33 research outputs found
Forget metamaterial: It does not improve sound absorption performance as it claims
The term `sub-wavelength' is commonly used to describe innovative
sound-absorbing structures usually labeled as `metamaterials'. Such structures,
however, inherently do not bring groundbreaking advancements. This study
addresses the limitations imposed by the thickness criterion of Yang et al. by
introducing the concept of equivalent mass-spring-damping parameters within the
resonator framework. This innovative approach introduces an index of
`half-absorption bandwidth' to effectively overcome the thickness restriction.
Four practical cases are then presented to correct prevalent misleading
conceptions about low-frequency, broadband absorption as claimed. The
phenomenon of mass disappearing in the expression of sound absorption
coefficient supports the conclusion that volume is the only determinant factor
in sound absorption performance. Any attempts to improve sound absorption
solely through geometry and structural designs would inevitably sacrifice the
half-absorption bandwidth. Additionally, the concept of negative stiffness or
bulk modulus is merely a mathematical convention without any real improvement
in absorption performance. Overall, this research focuses on the physical
mechanism of sound-absorbing structures by correcting traditional
misunderstandings, and offers a comprehensive framework for assessing and
enhancing sound absorption.Comment: 12 pages, 5 figures, part of the first author's Ph.D. thesi
Anthracene Diphosphate Ligands for CdSe Quantum Dots; Molecular Design for Efficient Upconversion
Quantum dot (QD)-sensitized photon upconversion follows a multi-step energy transfer process from the QD to transmitter ligand to a soluble annihilator. Using a novel 10-R-anthracene-1,8-diphosphoric acid (R = octyl, 2-hexyldecyl, phenyl) ligand with high binding affinity for CdSe QD surfaces, we demonstrate a photon upconversion process that is limited by the transmitter to annihilator transfer efficiency. Using 1H NMR spectroscopy, we demonstrate that these bidentate diphosphate ligands rapidly and irreversibly displace two carboxylate ligands. These ligands mediate energy transfer from the photoexcited QDs to a triplet annihilator (1,10-diphenylanthracene), producing overall photon upconversion quantum efficiencies as high as 17%, the highest for QDs with no shells. Transient absorption spectroscopy shows that the anthracene dihydrogen phosphate (ADP) ligand supports a 3.4 fold longer triplet state lifetime compared to 9-anthracene carboxylic acid (299.9 ± 9.5 vs 88.2 ± 2.1 Όs), increasing the probability of energy transfer
Agglomeration of particles by a converging ultrasound field and their quantitative assessments
The acoustic radiation force resulting from acoustic waves have been extensively studied for the contact-free generation of organized patterning arrays. The precise arrangement of microscopic objects clustered at the pressure nodes is critical to the development of functional structures and patterned surfaces. However, the size of the clusters is restricted by the saturation limit of the acoustic nodes. Here, we present a bulk acoustic wave (BAW) platform, which employs a two-dimensional acoustic wave to propel particles of various sizes. Experimentally, when particles are large, significant acoustic energy is scattered and partly absorbed by the matched layers in front of the sensors. The acoustic radiation force from a convergent acoustic pressure field agglomerates the large polystyrene (PS) particles towards the central region instead of the pressure nodes. The parametric analysis has been performed to assess the transition in the particles from clustering at the organized nodal arrays to agglomerating in the central region, which is a function of particle size, particle concentration, and load voltage. Statistically, the particles can agglomerate with a cluster ratio greater than 70%, and this ratio can be improved by increasing the load power/voltage supplied to the transducers. With its ability to perform biocompatible, label-free, and contact-free self-assembly, this concept offers a new possibility in the fabrication of colloidal layers, the recreation of tissue microstructure, the development of organoid spheroid cultures, the migration of microorganisms, and the assembly of bioprinting materials
Analysis of Aerosol Types and Vertical Distribution in Seven Typical Cities in East Asia
Identifying the types and vertical distribution of aerosols plays a significant role in evaluating the influence of aerosols on the climate system. Based on the aerosol optical properties obtained from Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO), this study analyzed the long-term aerosol characteristics of seven cities in East Asia (Ulaanbaatar, Beijing, Lanzhou, Shanghai, Lhasa, Hong Kong, and Bangkok) from 2007 to 2021, including the spatiotemporal variations of aerosol optical depth (AOD), the vertical stratification characteristics of aerosols, and the main aerosol subtype. The results showed that, except for Lhasa, the AOD values of all cities exhibited a trend of initially increasing and then decreasing over the years. Except for Shanghai, the high values of AOD in the other cities occurred in the spring and summer seasons, while the low values occurred in the autumn and winter seasons. In all four seasons, the AOD contribution within the 1â3 km range accounted for more than 50% of the total. In the autumn and winter seasons, this proportion reached over 80%. The main types of aerosols and their contributions varied at different altitudes. Overall, dust, polluted continental/smoke, polluted dust, and elevated smoke dominated in all aerosol layers across each city. On the other hand, clean marine, clean continental, and dusty marine had very small proportions, accounting for less than 5% of all the citiesâ aerosol layers
Spatial-Temporal Variation of AOD Based on MAIAC AOD in East Asia from 2011 to 2020
In recent years, atmospheric aerosol pollution has seriously affected the ecological environment and human health. Understanding the spatial and temporal variation of AOD is essential to revealing the impact of aerosols on the environment. Based on the MAIAC AOD 1 km product from 2011 to 2020, we analyzed AODâs distribution patterns and trends in different time series across East Asia. The results showed that: (1) The annual average AOD in East Asia varied between 0.203 and 0.246, with a decrease of 14.029%. The areas with high AOD values were mainly located in the North China Plain area, the Sichuan Basin area, and the Ganges Delta area, with 0.497, 0.514, and 0.527, respectively. Low AOD values were mainly found in the Tibetan Plateau and in mountainous areas north of 40° N, with 0.061 in the Tibetan Plateau area. (2) The distribution of AOD showed a logarithmic decreasing trend with increasing altitude. Meanwhile, the lower the altitude, the faster the rate of AOD changes with altitude. (3) The AOD of East Asia showed different variations in characteristics in different seasons. The maximum, minimum, and mean values of AOD in spring and summer were much higher than those in autumn and winter. The monthly average AOD reached a maximum of 0.326 in March and a minimum of 0.190 in November. The AOD showed a continuous downward trend from March to September. The highest quarterly AOD values in the North China Plain occurred in summer, while the highest quarterly AOD values in the Sichuan Basin, the Ganges Delta, and the Tibetan Plateau all occurred in spring, similar to the overall seasonal variation in East Asia
Validation and Analysis of MAIAC AOD Aerosol Products in East Asia from 2011 to 2020
East Asia is one of the most important sources of aerosols in the world. The distribution of aerosols varies across time and space. Accurate aerosol data is crucial to identify its spatiotemporal dynamics; thus, it is of great significance to obtain and verify new aerosol data for this region. Based on the Aerosol Optical Depth (AOD) data of the Aerosol Robotic Network (AERONET) program for 17 stations from 2011 to 2020, this study comprehensively verified the accuracy and applicability of the Multi-Angle Implementation of Atmospheric Correction (MAIAC) AOD 1 km products among different seasons, elevations, and climate zones over entire East Asia. The results showed that: (1) The overall accuracy of MAIAC AOD was high in East Asia, and the accuracy of Terra was slightly better than that of Aqua. MAIAC AOD showed significant heterogeneity among sites. MAIAC AOD performed well in areas with high vegetation cover and flat terrain, while the inversion accuracy was relatively low in areas with low vegetation cover and high terrain. (2) In general, MAIAC AOD and AERONET AOD showed good agreement in different seasons, presenting as winter > spring > autumn > summer. Yet the accuracy and consistency of Terra AOD product were better than Aqua product. (3) MAIAC AOD showed different accuracy at different elevations and climate zones. It had a high correlation and best inversion accuracy with AERONET AOD at low and medium elevations. MAIAC AOD had better inversion accuracy in the arid and warm temperate zones than that in the equatorial and cold temperate zones. (4) AOD distribution and its trend showed significant spatial differences in East Asia. The high AOD values were dominant in the Sichuan basin and the eastern plains of China, as well as in India and Bangladesh, while the relatively low AOD values were distributed in southwestern China and the areas north of 40°N. AOD in most parts of East Asia showed a negative trend, indicating a great improvement in air quality in these regions
Research on Navigation and Positioning Technology of Intelligent Accompanying Tool Car in Dispatching Automation Computer Room
In view of the wide variety of equipment in the dispatch automation machine room and the dense arrangement of cabinets, a navigation technology suitable for the dispatch automation machine room is proposed on the intelligent companion tool cart. In this paper, three sensors of ultrasonic, infrared and lidar are designed to form an intelligent neural sensor, and the information received by the intelligent neural sensor is calculated to generate a vector map through a software algorithm. At the same time, a plane coordinate network is established. The grid coordinate unit accuracy is 0.1cm. At the same time, the concept of âvirtual fenceâ was put forward to fix the workers at the working point, which increased the safety of work. Subsequently, an experimental test of positioning and navigation of the tool cart was carried out. The experimental results showed that the tool cart can accurately locate and generate a vector map with an accuracy error of less than 10cm. The navigation method has a good application effect and has a good promotion value