Combination of GPS and VLBI on the observation level during CONT11—common parameters, ties and inter-technique biases

Multi-technique space geodetic analysis software has been developed which allows to combine data on the observation level. In addition to local tie information, site-wise common parameters, i.e., troposphere and clocks, can be estimated with this software. Thus, it will be discussed how common parameters have to be estimated and where biases/offsets need to be taken into account. To test such a novel concept, Global Positioning System (GPS) and Very Long Baseline Interferometry (VLBI) data from the CONT11 campaign are being utilized. Since the VLBI baselines of this campaign extend over several thousands of kilometers, GPS data are processed in precise-point positioning mode and satellite orbits and clocks are kept fixed to the IGS final products. From the obtained results, it can be shown that the combination of space geodetic data on the observation level leads to a consistent improvement of station position repeatability as well as nuisance parameters like troposphere estimates. Furthermore, estimation of common parameters (troposphere or clocks) at co-located sites helps to improve the solution further and derive an utmost physically consistent model of the concerned parameters

Ground-based GNSS-R solutions by means of software defined radio

Usually ground-based GNSS-R installations are either existing geodetic GNSS stations or they are built with dedicated components that enable the deduction and monitoring of physical and geometrical properties of the reflecting area around that particular site. In both cases, hardware components usually enable real-time operation of such instruments. However, as software-defined radio (SDR) technology has advanced in the recent years it is now possible to carry out signal processing in real-time, which makes it an ideal candidate for the realization of a flexible GNSS-R system. It is shown how SDR can help to realize GNSS-R solutions for sea-level monitoring at the Onsala Space Observatory, Sweden. Moreover, such SDR solutions can be mounted on an unmanned aerial vehicle (UAV) in order to collect data from higher altitudes and even provide Delay-Doppler information for extended GNSS-R studies

Software-Defined Radio Direct Correlation GNSS Reflectometry by Means of GLONASS

Ground-based GNSS reflectometry (GNSS-R) systems can be realized by different means. The concept of correlation between direct and reflected GNSS signals is basically possible with all GNSS systems. However, using signals from the Russian GLONASS system simplifies the signal processing so that software-defined radio (SDR) components can be used at replace expensive hardware solutions. This paper discusses how such a solution, called GLONASS-R, can be realized using entirely off-the-shelf components. Field tests with such a system demonstrate the capability to monitor sea surface heights with a precision of 3 cm or better even with a sampling rate of 1.5 Hz. The flexibility of a SDR and the simple concept of GLONASS-R allow build such a system with low costs and adapt it to the needs of any ground-based GNSS-R problem

Inverse modelling of GNSS multipath for sea level measurements - initial results

We present a new method to retrieve sea level from GNSS SNR data that relies upon inverse modelling of the detrended SNR. This method can simultaneously use data from both GPS and GLONASS, and both L1 and L2 frequencies, to improve the solution with respect to prior studies. Results from the GNSS-R installation at Onsala Space Observatory are presented and the retrieved sea level heights are compared with a co-located pressure mareograph. The method is found to give an RMS error of 1.8 cm. The results are also compared against previous implementations of GNSS tide gauges and found to have lower RMS than both the earlier SNR algorithm and also the dual receiver, phase delay method

Improving GNSS-R sea level determination through inverse modeling of SNR data

This paper presents a new method for retrieving sea surface heights from Global Navigation Satellite Systems reflectometry (GNSS-R) data by inverse modeling of SNR observations from a single geodetic receiver. The method relies on a B-spline representation of the temporal sea level variations in order to account for its continuity. The corresponding B-spline coefficients are determined through a nonlinear least squares fit to the SNR data, and a consistent choice of model parameters enables the combination of multiple GNSS in a single inversion process. This leads to a clear increase in precision of the sea level retrievals which can be attributed to a better spatial and temporal sampling of the reflecting surface. Tests with data from two different coastal GNSS sites and comparison with colocated tide gauges show a significant increase in precision when compared to previously used methods, reaching standard deviations of 1.4 cm at Onsala, Sweden, and 3.1 cm at Spring Bay, Tasmania

Analysis Center at National Institute of Information and Communications Technology

This report summarizes the activities of the Analysis Center at National Institute of Information and Communications Technology (NICT) for the year 2012

Ultra-rapid earth rotation determination with VLBI during CONT11 and CONT14

We present earth rotation results from the ultra-rapid operations during the continuous VLBI campaigns CONT11 and CONT14. The baseline Onsala--Tsukuba, i.e., using two out of the 13 and 17 stations contributing to CONT11 and CONT14, respectively, was used to derive UT1-UTC in ultra-rapid mode during the ongoing campaigns. The latency between a new observation and a new UT1-UTC result was less than 10 min for more than 95{\%} of the observations. The accuracy of the derived ultra-rapid UT1-UTC results is approximately a factor of three worse than results from optimized one-baseline sessions and/or complete analysis of large VLBI networks. This is, however, due to that the one-baseline picked from the CONT campaigns is not optimized for earth rotation determination. Our results prove that the 24/7 operation mode planned for VGOS, the next-generation VLBI system, is possible already today. However, further improvements in data connectivity of stations and correlators as well in the automated analysis are necessary to realize the ambitious VGOS plans

On the Analysis of VLBI Observations to GNSS Satellites

Space geodetic techniques such as Very Long Baseline Interferometry (VLBI) and Global Navigation Satellite Systems (GNSS) are used for the determination of celestial and terrestrial reference frames and Earth orientation parameters. It is of utmost importance to combine the observations from the different techniques to fully exploit the strengths and unique characteristics of the techniques, however, inaccurate local ties are problematic for a rigorous combination. To improve the link between the techniques, tests are under way to observe GNSS signals with VLBI radio telescopes directly, and to observe GNSS signals in GNSS antennas with subsequent processing in the VLBI system (“GNSS-VLBI Hybrid System”) including VLBI correlation. In both cases, the GNSS data type is the difference between the ranges from two stations to a satellite. However, it is still difficult to acquire those observations and thus we apply post-processed range measurements from a precise point positioning (PPP) solution with the C5++ software to build those single differences which are then used in the Vienna VLBI Software (VieVS). We use the CONT11 data set with identical clocks at seven sites to validate the models in VieVS and to assess the impact of the combined solution on the geodetic products

Voltage sensitive phosphatases: emerging kinship to protein tyrosine phosphatases from structure-function research

The transmembrane protein Ci-VSP from the ascidian Ciona intestinalis was described as first member of a fascinating family of enzymes, the voltage sensitive phosphatases (VSPs). Ci-VSP and its voltage-activated homologs from other species are stimulated by positive membrane potentials and dephosphorylate the head groups of negatively charged phosphoinositide phosphates (PIPs). In doing so, VSPs act as control centers at the cytosolic membrane surface, because they intervene in signaling cascades that are mediated by PIP lipids. The characteristic motif CX5RT/S in the active site classifies VSPs as members of the huge family of cysteine-based protein tyrosine phosphatases (PTPs). Although PTPs have already been well-characterized regarding both, structure and function, their relationship to VSPs has drawn only limited attention so far. Therefore, the intention of this review is to give a short overview about the extensive knowledge about PTPs in relation to the facts known about VSPs. Here, we concentrate on the structural features of the catalytic domain which are similar between both classes of phosphatases and their consequences for the enzymatic function. By discussing results obtained from crystal structures, molecular dynamics simulations, and mutagenesis studies, a possible mechanism for the catalytic cycle of VSPs is presented based on that one proposed for PTPs. In this way, we want to link the knowledge about the catalytic activity of VSPs and PTPs.DFG, 53182490, EXC 314: Unifying Concepts in CatalysisDFG, 390540038, EXC 2008: UniSysCa

Atmospheric Delay Reduction Using KARAT for GPS Analysis and Implications for VLBI

We have been developing a state-of-the-art tool to estimate the atmospheric path delays by raytracing through mesoscale analysis (MANAL) data, which is operationally used for numerical weather prediction by the Japan Meteorological Agency (JMA). The tools, which we have named KAshima RAytracing Tools (KARAT)', are capable of calculating total slant delays and ray-bending angles considering real atmospheric phenomena. The KARAT can estimate atmospheric slant delays by an analytical 2-D ray-propagation model by Thayer and a 3-D Eikonal solver. We compared PPP solutions using KARAT with that using the Global Mapping Function (GMF) and Vienna Mapping Function 1 (VMF1) for GPS sites of the GEONET (GPS Earth Observation Network System) operated by Geographical Survey Institute (GSI). In our comparison 57 stations of GEONET during the year of 2008 were processed. The KARAT solutions are slightly better than the solutions using VMF1 and GMF with linear gradient model for horizontal and height positions. Our results imply that KARAT is a useful tool for an efficient reduction of atmospheric path delays in radio-based space geodetic techniques such as GNSS and VLBI