Conference Location : Leuven, BELGIUMInternational audienceThis work investigated the impact of two homogenization treatments, High Shear (HS) and High Pressure (HP), on the structure and antioxidant activity of chitosan-lignin bio-composite films. Laser light scattering analysis revealed that smaller lignin particles were obtained after HP processing, around 0.6 μm, compared to HS treatment, between 2.5 and 5 μm. Moreover, these particles were more homogeneously distributed in the chitosan film matrix after HP process, while some aggregates remained after HS treatment, as highlighted by two-photon microscopy. The surface hydrophobicity of the composite films, as measured by water contact angle, increased after the two homogenization treatments. Finally, the antioxidant activity of the composite films was determined using the DPPH· assay. No significant difference in the radical scavenging activity was noticeable, neither after HS nor HP processing. However, a migration of lignin residues from the film to the extraction medium was noticed, particularly for HP process
- …