Correction: Mechanical properties of femoral trabecular bone in dogs

<p>Abstract</p> <p>After the publication of this work <abbrgrp><abbr bid="B1">1</abbr></abbrgrp>, we became aware of the fact that the frequency of the ultrasound transmitter that we used for determining the elastic moduli of the trabecular bone specimens was not correctly specified. The oscillation frequency of the ultrasound transmitter was 2 MHz (and not 100 MHz as stated in our work) while we used a sampling rate of 100 MHz. In our publication, the oscillation frequency and sampling rate were confounded. Therefore also the statement in the discussion that we might have determined elastic moduli of trabecular bone tissue rather than the elastic properties of whole specimens because we used an ultrasound frequency > 2 MHz is wrong and has to be omitted.</p> <p>For measurement, the cubic bone specimens were not immersed in Ringer's solution but only were kept moist all the time.</p> <p>Apart from these corrections concerning the methods and interpretation of the data, the results reported in our publication and the conclusions are absolutely correct.</p> <p>We apologize for the inconvenience that this inaccuracy may have caused.</p

Reconstruction of the acetabulum in THA using femoral head autografts in developmental dysplasia of the hip

<p>Abstract</p> <p>Background</p> <p>Severe acetabular deficiencies in cases of developmental dysplasia of the hip (DDH) often require complex reconstructive procedures in total hip arthroplasty (THA). The use of autologous femoral head grafts for acetabular reconstruction has been described, but few data is available about clinical results, the rates of non-union or aseptic loosening of acetabular components.</p> <p>Methods</p> <p>In a retrospective approach, 101 patients with 118 THA requiring autologous femoral head grafts to the acetabulum because of DDH were included. Six patients had died, another 6 were lost to follow-up, and 104 hips were available for clinical and radiological evaluation at a mean of 68 ± 15 (13 to 159) months.</p> <p>Results</p> <p>The average Merle d'Aubigné hip score improved from 9 to 16 points. Seven implants had to be revised due to aseptic loosening (6.7%). The revisions were performed 90 ± 34 (56 to 159) months after implantation. The other hips showed a stable position of the sockets without any signs of bony non-union, severe radiolucencies at the implant-graft interface or significant resorption of the graft.</p> <p>Conclusion</p> <p>The use of autologous femoral head grafts with cementless cups in primary THA can achieve promising short- to midterm results in patients with dysplastic hips.</p

FE-Simulation zur Lokalisierung hoch beanspruchter Bereiche in der Hüftpfanne von Endoprothesen

The implantation of a total hip prosthesis is an operation which is performed frequently due to advanced hip jointdamage both in humans and in veterinary medicine in dogs. The long-term result of a hip prosthesis is mainly determined by aseptic loosening of the prosthesis; among other causes, abrasion particles of the tribological pairing are responsible for the loosening. For the analysis of the surface stresses with different tribological pairings, a finite element model was generated which was based on the CAD data of a commercial total hip prosthesis. After transmission of a physiological force in the components of the three tribological pairings ceramic/polyethylene, ceramic/ceramic and metal/polyethylene, stresses were calculated. Stresses in the ceramic/ceramic tribological pairings were conspicuously higher than in the other material pairings. In the future adapted prostheses have to be developed that ensure optimal friction and absorption characteristics of the components.Die Implantation einer Hüfttotalendoprothese ist ein operativer Eingriff, der in Deutschland häufig aufgrund eines fortgeschrittenen Hüftgelenkschadens sowohl beim Menschen als auch in der Veterinärmedizin beim Hund durchgeführt wird. Das Langzeitergebnis einer Hüfttotalendoprothese wird hauptsächlich durch die aseptische Lockerung der Prothese bestimmt; Abriebpartikel der Gleitpaarung sind für eine Lockerung mit verantwortlich. Zur Analyse der Oberflächenspannungen bei unterschiedlichen Gleitpaarungen wurde ein Finite-Element-Modell generiert, das auf den CAD-Daten einer handelsüblichen Hüfttotalendoprothese basiert. Nach Einleitung einer physiologischen Gelenkkraft wurden Spannungen in den Komponenten der drei Gleitpaarungen Keramik/Polyethylen, Keramik/Keramik und Metall/Polyethylen berechnet. Dabei zeigten sich bei der Gleitpaarung Keramik/Keramik deutlich höhere Spitzenspannungen als bei den beiden übrigen Gleitpaarungen. In weiteren Arbeiten sollen angepasste Prothesen entwickelt werden, die optimale Reib- und Dämpfungseigenschaften der Komponenten sicherstellen

The effect of functional splinting on mild dysplastic hips after walking onset

BACKGROUND: For treatment of Graf class IIb dysplastic hips at walking onset a treatment concept with abduction splints allowing patterns as walking and crawling under constant abduction control was investigated. However, as the splint still incapacitates child movements the research question remains whether the physiologically progressing maturation of hips can be significantly altered using such abduction splints for walking children. METHODS: Of 106 children showing late hip dysplasia, 68 children treated with the Hoffman-Daimler (HD-splint) abduction splint were compared with 38 children with neglect of the abduction treatment in this retrospective study. Radiographic analyses were performed measuring the development of the age dependent acetabular angle. RESULTS: The regression analysis for splint treatment showed a significant linear regression for both splint treatment and no splint treatment group (r(2 )= 0,31 respectively r(2 )= 0,33). No statistical difference between both treatment groups was apparent. CONCLUSION: Considering the characteristics of this study, there seems to be no strong rationale supporting the use of an abduction device in growing children. As no significant difference between treatment groups is apparent, a future controlled prospective study on splinting effects can be considered ethically allowed

Mechanical properties of femoral trabecular bone in dogs

BACKGROUND: Studying mechanical properties of canine trabecular bone is important for a better understanding of fracture mechanics or bone disorders and is also needed for numerical simulation of canine femora. No detailed data about elastic moduli and degrees of anisotropy of canine femoral trabecular bone has been published so far, hence the purpose of this study was to measure the elastic modulus of trabecular bone in canine femoral heads by ultrasound testing and to assess whether assuming isotropy of the cancellous bone in femoral heads in dogs is a valid simplification. METHODS: From 8 euthanized dogs, both femora were obtained and cubic specimens were cut from the centre of the femoral head which were oriented along the main pressure and tension trajectories. The specimens were tested using a 100 MHz ultrasound transducer in all three orthogonal directions. The directional elastic moduli of trabecular bone tissue and degrees of anisotropy were calculated. RESULTS: The elastic modulus along principal bone trajectories was found to be 11.2 GPa ± 0.4, 10.5 ± 2.1 GPa and 10.5 ± 1.8 GPa, respectively. The mean density of the specimens was 1.40 ± 0.09 g/cm(3). The degrees of anisotropy revealed a significant inverse relationship with specimen densities. No significant differences were found between the elastic moduli in x, y and z directions, suggesting an effective isotropy of trabecular bone tissue in canine femoral heads. DISCUSSION: This study presents detailed data about elastic moduli of trabecular bone tissue obtained from canine femoral heads. Limitations of the study are the relatively small number of animals investigated and the measurement of whole specimen densities instead of trabecular bone densities which might lead to an underestimation of Young's moduli. Publications on elastic moduli of trabecular bone tissue present results that are similar to our data. CONCLUSION: This study provides data about directional elastic moduli and degrees of anisotropy of canine femoral head trabecular bone and might be useful for biomechanical modeling of proximal canine femora