Voltage-based droop control of converter-interfaced distributed generation units in microgrids

Sinds de laatste jaren is er in het elektrisch energienet een enorme toevloed aan kleine decentrale generatoren, vaak op basis van hernieuwbare energiebronnen. De distributienetten werden echter niet gebouwd om injectie van energie toe te laten. Hierdoor komen steeds meer problemen in de distributienetten voor, zoals bijvoorbeeld overspanningen tijdens zonnige periodes. Dit bemoeilijkt de verdere integratie van hernieuwbare energiebronnen. In deze context werd het microgrid concept voorgesteld om een gecoordineerde koppeling van decentrale generatoren in het net mogelijk te maken. Microgrids zijn kleine subnetten die lokaal hun elementen, zoals de generatoren en de lasten regelen om bepaalde doeleinden te bereiken. Ze kunnen bijvoorbeeld de spanningsregeling in hun net verzorgen of als een geheel meespelen in de energiemarkten. Een karakteristiek van microgrids is dat ze onafhankelijk van het net kunnen werken, in het zogenaamde eilandbedrijf. In eilandbedrijf moeten het verbruik en de opwekking op ieder tijdstip op elkaar afgesteld zijn. Aangezien microgrids erg verschillende eigenschappen hebben van het gewone elektrisch net, zijn hier specifieke regelstrategieen voor vereist. In deze doctoraatsverhandeling wordt een dergelijke regelstrategie uitgewerkt, de zogenaamde spanningsgebaseerde droop (proportionele) regeling. Het spanningsniveau wordt als de niet-conventionele parameter gebruikt om het microgrid te regelen

Overview of increasing the penetration of renewable energy sources in the distribution grid by developing control strategies and using ancillary services

Increasing the renewables energy resources in the distribution network is one of the main challenges of the distributed system operator due to instability, power quality and feeder capacity problems. This paper proposes a solution for further penetration of distributed energy resources, by developing control strategies and using ancillary services. Besides the penetration issues, the control strategies will mitigate power quality problems, voltage unbalance and will increase the immunity of the grid by provision of fault ride through capabilities

Development of a smart transformer to control the power exchange of a microgrid

A smart transformer enables to control the power exchange between a microgrid and the utility network by controlling the voltage at the microgrid side within certain limits. The distributed generation units in the microgrid are equipped with a voltage-based droop control strategy. This controller reacts on the voltage change, making the smart transformer an element that controls power exchange without the need for communication to other elements in the microgrid. To build a smart transformer, several concepts are possible. In a smart transformer with continuous turns ratio, hereafter referred to as continuous smart transformer, the transformer's microgrid-side voltage can be controlled without voltage steps and the accuracy of the voltage control can be very high. The voltage control of a smart transformer with discrete turns ratio, hereafter referred to as discrete smart transformer, is less accurate, as the output voltage is regulated between several discrete values. In this paper, the development of a continuous and discrete smart transformer will be elaborated. Their validity will be proven by implementing these smart transformers in an experimental test setup. Also, some concepts to improve the control accuracy will be proposed

Voltage-based droop control of renewables to avoid on-off oscillations caused by overvoltages

To achieve the environmental goals set by many governments, an increasing amount of renewable energy, often delivered by distributed-generation (DG) units, is injected into the electrical power system. Despite the many advantages of DG, this can lead to voltage problems, especially in times of a high local generation and a low local load. The traditional solution is to invest in more and stronger lines, which could lead to massive investments to cope with the huge rise of DG connection. Another common solution is to include hard curtailment; thus, ON-OFF control of DG units. However, hard curtailment potentially leads to ON-OFF oscillations of DG and a high loss of the available renewable energy as storage is often not economically viable. To cope with these issues, applying a grid-forming control in grid-connected DG units is studied in this paper. The voltage-based droop control that was originally developed for power sharing in islanded microgrids, enables an effective way for soft curtailment without communication. The power changes of the renewable energy sources are delayed to more extreme voltages compared to those of the dispatchable units. This restricts the renewable energy loss and avoids ON-OFF oscillations

Transition from Islanded to grid-connected mode of microgrids with voltage-based droop control

Microgrids are able to provide a coordinated integration of the increasing share of distributed generation (DG) units in the network. The primary control of the DG units is generally performed by droop-based control algorithms that avoid communication. The voltage-based droop (VBD) control is developed for islanded low-voltage microgrids with a high share of renewable energy sources. With VBD control, both dispatchable and less-dispatchable units will contribute in the power sharing and balancing. The priority for power changes is automatically set dependent on the terminal voltages. In this way, the renewables change their output power in more extreme voltage conditions compared to the dispatchable units, hence, only when necessary for the reliability of the network. This facilitates the integration of renewable units and improves the reliability of the network. This paper focusses on modifying the VBD control strategy to enable a smooth transition between the islanded and the grid-connected mode of the microgrid. The VBD control can operate in both modes. Therefore, for islanding, no specific measures are required. To reconnect the microgrid to the utility network, the modified VBD control synchronizes the voltage of a specified DG unit with the utility voltage. It is shown that this synchronization procedure significantly limits the switching transient and enables a smooth mode transfer

Positive balancing service by solar virtual power plants

During the past years, a large amount of photovoltaic (PV) capacity has been installed in Belgium. The main driver for this was the abundant government support (GreenPower Certicates). However, during the last few years, the support for new installations has been withdrawn and new PV capacity ceased. In previous research, it has been proven that selling PV energy of existing plants directly on the wholesale market is not feasible due to the large share of green power certicates awarded to these plants. However, the price of green power certicates has dropped signicantly and hence the balance between certicate and commodity revenue is restored. This paper investigates the possibility of providing positive balancing services to the transmission system operator by aggregating solar power in a technical Virtual Power Plant. The paper concludes that it seems not interesting, neither economically nor energetically, to keep solar plants solely for positive balancing purposes. Combination of solar power with other sources or consumers can however be profitable, as solar power is quickly switched in case it is needed to react fast

Power quality improvements through power electronic interfaced distributed generation

In low-voltage distribution networks a large amount of single-phase nonlinear loads are connected. This leads to the combined presence of power system unbalance and harmonic distortion. The research presented in this paper focusses on these steady-state power quality problems. It uses a harmonic load flow program, implemented in symmetrical components, to investigate the influence of several single-phase inverter control strategies used to connect any kind of primary energy source to the grid. The influence of these single-phase distributed generation units in the three-phase four-wire distribution network is discussed by means of two recently formulated indicators that combine the power system unbalance and the existing harmonics