Superplastic forming and diffusion bonding of rapidly solidified, dispersion strengthened aluminum alloys for elevated temperature structural applications

Rapidly solidified alloys, based upon the Al-Fe-V-Si system and designed for elevated temperature applications, were evaluated for superplasticity and diffusion bonding behavior. Alloys with 8, 16, 27, and 36 volume percent silicide dispersoids were produced; dispersoid condition was varied by rolling at 300, 400, and 500 C (572, 752, and 932 F). Superplastic behavior was evaluated at strain rates from 1 x 10(exp -6)/s to 8.5/s at elevated temperatures. The results indicate that there was a significant increase in elongation at higher strain rates and at temperatures above 600 C (1112 F). However, the exposure of the alloys to temperatures greater than 600 C (1112 F) resulted in the coarsening of the strengthening dispersoid and the degradation of mechanical properties. Diffusion bonding was possible using low gas pressure at temperatures greater than 600 C (1112 F) which also resulted in degraded properties. The bonding of Al-Fe-V-Si alloys to 7475 aluminum alloy was performed at 516 C (960 F) without significant degradation in microstructure. Bond strengths equal to 90 percent that of the base metal shear strength were achieved. The mechanical properties and microstructural characteristics of the alloys were investigated

On the Throughput of Channels that Wear Out

This work investigates the fundamental limits of communication over a noisy discrete memoryless channel that wears out, in the sense of signal-dependent catastrophic failure. In particular, we consider a channel that starts as a memoryless binary-input channel and when the number of transmitted ones causes a sufficient amount of damage, the channel ceases to convey signals. Constant composition codes are adopted to obtain an achievability bound and the left-concave right-convex inequality is then refined to obtain a converse bound on the log-volume throughput for channels that wear out. Since infinite blocklength codes will always wear out the channel for any finite threshold of failure and therefore cannot convey information at positive rates, we analyze the performance of finite blocklength codes to determine the maximum expected transmission volume at a given level of average error probability. We show that this maximization problem has a recursive form and can be solved by dynamic programming. Numerical results demonstrate that a sequence of block codes is preferred to a single block code for streaming sources.Comment: 23 pages, 1 table, 11 figures, submitted to IEEE Transactions on Communication

Scanning tunneling microscopy of lnAs/GaSb superlattices: Subbands, interface roughness, and interface asymmetry

Scanning tunneling microscopy and spectroscopy is used to characterize InAs/GaSb superlattices, grown by molecular-beam epitaxy. Roughness at the interfaces between InAs and GaSb layers is directly observed in the images, and a quantitative spectrum of this roughness is obtained. Electron subbands in the InAs layers are resolved in spectroscopy. Asymmetry between the interfaces of InAs grown on GaSb compared with GaSb grown on In As is seen in voltage-dependent imaging. Detailed spectroscopic study of the interfaces reveals some subtle differences between the two in terms of their valence-band onsets and conduction-band state density. These differences are interpreted in a model in which the GaSb on InAs interface has an abrupt InSb-like structure, but at the InAs on GaSb interface some Sb grading occurs into the InAs overlayer

Experimental observation of negative differential resistance from an InAs/GaSb interface

We have observed negative differential resistance at room temperature from devices consisting of a single interface between n-type InAs and p-type GaSb. InAs and GaSb have a type II staggered band alignment; hence, the negative differential resistance arises from the same mechanism as in a p+-n+ tunnel diode. Room-temperature peak current densities of 8.2×10^4 A/cm^2 and 4.2×10^4 A/cm^2 were measured for structures with and without undoped spacer layers at the heterointerface, respectively

Vortex solutions in axial or chiral coupled non-relativistic spinor- Chern-Simons theory

The interaction of a spin 1/2 particle (described by the non-relativistic "Dirac" equation of L\'evy-Leblond) with Chern-Simons gauge fields is studied. It is shown, that similarly to the four dimensional spinor models, there is a consistent possibility of coupling them also by axial or chiral type currents. Static self dual vortex solutions together with a vortex-lattice are found with the new couplings.Comment: Plain TEX, 10 page

Global exponential stability of classical solutions to the hydrodynamic model for semiconductors

In this paper, the global well-posedness and stability of classical solutions to the multidimensional hydrodynamic model for semiconductors on the framework of Besov space are considered. We weaken the regularity requirement of the initial data, and improve some known results in Sobolev space. The local existence of classical solutions to the Cauchy problem is obtained by the regularized means and compactness argument. Using the high- and low- frequency decomposition method, we prove the global exponential stability of classical solutions (close to equilibrium). Furthermore, it is also shown that the vorticity decays to zero exponentially in the 2D and 3D space. The main analytic tools are the Littlewood-Paley decomposition and Bony's para-product formula.Comment: 18 page

Integrable dispersionless KdV hierarchy with sources

An integrable dispersionless KdV hierarchy with sources (dKdVHWS) is derived. Lax pair equations and bi-Hamiltonian formulation for dKdVHWS are formulated. Hodograph solution for the dispersionless KdV equation with sources (dKdVWS) is obtained via hodograph transformation. Furthermore, the dispersionless Gelfand-Dickey hierarchy with sources (dGDHWS) is presented.Comment: 15 pages, to be published in J. Phys. A: Math. Ge

A survey of cost-sensitive decision tree induction algorithms

The past decade has seen a significant interest on the problem of inducing decision trees that take account of costs of misclassification and costs of acquiring the features used for decision making. This survey identifies over 50 algorithms including approaches that are direct adaptations of accuracy based methods, use genetic algorithms, use anytime methods and utilize boosting and bagging. The survey brings together these different studies and novel approaches to cost-sensitive decision tree learning, provides a useful taxonomy, a historical timeline of how the field has developed and should provide a useful reference point for future research in this field