Effect of various dopant elements on primary graphite growth

Five spheroidal graphite cast irons were investigated, a usual ferritic grade and four pearlitic alloys containing Cu and doped with Sb, Sn and Ti. These alloys were remelted in a graphite crucible, leading to volatilization of the magnesium added for spheroidization and to carbon saturation of the liquid. The alloys were then cooled down and maintained at a temperature above the eutectic temperature. During this step, primary graphite could develop showing various features depending on the doping elements added. The largest effects were that of Ti which greatly reduces graphite nucleation and growth, and that of Sb which leads to rounded agglomerates instead of lamellar graphite. The samples have been investigated with secondary ion mass spectrometry to enlighten distribution of elements in primary graphite. SIMS analysis showed almost even distribution of elements, including Mg and Al (from the inoculant) in the ferritic grade, while uneven distribution was evident in all doped alloys. Investigations are going on to clarify if the uneven distribution is associated with structural defects in the graphite precipitates

Enhanced Support for High Intensity Users of the Criminal Justice System – an evaluation of mental health nurse input into Integrated Offender Management Services in the North East of England

The current UK Government’s focus on the development of services to manage and support offenders with mental health problems has resulted in a number of innovative project developments. This research examines a service development in the North East of England which co-located Mental Health nurses with two Integrated Offender Management teams. While not solving all problems, the benefits of co-location were clear – although such innovations are now at risk from government changes which will make Integrated Offender Management the responsibility of new providers without compelling them to co-operate with health services

Microstructural Characterization of Graphite Spheroids in Ductile Iron

The present work brings new insights by transmission electron microscopy allowing disregarding or supporting some of the models proposed for spheroidal growth of graphite in cast irons. Nodules consist of sectors made of graphite plates elongated along a hai direction and stack on each other with their c axis aligned with the radial direction. These plates are the elementary units for spheroidal growth and a calculation supports the idea that new units continuously nucleate at the ledge between sectors

Effect of Ce and Sb on Primary Graphite Growth in Cast Irons

It is well-known that if certain trace elements are present in cast iron melts the morphology of the graphite precipitates can be altered. In order to understand the effect of doping elements on primary growth of graphite, pure Fe–Sb alloys were prepared by induction melting. They were then placed in graphite crucibles and heated to a temperature above the Fe–C eutectic so that the charge became saturated in carbon and melted. To obtain Fe–Ce alloys, metallic Ce was added at the bottom of a graphite crucible and covered with iron, and then heated as for the Fe–Sb charge. In both cases, the melt was then cooled and held slightly above the eutectic temperature so that primary graphite crystals, which had nucleated on the crucible walls and then detached from it, could grow freely in the melt. The influence of the added elements on graphite growth was revealed by the change in the shape and distribution of the crystals compared to those obtained in similar experiments carried out with pure Fe. The experiments were made in air and vacuum so as to point out possible interactions between the elements present in the melt and oxygen

An electron microscopy study of graphite growth in nodular cast irons

Growth of graphite during solidification and high-temperature solid-state transformation has been investigated in samples cut out from a thin-wall casting which solidified partly in the stable (iron–graphite) and partly in the metastable (iron–cementite) systems. Transmission electron microscopy has been used to characterize graphite nodules in as-cast state and in samples having been fully graphitized at various temperatures in the austenite field. Nodules in the as-cast material show a twofold structure characterized by an inner zone where graphite is disoriented and an outer zone where it is well crystallized. In heat-treated samples, graphite nodules consist of well-crystallized sectors radiating from the nucleus. These observations suggest that the disoriented zone appears because of mechanical deformation when the liquid contracts during its solidification in the metastable system. During heat-treatment, the graphite in this zone recrystallizes. In turn, it can be concluded that nodular graphite growth mechanism is the same during solidification and solid-state transformatio

A Two Conversions/Sample Differential Slope Multiple Sampling ADC With Accelerated Counter Architecture

MicroelectronicsElectrical Engineering, Mathematics and Computer Scienc