Energy dependence of fission product yields from 235

Under a joint collaboration between TUNL-LANL-LLNL, a set of absolute fission product yield measurements has been performed. The energy dependence of a number of cumulative fission product yields (FPY) have been measured using quasi-monoenergetic neutron beams for three actinide targets, 235U, 238U and 239Pu, between 0.5 and 14.8 MeV. The FPYs were measured by a combination of fission counting using specially designed dual-fission chambers and γ-ray counting. Each dual-fission chamber is a back-to-back ionization chamber encasing an activation target in the center with thin deposits of the same target isotope in each chamber. This method allows for the direct measurement of the total number of fissions in the activation target with no reference to the fission cross-section, thus reducing uncertainties. γ-ray counting of the activation target was performed on well-shielded HPGe detectors over a period of two months post irradiation to properly identify fission products. Reported are absolute cumulative fission product yields for incident neutron energies of 0.5, 1.37, 2.4, 3.6, 4.6, 5.5, 7.5, 8.9 and 14.8 MeV. Preliminary results from thermal irradiations at the MIT research reactor will also be presented and compared to present data and evaluations. This work was performed under the auspices of the U.S. Department of Energy by Los Alamos National Security, LLC under contract DE-AC52-06NA25396, Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344 and by Duke University and Triangle Universities Nuclear Laboratory through NNSA Stewardship Science Academic Alliance grant No. DE-FG52-09NA29465, DE-FG52-09NA29448 and Office of Nuclear Physics Grant No. DE-FG02-97ER41033

Detector for advanced neutron capture experiments at LANSCE

The Detector for Advanced Neutron Capture Experiments (DANCE) is a 159-element 4x barium fluoride array designed to study neutron capture on small quantities, 1 mg or less, of radioactive nuclides. It is being built on a 20 m neutron flight path which views the 'upper tier' water moderator at the Manuel J. Lujan Jr. Neutron Scattering Center at the Los Alamos Neutron Science Center. The detector design is based on Monte Carlo calculations which have suggested ways to minimize backgrounds due to neutron scattering events. A data acquisition system based on fast transient digitizers is bcing implemente

U(n,γ) measurements at LANSCE

Uranium-233 plays an important role in the Th-U fuel cycle, which has been proposed as an alternative to the U-Pu fuel cycle due to its reduced amount of transuranium elements. The available experimental 233U(n,γ) cross section data in the literature are scarce, [1–3]. In 2008, the 233U(n,γ) cross section was investigated at LANL using the DANCE detector combined with a PPAC, however the statistics in the keV regime were inadequate for a reliable extraction of the cross section at 100 keV. An accurate measurement of the 233U(n,γ) cross section is required by the NCSP to complete the neutron-induced cross section data; a new evaluation reported the need of 233U capture data. The challenge in this measurement lies in the difficulty of measuring capture cross section data due to the competing capture and fission channels. Fission reactions are around one order of magnitude more likely than capture for 233U. The accuracy in the capture cross section measurement relies on the discrimination between the γ-rays produced in capture and fission reactions, for which an experimental setup combining capture and fission detectors is needed. Following this requirement, a new measurement has been performed at LANSCE combining the γ-ray array DANCE with the neutron detector NEUANCE to identify fission and neutron-capture events. This measurement will provide results of the 233U capture-to-fission ratio in the Resolved and Unresolved Resonance regions

Energy dependence of fission product yields from 235U, 238U, and 239Pu with monoenergetic neutrons between thermal and 14.8 MeV

Under a joint collaboration between TUNL-LANL-LLNL, a set of absolute fission product yield measurements has been performed. The energy dependence of a number of cumulative fission product yields (FPY) have been measured using quasi-monoenergetic neutron beams for three actinide targets, 235U, 238U and 239Pu, between 0.5 and 14.8 MeV. The FPYs were measured by a combination of fission counting using specially designed dual-fission chambers and γ-ray counting. Each dual-fission chamber is a back-to-back ionization chamber encasing an activation target in the center with thin deposits of the same target isotope in each chamber. This method allows for the direct measurement of the total number of fissions in the activation target with no reference to the fission cross-section, thus reducing uncertainties. γ-ray counting of the activation target was performed on well-shielded HPGe detectors over a period of two months post irradiation to properly identify fission products. Reported are absolute cumulative fission product yields for incident neutron energies of 0.5, 1.37, 2.4, 3.6, 4.6, 5.5, 7.5, 8.9 and 14.8 MeV. Preliminary results from thermal irradiations at the MIT research reactor will also be presented and compared to present data and evaluations. This work was performed under the auspices of the U.S. Department of Energy by Los Alamos National Security, LLC under contract DE-AC52-06NA25396, Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344 and by Duke University and Triangle Universities Nuclear Laboratory through NNSA Stewardship Science Academic Alliance grant No. DE-FG52-09NA29465, DE-FG52-09NA29448 and Office of Nuclear Physics Grant No. DE-FG02-97ER41033

Energy dependence of fission product yields from

Under a joint collaboration between TUNL-LANL-LLNL, a set of absolute fission product yield measurements has been performed. The energy dependence of a number of cumulative fission product yields (FPY) have been measured using quasi-monoenergetic neutron beams for three actinide targets, 235U, 238U and 239Pu, between 0.5 and 14.8 MeV. The FPYs were measured by a combination of fission counting using specially designed dual-fission chambers and γ-ray counting. Each dual-fission chamber is a back-to-back ionization chamber encasing an activation target in the center with thin deposits of the same target isotope in each chamber. This method allows for the direct measurement of the total number of fissions in the activation target with no reference to the fission cross-section, thus reducing uncertainties. γ-ray counting of the activation target was performed on well-shielded HPGe detectors over a period of two months post irradiation to properly identify fission products. Reported are absolute cumulative fission product yields for incident neutron energies of 0.5, 1.37, 2.4, 3.6, 4.6, 5.5, 7.5, 8.9 and 14.8 MeV. Preliminary results from thermal irradiations at the MIT research reactor will also be presented and compared to present data and evaluations. This work was performed under the auspices of the U.S. Department of Energy by Los Alamos National Security, LLC under contract DE-AC52-06NA25396, Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344 and by Duke University and Triangle Universities Nuclear Laboratory through NNSA Stewardship Science Academic Alliance grant No. DE-FG52-09NA29465, DE-FG52-09NA29448 and Office of Nuclear Physics Grant No. DE-FG02-97ER41033

Toward short-lived and energy-dependent fission product yields from neutron-induced fission

Fission product yields (FPYs) are an important source of information that are used for basic and applied physics. They are essential observables to address questions relevant to nucleosynthesis in the cosmos that created the elements from iron to uranium, for example, in energy generating processes from fission recycling in binary neutron star mergers; resolving the reactor neutrino anomaly; decay heat release in nuclear reactors; and many national security applications. While new applications will require accurate energy-dependent FPY data over a broad set of incident neutron energies, the current evaluated FPY data files contain only three energy points: thermal, fast, and 14-MeV incident energies. Recent measurements using mono-energetic and pulsed neutron beams at the Triangle Universities Nuclear Laboratory (TUNL) tandem accelerator and employing a dual fission ionization chambers setup have produced self-consistent, high-precision data critical for testing fission models for the neutron-induced fission of the major actinide nuclei. This paper will present new campaign just beginning utilizing a RApid Belt-driven Irradiated Target Transfer System (RABITTS) to measure shorter-lived fission products and the time dependence of fission yields, expanding the measurements from cumulative towards independent fission yields

Toward short-lived and energy-dependent fission product yields from neutron-induced fission

Fission product yields (FPYs) are an important source of information that are used for basic and applied physics. They are essential observables to address questions relevant to nucleosynthesis in the cosmos that created the elements from iron to uranium, for example, in energy generating processes from fission recycling in binary neutron star mergers; resolving the reactor neutrino anomaly; decay heat release in nuclear reactors; and many national security applications. While new applications will require accurate energy-dependent FPY data over a broad set of incident neutron energies, the current evaluated FPY data files contain only three energy points: thermal, fast, and 14-MeV incident energies. Recent measurements using mono-energetic and pulsed neutron beams at the Triangle Universities Nuclear Laboratory (TUNL) tandem accelerator and employing a dual fission ionization chambers setup have produced self-consistent, high-precision data critical for testing fission models for the neutron-induced fission of the major actinide nuclei. This paper will present new campaign just beginning utilizing a RApid Belt-driven Irradiated Target Transfer System (RABITTS) to measure shorter-lived fission products and the time dependence of fission yields, expanding the measurements from cumulative towards independent fission yields

63Ni(n,γ) cross sections measured with DANCE

The neutron capture cross section of the s-process branch nucleus 63Ni affects the abundances of other nuclei in its region, especially 63Cu and 64Zn. In order to determine the energy-dependent neutron capture cross section in the astrophysical energy region, an experiment at the Los Alamos National Laboratory has been performed using the calorimetric 4πBaF2 array DANCE. The (n,γ) cross section of 63Ni has been determined relative to the well-known 197Au standard with uncertainties below 15%. Various 63Ni resonances have been identified based on the Q value. Furthermore, the s-process sensitivity of the new values was analyzed with the new network calculation tool NETZ