Co-infusion of haplo-identical CD19-chimeric antigen receptor T cells and stem cells achieved full donor engraftment in refractory acute lymphoblastic leukemia

Abstract Background Elderly patients with relapsed and refractory acute lymphoblastic leukemia (ALL) have poor prognosis. Autologous CD19 chimeric antigen receptor-modified T (CAR-T) cells have potentials to cure patients with B cell ALL; however, safety and efficacy of allogeneic CD19 CAR-T cells are still undetermined. Case presentation We treated a 71-year-old female with relapsed and refractory ALL who received co-infusion of haplo-identical donor-derived CD19-directed CAR-T cells and mobilized peripheral blood stem cells (PBSC) following induction chemotherapy. Undetectable minimal residual disease by flow cytometry was achieved, and full donor cell engraftment was established. The transient release of cytokines and mild fever were detected. Significantly elevated serum lactate dehydrogenase, alanine transaminase, bilirubin and glutamic-oxalacetic transaminase were observed from days 14 to 18, all of which were reversible after immunosuppressive therapy. Conclusions Our preliminary results suggest that co-infusion of haplo-identical donor-derived CAR-T cells and mobilized PBSCs may induce full donor engraftment in relapsed and refractory ALL including elderly patients, but complications related to donor cell infusions should still be cautioned. Trial registration Allogeneic CART-19 for Elderly Relapsed/Refractory CD19+ ALL. NCT0279955

ZnCuInS/ZnSe/ZnS Quantum Dot-Based Downconversion Light-Emitting Diodes and Their Thermal Effect

The quantum dot-based light-emitting diodes (QD-LEDs) were fabricated using blue GaN chips and red-, yellow-, and green-emitting ZnCuInS/ZnSe/ZnS QDs. The power efficiencies were measured as 14.0 lm/W for red, 47.1 lm/W for yellow, and 62.4 lm/W for green LEDs at 2.6 V. The temperature effect of ZnCuInS/ZnSe/ZnS QDs on these LEDs was investigated using CIE chromaticity coordinates, spectral wavelength, full width at half maximum (FWHM), and power efficiency (PE). The thermal quenching induced by the increased surface temperature of the device was confirmed to be one of the important factors to decrease power efficiencies while the CIE chromaticity coordinates changed little due to the low emission temperature coefficients of 0.022, 0.050, and 0.068 nm/°C for red-, yellow-, and green-emitting ZnCuInS/ZnSe/ZnS QDs. These indicate that ZnCuInS/ZnSe/ZnS QDs are more suitable for downconversion LEDs compared to CdSe QDs

A pH-Sensing Film from Tamarind Seed Polysaccharide with Litmus Lichen Extract as an Indicator

A new pH-sensing film was developed by using tamarind seed polysaccharide (TSP) and natural dye extracted from litmus lichen (LLE). The addition of LLE from 0 to 2.5% decreased the tensile strength and elongation at break from 30.20 to 29.97 MPa and 69.73% to 60.13%, respectively, but increased the water vapor permeability from 0.399 × 10−9 to 0.434 × 10−9 g·s−1·m−1·Pa−1. The UV–Vis spectra of the litmus lichen extract (LLE) in the pH range of 4–10 showed that the color clearly changed from orange to blue. The characterization results showed that TSP interacted with LLE through hydrogen bonds. The color of the film varied from orange (pH 4.0) to blue-violet (pH 10.0). The full cream milk spoilage test indicated that the film is suitable for application in full cream milk spoilage detection. The developed pH-sensing film could be used as a promising diagnostic tool for the detection of food spoilage

Preparation, Characterization and Application of a Low Water-Sensitive Artemisia sphaerocephala Krasch. Gum Intelligent Film Incorporated with Anionic Cellulose Nanofiber as a Reinforcing Component

A low-water-sensitive Artemisia sphaerocephala Krasch. gum (ASKG) based intelligent film was developed. Red cabbage extracts (RCE) was selected as a natural pH-sensitive indicator, and anionic cellulose nanofiber (ACNF) was added as a hydrophobic and locking host. The zeta potential, rheology, Fourier-transform infrared spectroscopy, X-ray diffractometry, and release results indicated that the RCE was locked by the ACNF via electrostatic interactions, moreover, broke the original complicated network and ordered arrangement of polymer molecules in the developed intelligent films. RCE addition decreased the tensile strength, oxygen, and water vapor barrier properties and light transmission of the developed intelligent films, while increasing the elongation at break. The films could respond to buffer solutions and NH3 through different color changes. The developed intelligent film was hydrophobic, which could precisely detect the freshwater shrimp freshness in real time via color changes, which indicated that the films have potential in intelligent packaging and gas-sensing label fields

Thermal Treatment of Poplar Hemicelluloses at 180 to 220 °C under Nitrogen Atmosphere

Hemicelluloses were separated from poplar wood and exposed to thermal treatment. Changes in chemical content were investigated from 180 °C to 220 °C in a nitrogen atmosphere. Fourier transform infrared spectroscopy, X-ray diffraction, and differential thermal gravimetric analysis were used to characterize the hemicellulose before and after the thermal treatment. The effects of temperature on hygroscopicity and color were measured. The results showed that hemicelluloses were sensitive to temperature. β-glucosidic bonds and side chains in hemicelluloses were cleaved around 180 °C, and the increased temperature promoted the breaking process. Esterification reactions happened during the treatment. When the treatment temperature reached 220 °C, all side chains broke down, and partial carbonization occurred. Therefore, the color became darker, and the hydrophobicity increased. This study could help to explain the changes in wood that occur during thermal treatment

A Green Film-Forming Investigation of the Edible Film Based on Funoran: Preparation, Characterization, and the Investigation of the Plasticizer Effects

In this study, an edible film based on funoran was developed. Moreover, the effects of plasticizers (glycerol, xylitol, and sorbitol) on the physicochemical properties of the funoran films were also investigated. The interactions between plasticizers and funoran molecules of the film-forming system were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. The results showed that the addition of plasticizers altered and broke the initial complex entangled structures of funoran molecular chains. Funoran films containing plasticizers were compatible, homogeneous, and dense, exhibiting good thermal stability below 100 °C. With the addition of plasticizers, the elongation at break, oxygen permeability, light transmittance, and water vapor permeability increased, but the tensile strength decreased. It was found that a glycerol addition of 40% was most suitable for commercial applications. All the results revealed the excellent film-forming properties of funoran, indicating that the prepared funoran films have tremendous potential for packaging applications

Study on CO

CO2 emission control is of great urgency, and the decrease of heavy-duty diesel engines’ CO2 emission is one of the significant methods to reduce CO2 emission. This paper uses a full-flow constantvolume dilution sampling system to experiment on the China VI heavy-duty diesel engine in order to measure CO2 emissions under WHTC and WHSC cycles and different loads, with studying the instantaneous emissions characteristics of CO2, post-processing effects on CO2 emissions, influence factors of CO2 emissions. The study found that the CO2 emissions before the post-treatment of the WHSC cycle are 37% higher than that of the WHTC cycle, while emissions of CO2 are 3.45% higher than that before post-treatment. Simultaneously, cold start increases the CO2 emissions of the heavy-duty diesel engines by more than 1%. Post-treatment still increases the CO2 emissions of heavy-duty diesel engines by 3.5%. In addition, CO2 emissions have different trends with power at different speeds. CO2 emissions get an incremental within 600rpm and 900rpm, which gradually becomes slower until it reaches the peak, as engine power increases; the CO2 emissions initially increase, followed by a decrease, and then continue to increase within 1000rpm and 1400rpm; the CO2 emissions are almost not affected by the speed within 1500rpm and 1900rpm