169 research outputs found
An interactive grid generation procedure for axial and radial flow turbomachinery
A combination algebraic/elliptic technique is presented for the generation of three dimensional grids about turbo-machinery blade rows for both axial and radial flow machinery. The technique is built around use of an advanced engineering workstation to construct several two dimensional grids interactively on predetermined blade-to-blade surfaces. A three dimensional grid is generated by interpolating these surface grids onto an axisymmetric grid. On each blade-to-blade surface, a grid is created using algebraic techniques near the blade to control orthogonality within the boundary layer region and elliptic techniques in the mid-passage to achieve smoothness. The interactive definition of bezier curves as internal boundaries is the key to simple construction. This procedure lends itself well to zonal grid construction, an important example being the tip clearance region. Calculations done to date include a space shuttle main engine turbopump blade, a radial inflow turbine blade, and the first stator of the United Technologies Research Center large scale rotating rig. A finite Navier-Stokes solver was used in each case
An analysis of the viscous flow through a compact radial turbine by the average passage approach
A steady, three-dimensional viscous average passage computer code is used to analyze the flow through a compact radial turbine rotor. The code models the flow as spatially periodic from blade passage to blade passage. Results from the code using varying computational models are compared with each other and with experimental data. These results include blade surface velocities and pressures, exit vorticity and entropy contour plots, shroud pressures, and spanwise exit total temperature, total pressure, and swirl distributions. The three computational models used are inviscid, viscous with no blade clearance, and viscous with blade clearance. It is found that modeling viscous effects improves correlation with experimental data, while modeling hub and tip clearances further improves some comparisons. Experimental results such as a local maximum of exit swirl, reduced exit total pressures at the walls, and exit total temperature magnitudes are explained by interpretation of the flow physics and computed secondary flows. Trends in the computed blade loading diagrams are similarly explained
Progress of High Efficiency Centrifugal Compressor Simulations Using TURBO
Three-dimensional, time-accurate, and phase-lagged computational fluid dynamics (CFD) simulations of the High Efficiency Centrifugal Compressor (HECC) stage were generated using the TURBO solver. Changes to the TURBO Parallel Version 4 source code were made in order to properly model the no-slip boundary condition along the spinning hub region for centrifugal impellers. A startup procedure was developed to generate a converged flow field in TURBO. This procedure initialized computations on a coarsened mesh generated by the Turbomachinery Gridding System (TGS) and relied on a method of systematically increasing wheel speed and backpressure. Baseline design-speed TURBO results generally overpredicted total pressure ratio, adiabatic efficiency, and the choking flow rate of the HECC stage as compared with the design-intent CFD results of Code Leo. Including diffuser fillet geometry in the TURBO computation resulted in a 0.6 percent reduction in the choking flow rate and led to a better match with design-intent CFD. Diffuser fillets reduced annulus cross-sectional area but also reduced corner separation, and thus blockage, in the diffuser passage. It was found that the TURBO computations are somewhat insensitive to inlet total pressure changing from the TURBO default inlet pressure of 14.7 pounds per square inch (101.35 kilopascals) down to 11.0 pounds per square inch (75.83 kilopascals), the inlet pressure of the component test. Off-design tip clearance was modeled in TURBO in two computations: one in which the blade tip geometry was trimmed by 12 mils (0.3048 millimeters), and another in which the hub flow path was moved to reflect a 12-mil axial shift in the impeller hub, creating a step at the hub. The one-dimensional results of these two computations indicate non-negligible differences between the two modeling approaches
Recommended from our members
Targeting Mitochondrial ROS Production in Kidney Transplantation
Ischaemia reperfusion injury (IRI) is an inevitable consequence of transplant practices
but is associated with reduced levels of graft function and survival. In addition, concerns
regarding the severity of IRI has restricted the greater use of organs from the available
donor pool. Critically, no pharmacological therapies currently exist to ameliorate the effects
of IRI in organ transplantation (or other IRI-related pathologies), partly due to an incomplete
understanding of the underlying pathophysiology. Recently, a specific mechanism of
mitochondrial reactive oxygen species (ROS) production, thought to initiate many of the
downstream pathways resulting in IRI, has been described. This mechanism has identified a
number of new therapeutic targets within mitochondria, including the respiratory complex
succinate dehydrogenase (SDH). The aim of this thesis was to determine whether malonate
ester prodrugs, which competitively inhibit SDH, may reduce mitochondrial ROS production
and ameliorate IRI in models of kidney transplantation. Herein, I show that the metabolic
changes required for mitochondrial ROS production on reperfusion, including succinate
accumulation and the depletion of adenine nucleotides, occur in grafts retrieved from both
DBD and DCD donors, despite differences in their exposure to warm ischaemia. This may
partly relate to difficulties in efficiently cooling organs and suggests grafts from both donor
types may benefit from therapies aimed at reducing mitochondrial ROS production. I describe
a translational model of kidney transplantation in the pig and human as well as a model
of renal IRI in the mouse. I show the mitochondrial ROS probe, MitoB, may be limited
in its ability to accurately quantify the burst of mitochondrial ROS production that occurs
during IRI in the kidney; however mitochondrial ROS production may instead be inferred
indirectly in mouse, pig and human models by comparing the metabolic changes that occur
on reperfusion to those previously described to drive mitochondrial ROS production in vitro.
In addition, I identify key markers of oxidative damage, cell death and kidney function in
the mouse, pig and human and subsequently show malonate ester prodrugs administered at
reperfusion (but not prior to ischaemia) may reduce IRI in the mouse. Finally, I present pilot
data in the pig providing important dosing and timing information for the use of malonate
ester prodrugs in this model. Further work is needed to determine whether malonate ester
prodrugs may inhibit mitochondrial ROS production in kidney transplantation; however, this
thesis has provided important inroads into the use of these compounds in a transplant setting
as well as characterising a number of translational models that may pave the way to their use
in future clinical trials
Environmental legacy of pre-Columbian Maya mercury
The Mexico and Central American region has a history of mercury use that began at least two millennia before European colonisation in the 16th century. Archaeologists have reported extensive deposits of cinnabar (HgS) and other mercury materials in ancient human settlements across the region. However, there has been no consideration to date of the environmental legacy of this long history of anthropogenic mercury use. This review begins by synthesising our knowledge of the history and nature of anthropogenic mercury in ancient Mesoamerica based on archaeological data, with a particular focus on the Maya culture of lowland Guatemala, Belize, the Yucatan of Mexico, El Salvador, and Honduras. The Classic Period Maya used mercury for decorative and ceremonial (including funerary) purposes: Cinnabar (HgS) predominantly, but the archaeological record also shows rare finds of elemental mercury (Hg0) in important burial and religious contexts. In this review, we have located and summarised all published data sets collected from (or near) ancient Maya settlements that include environmental mercury measurements. Comparing mercury determinations from pre-Columbian Maya settlements located across the region confirms that seven sites from ten have reported at least one location with mercury concentrations that equal or exceed modern benchmarks for environmental toxicity. The locations with elevated mercury are typically former Maya occupation areas used in the Late Classic Period, situated within large urban settlements abandoned by c. 10th century CE. It is most likely that the mercury detected in buried contexts at Maya archaeological sites is associated with pre-Columbian mercury use, especially of cinnabar. In more complex contexts, where modern biological or specifically anthropogenic inputs are more probable, legacy mercury in the environment will have a more complex, and time transgressive input history. This review identifies current research gaps in our understanding of the long history of Maya mercury use and in the collection of robust total mercury datasets from the Maya world. We identify important areas for future research on the environmental persistence and legacy of mercury, including the need to interpret environment mercury data in the context of mercury exposure and human health at Maya archaeological sites
Computational Study of the CC3 Impeller and Vaneless Diffuser Experiment
Centrifugal compressors are compatible with the low exit corrected flows found in the high pressure compressor of turboshaft engines and may play an increasing role in turbofan engines as engine overall pressure ratios increase. Centrifugal compressor stages are difficult to model accurately with RANS CFD solvers. A computational study of the CC3 centrifugal impeller in its vaneless diffuser configuration was undertaken as part of an effort to understand potential causes of RANS CFD mis-prediction in these types of geometries. Three steady, periodic cases of the impeller and diffuser were modeled using the TURBO Parallel Version 4 code: (1) a k- turbulence model computation on a 6.8 million point grid using wall functions, (2) a k- turbulence model computation on a 14 million point grid integrating to the wall, and (3) a k- turbulence model computation on the 14 million point grid integrating to the wall. It was found that all three cases compared favorably to data from inlet to impeller trailing edge, but the k- and k- computations had disparate results beyond the trailing edge and into the vaneless diffuser. A large region of reversed flow was observed in the k- computations which extended from 70 to 100 percent span at the exit rating plane, whereas the k- computation had reversed flow from 95 to 100 percent span. Compared to experimental data at near-peak-efficiency, the reversed flow region in the k- case resulted in an underprediction in adiabatic efficiency of 8.3 points, whereas the k- case was 1.2 points lower in efficiency
Ancient Maya wetland fields revealed under tropical forest canopy from laser scanning and multiproxy evidence
Understanding agricultural subsistence is vital for understanding past complex societies. Lidar data are indicating widespread ancient Maya infrastructure. Wetland agriculture was crucial to ancient cultures, but no previous study coupled lidar with multiproxy evidence to demonstrate the extent and uses of Maya wetland fields. We conducted a lidar survey around wetlands that multiple use proxies established were ancient Maya polycultural systems. Lidar indicated the Birds of Paradise (BOP) wetland field complex was five times larger than we had previously mapped and identified an even larger wetland agroecosystem. We ground-verified the BOP fields through excavations and dating, creating a study to couple these multiproxy data with lidar, thereby demonstrating widespread ancient Maya wetland agroecosystems.We report on a large area of ancient Maya wetland field systems in Belize, Central America, based on airborne lidar survey coupled with multiple proxies and radiocarbon dates that reveal ancient field uses and chronology. The lidar survey indicated four main areas of wetland complexes, including the Birds of Paradise wetland field complex that is five times larger than earlier remote and ground survey had indicated, and revealed a previously unknown wetland field complex that is even larger. The field systems date mainly to the Maya Late and Terminal Classic (∼1,400–1,000 y ago), but with evidence from as early as the Late Preclassic (∼1,800 y ago) and as late as the Early Postclassic (∼900 y ago). Previous study showed that these were polycultural systems that grew typical ancient Maya crops including maize, arrowroot, squash, avocado, and other fruits and harvested fauna. The wetland fields were active at a time of population expansion, landscape alteration, and droughts and could have been adaptations to all of these major shifts in Maya civilization. These wetland-farming systems add to the evidence for early and extensive human impacts on the global tropics. Broader evidence suggests a wide distribution of wetland agroecosystems across the Maya Lowlands and Americas, and we hypothesize the increase of atmospheric carbon dioxide and methane from burning, preparing, and maintaining these field systems contributed to the Early Anthropocene.Office of the VP for Researc
Computational Assessment of a 3-Stage Axial Compressor Which Provides Airflow to the NASA 11- by 11-Foot Transonic Wind Tunnel, Including Design Changes for Increased Performance
A 24 foot diameter 3-stage axial compressor powered by variable-speed induction motors provides the airflow in the closed-return 11- by 11-Foot Transonic Wind Tunnel (11-Foot TWT) Facility at NASA Ames Research Center at Moffett Field, California. The facility is part of the Unitary Plan Wind Tunnel, which was completed in 1955. Since then, upgrades made to the 11-Foot TWT such as flow conditioning devices and instrumentation have increased blockage and pressure loss in the tunnel, somewhat reducing the peak Mach number capability of the test section. Due to erosion effects on the existing aluminum alloy rotor blades, fabrication of new steel rotor blades is planned. This presents an opportunity to increase the Mach number capability of the tunnel by redesigning the compressor for increased pressure ratio. Challenging design constraints exist for any proposed design, demanding the use of the existing driveline, rotor disks, stator vanes, and hub and casing flow paths, so as to minimize cost and installation time. The current effort was undertaken to characterize the performance of the existing compressor design using available design tools and computational fluid dynamics (CFD) codes and subsequently recommend a new compressor design to achieve higher pressure ratio, which directly correlates with increased test section Mach number. The constant cross-sectional area of the compressor leads to highly diffusion factors, which presents a challenge in simulating the existing design. The CFD code APNASA was used to simulate the aerodynamic performance of the existing compressor. The simulations were compared to performance predictions from the HT0300 turbomachinery design and analysis code, and to compressor performance data taken during a 1997 facility test. It was found that the CFD simulations were sensitive to endwall leakages associated with stator buttons, and to a lesser degree, under-stator-platform flow recirculation at the hub. When stator button leakages were modeled, pumping capability increased by over 20 of pressure rise at design point due to a large reduction in aerodynamic blockage at the hub. Incorporating the stator button leakages was crucial to matching test data. Under-stator-platform flow recirculation was thought to be large due to a lack of seals. The effect of this recirculation was assessed with APNASA simulations recirculating 0.5, 1, and 2 of inlet flow about stators 1 and 2, modeled as axisymmetric mass flux boundary conditions on the hub before and after the vanes. The injection of flow ahead of the stators tended to re-energize the boundary layer and reduce hub separations, resulting in about 3 increased stall margin per 1 of inlet flow recirculated. In order to assess the value of the flow recirculation, a mixing plane simulation of the compressor which gridded the under-stator cavities was generated using the ADPAC CFD code. This simulation indicated that about 0.65 of the inlet flow is recirculated around each shrouded stator. This collective information was applied during the redesign of the compressor. A potential design was identified using HT0300 which improved overall pressure ratio by removing pre-swirl into rotor 1, replacing existing NASA 65 series rotors with double circular arc sections, and re-staggering rotors and the existing stators. The performance of the new design predicted by APNASA and HT0300 is compared to the existing design
- …