Hodge Dual for Soldered Bundles

In order to account for all possible contractions allowed by the presence of the solder form, a generalized Hodge dual is defined for the case of soldered bundles. Although for curvature the generalized dual coincides with the usual one, for torsion it gives a completely new dual definition. Starting from the standard form of a gauge lagrangian for the translation group, the generalized Hodge dual yields precisely the lagrangian of the teleparallel equivalent of general relativity, and consequently also the Einstein-Hilbert lagrangian of general relativity.Comment: 8 pages, no figures. Accepted for publication in Journal of Physics

Consistent Gravitationally-Coupled Spin-2 Field Theory

Inspired by the translational gauge structure of teleparallel gravity, the theory for a fundamental massless spin-2 field is constructed. Accordingly, instead of being represented by a symmetric second-rank tensor, the fundamental spin-2 field is assumed to be represented by a spacetime (world) vector field assuming values in the Lie algebra of the translation group. The flat-space theory naturally emerges in the Fierz formalism and is found to be equivalent to the usual metric-based theory. However, the gravitationally coupled theory, with gravitation itself described by teleparallel gravity, is shown not to present the consistency problems of the spin-2 theory constructed on the basis of general relativity.Comment: 16 pages, no figures. V2: Presentation changes, including addition of a new sub-section, aiming at clarifying the text; version accepted for publication in Class. Quantum Grav

Wearable biopotential measurement using the TI ADS1198 analog front-end and textile electrodes : signal conditioning and signal quality assessment

The development of mobile systems for monitoring bioelectric signals outside a hospital environment involves many challenges that do not arise when it is in a controlled environment, like a hospital. The dimensions of these systems are an important factor to consider in order to facilitate their use without interfering with the daily activities of individuals. The purpose of this work is the implementation of a single-supply battery-powered, low power ECG/EMG signal monitoring system based on the ADS1198 Analog Front-End from Texas Instruments. The system was designed to acquire ECG signals from three electrodes using the integrated Right-Leg-Drive (RLD) circuit from the ADS1198. The developed analog front-end was connected for testing purposes through the SPI interface to a NI-USB 8451 board and signals were acquired using LabVIEW. The circuit was tested in several situations and proved to provide high quality signals using textile integrated electrodes and conventional disposable gel electrodes.FEDER- “Programa Operacional Factores de Competitividade – COMPETE”, FCT - Fundação para a Ciência e a Tecnologia, projects PEst-C/CTM/UI0264/2011 and PTDC/EEA-ELC/70803/2006, and Instituto de Telecomunicaçõe

Continuous health monitoring using e-textile integrated biosensors

In this work, continuous health monitoring for disabled or elderly people is proposed using textile integrated electrodes for ECG measurement. Other applications, such as EMG or skin impedance measurement are also envisaged. The paper specifically describes a shirt integrating electrodes for ECG measurement that has been tested in several conditions. The techniques for integration of ECG electrodes can be directly applied for production of EMG or skin-impedance electrodes.Signal processing techniques for heart rate value extraction and to deal with low-quality signal or motion artefacts are being tested and will also be described. Results show that signals acquired with the shirt are comparable to signals acquired with conventional gel electrodes. The complete integration of the electrodes into clothing may have a very interesting psychological benefit, but some issues related to comfort and daily use have to be further investigated.Fundação para a Ciência e a Tecnologia (FCT

Asymptotic integral kernel for ensembles of random normal matrices with radial potentials

We use the steepest descents method to study the integral kernel of a family of normal random matrix ensembles with eigenvalue distribution P_{N}(z_{1},...,z_{N}) = Z_{N}^{-1} e^{-NSigma_{i=1}^{N}V_{alpha}(z_{i})} Pi_{1leqi<jleqN}|z_{i}-z_{j}|^{2} where V_{alpha}(z)=|z|^{alpha}, z in C and alpha in ]0,infty[. Asymptotic analysis with error estimates are obtained. A corollary of this expansion is a scaling limit for the n-point function in terms of the integral kernel for the classical Segal--Bargmann space

Mechanical joining methods for additive manufactured assembly tools

The use of additive manufacturing (AM) processes is growing in the manufacturing industry. One application with great potential for using these processes is the manufacture of assembly tools for a high-ly competitive markets, such as the automotive industry. A critical aspect of the assembly tool design is its capability to incorporate modifications even at a late stage of its development in very short time. In many cases, these modifications are achieved using metal inserts in the polymeric tool, which allow to add new geometric features. This capability increases the usefulness and versatility of components produced by AM and compensate for potential shortcomings of using additive mate-rials. The purpose of this paper is to evaluate the potential use of accessories in additive manufactured com-ponents. In addition, the effect of different percentages of infill tool material on the joining quality of accesso-ries is evaluated. This is done by performing a screw pull-out test on a ABS ESD-7 part, produced by fused deposition modelling. The following different joining solutions were compared and studied in this work: em-bedded inserts, glue, heating processes, pressure (Tap-in) and creation of threads, such as, printing the thread directly and machining the thread onto the material.Programa Operacional Competitividade e Internacionalização - COMPETE 2020, Projeto nº 002814, Ref. POCI-01-0247-FEDER-002814 entre a Univ. do Minho e a Bosc

Presentation and validation of a new optical sensing concept based in a 3d-printing solution

In high competitive markets, such as the automotive industry, the better quality of products, reduction of manufacturing costs and the fulfilment of all delivery deadlines can only be achieved through continuous improvement of production capabilities. One current strategy is to develop and create smarter and adaptive assembly tools. Automation is a relevant area of development in the current industrial world and the baseline of the fourth industrial revolution (Industry 4.0). Namely, it is very important to use sensing components on jigs for assembly parts in the production line. The arrangement of sensing components on the assembly tools is very dependent of the product, making the project more complex and less flexible. This issue can penalise the productivity heavily, especially if a wide range of products and changeover operations are usual. The use of Additive Manufacturing (AM) is growing in the industry and offers a high potential for research and development in the present stage. The AM is advantageous in many areas, especially in the rapid construction of complex tools (RP). This paper presents a new optical sensing concept based on the 3D printing of internal circuits in the assembly tools. This solution can bring many advantages and increase tools flexibility.Programa Operacional de Competividade e Internacionalização - COMPETE 2020, Projeto nº 002814; Ref. POCI-01-0247-FEDER-002814, entre a Univ. Minho e a Bosc

Assessment of heart rate in infants from 6 to 36 months old during aquatic activities

Some authors (e.g. Maclaren and Coulson, 1999; Dekerle, 2006) reported that aerobic training has a positive effect on critical velocity in swimming. However, it raises the question whereas this effect is similar among swimmers of different performance level. Therefore, the purpose of this study was to determine the training responses in aerobic parameters (critical velocity and critical stroke rate) in young swimmers of different level during an in-season period of training

Diabetic and Elder Patients Experience Superior Cardiovascular Benefits After Gastric Bypass Induced Weight Loss

Background/Objetives: Obesity and obesity related co-morbidities are well-recognized risks for cardiovascular (CV) disease and mortality. Weight loss improves CV risk factors and the efficacy of bariatric surgery in decreasing CV mortality is now well-established. Our aim was to assess CV risk progression and occurrence of CV events in a cohort of patients that underwent Roux-en-Y gastric bypass (RYGB) for obesity treatment in a single academic public center.Subjects and Methods: Ten year CV risk was estimated using the Framingham Equation at baseline and 2 years after RYGB surgery in our patients cohort (n = 260). In the subgroup with a follow-up time longer than 4 years after surgery (n = 185; mean 5.4 ± 0.1 years), CV risk adjusted for the time length after RYGB was similarly estimated and the occurrence of CV events for outcome adjudication was monitored during the same time period by reviewing the hospital patients' record, the electronic national health system patient register and our center outpatient clinic records.Results: Ten year CV risk was significantly reduced 2 years after surgery when compared to baseline, with reductions of 1.65 ± 0.25% in the risk of CV disease. Patients with prior type 2 diabetes and aged 50 years or older experienced a significantly superior CV risk reduction, with diabetic patients experiencing a reduction of their 10–year CV disease risk of 3.58 ± 1.11% vs. a reduction of 1.31 ± 0.20% in non-diabetic patients and with the 10–year risk of CV disease dropping 3.41 ± 0.75% in patients older than 50 vs. a reduction of 0.99 ± 0.18 in patients up to 50 years. For the subgroup of patients with a longer follow-up time, baseline CV risk estimation predicted the occurrence of 6.08 ± 0.56 cardiovascular disease (CVD) events, 3.87 ± 0.39 coronary heart disease (CHD) events, 1.49 ± 0.22 myocardial infarctions (MI), 0.71 ± 0.09 strokes, 0. 28 ± 0.05 deaths from CHD and 0.35 ± 0.05 deaths from CVD. No CV events were adjudicated in this subgroup during follow-up.Conclusions: RYGB significantly improves CV risk and prevents the occurrence of CV events. For similar weight loss, diabetic and elder patients experience a superior CV risk improvement and may have additional CV benefits after bariatric surgery