Searching for the 1912 Maymyo earthquake:new evidence from paleoseismic investigations along the Kyaukkyan Fault, Myanmar

The Great Burma earthquake (MsGR 8.0; Ms 7.6–7.7) occurred on May 23rd, 1912, and was one of the most remarkable early 1900's seismic events in Asia as described by Gutenberg and Richter (1954). The earthquake, focused near Maymyo, struck the Northern Shan State in eastern Myanmar. Contemporary evaluation of damage distribution and oral accounts led to a correlation between the earthquake and the topographically prominent Kyaukkyan Fault near the western margin of the Shan Plateau, although direct evidence has never been reported. This study aims to find evidence of paleoseismic activity, and to better understand the relationship between the 1912 earthquake and the Kyaukkyan Fault. Paleoseismic trenching along the Kyaukkyan Fault revealed evidence of several surface rupturing events. The northernmost trench exposes at least two visible rupture events since 4660 ± 30 BP: an older rupture stratigraphically constrained by AMS 14C dating to between 4660 ± 30 BP and 1270 ± 30 BP, and a younger rupture formed after 1270 ± 30 BP. The presence of pottery, bricks and cookingrelated charcoal in the younger faulted stratigraphy demonstrates Kyaukkyan Fault activity within human times, and a possible correlation between the younger rupture and the 1912 Maymyo earthquake is not excluded. The southern paleoseismic trench, within a broad transtensional basin far from bounding faults, exposes two (undated) surface ruptures. Further study is required to correlate those ruptures to the events dated in the north. These preliminary paleoseismological results constitute the first quantitative evidence of paleoseismic activity along the northern ~160 km of the Kyaukkyan Fault, and support existing evidence that the Kyaukkyan Fault is an active but slow-slipping structure with a long interseismic period.Published75-862T. Deformazione crostale attivaJCR Journa

The Necessity of Close Contact Tracing in Combating COVID-19 Infection – A Systemic Study

Many contact tracing solutions developed by countries around the globe in containing the Covid-19 pandemic are in the area of location-based tracing, which does not enable them to identify close contacts accurately. As location-based tracing implementations continuous on, the results have not been as effective as intended. Thus, in providing some closure, this study will dissect the need for close contact tracing solutions for the pandemic by providing a comprehensive contact tracing characteristic framework (CCTCF) for Covid-19, which will help authorities toward better pandemic management. In this study, CCTCF for Covid-19 was constructed by applying several methods. Using Problem, Intervention, Comparison, Outcome (PICO) as the framework, methods conducted were: (1) Case study to analyze the contact tracing systems in 30 countries; (2) Systematic literature review (n=2056) regarding solutions’ elements, (3) Thematic analysis for characteristics framework development. A total of 25 items were obtained for CCTCF, along with valuable insights that necessitate close contact tracing for the pandemic. Results from CCTCF have also shown that the best contact tracing solution for Covid-19 is bi-directional human-to-human close contact tracing, which uses a retrospective approach and is able to identify the source as well as groups of infection using a personal area network (PAN). Doi: 10.28991/esj-2022-SPER-019 Full Text: PD

Comparisons on the nutritive values of local and introduced forages and feed mixture for ruminant feed in central dry zone of Myanmar

This study aimed to compare nutritive values of local (Sorghum) and introduced (Mombasa) forages and their feed mixtures for ruminant feed in central dry zone of Myanmar. Sorghum based feed mixtures (FeedMix-1, 2 and 3) were the commonly used feed mixtures for cattle in dry zone of Myanmar and other feed mixtures (FeedMix-4, 5 and 6) were based on Mombasa. The lower CP and higher fibre contents (P<0.05) were observed in sorghum and its feed mixtures. The highest gas volumes (P<0.05) were observed in the FeedMix-4 and 6, and then the lowest gas volume (P<0.05) was observed in FeedMix-3. The gas production from quickly soluble fraction (a) of sorghum was significantly higher (P<0.05) than that of Mombasa, inversely the gas production from insoluble fraction (b) of sorghum was significantly lower (P<0.05) than that of Mombasa. Moreover, potential gas production (a+b), ME, OMD and SCFA of sorghum were also significantly lower (P<0.05) than those of Mombasa. The value of “a” was lowest (P<0.05) in FeedMix-1, whereas the highest value was found in FeedMix-6. The lowest values (P<0.05) of “b”, “a+b”, ME, OMD and SCFA were observed in FeedMix-3 and the highest values (P<0.05) of those parameters were found in FeedMix-4. Thus, the higher nutritive values observed in the introduced forage, Mombasa and its feed mixtures were indicating that Mombasa should be used instead of sorghum for the feed of cattle in dry zone of Myanmar.&nbsp

Evaluation on dry forage yields and nutritional characteristics of introduced herbaceous legumes in Myanmar

The study was carried out to evaluate the forage yields, nutritive values and in vitro fermentation parameters of herbaceous legumes. Five varieties of introduced herbaceous legumes; Stylosanthes guianensis cv. Ubon stylo, Macrotyloma axillare cv. Archer, Centrosema brasilianum cv. Ooloo, Stylosanthes guianensis cv. Stylo 184 and Macroptilum bracteatum cv. Cadarga were evaluated at the research farm, University of Veterinary Science, Yezin, Myanmar. No fertilizer and no irrigation were applied for cultivation to test drought resistance. Dry forage yield, nutritive values and gas production at four harvesting times were measured with 4×5 factorial arrangement (5 legumes and 4 harvesting time) in randomized complete block design. There was no interaction between legumes and harvesting time on forage yield, nutritive values and fermentation parameters but they were affected by the main effects of legume types and harvesting time. Among the legume forages, the highest dry forage yields were found in Ooloo, Ubon stylo, and Stylo 184, and followed by the DM yield of Archer and Cadarga. The DM yield of the second harvest was significantly higher (p<0.05) than those of the first, third and fourth harvest which were not significantly different from each other. As a chemical composition, the DM content of Archer was lower (p<0.05) than those of other varieties. Among the legumes forages, the lower CP content was found in Cadarga. The higher NDF was observed in Ooloo. Ooloo, Ubon stylo and Cadarga showed higher ADF in comparison with the other two varieties. Among the harvesting time, the lowest DM content was found at the first harvest. The highest CP content was found at third harvest. The NDF content was not significantly different. The lowest ADF content was found in fourth harvest. According to the dry forage yield, Ubon stylo and Ooloo had the highest dry forage yield and in term of nutritive values, Stylo 184 and Archer had higher nutritive values. As the main effect of forages, Stylo 184 and Archer had higher gas production in comparison with the other varieties. As the main effect of harvesting time, the fourth harvest had the highest gas production in comparison with other harvesting time. It could be better for cultivation by application of fertilizer and irrigation to get more forage yield and quality. &nbsp

Confirmation of Skywalker Hoolock Gibbon (Hoolock tianxing) in Myanmar extends known geographic range of an endangered primate

Characterizing genetically distinct populations of primates is important for protecting biodiversity and effectively allocating conservation resources. Skywalker gibbons (Hoolock tianxing) were first described in 2017, with the only confirmed population consisting of 150 individuals in Mt. Gaoligong, Yunnan Province, China. Based on river geography, the distribution of the skywalker gibbon has been hypothesized to extend into Myanmar between the N’Mai Kha and Ayeyarwaddy Rivers to the west, and the Salween River (named the Thanlwin River in Myanmar and Nujiang River in China) to the east. We conducted acoustic point-count sampling surveys, collected noninvasive samples for molecular mitochondrial cytochrome b gene identification, and took photographs for morphological identification at six sites in Kachin State and three sites in Shan State to determine the presence of skywalker gibbons in predicted suitable forest areas in Myanmar. We also conducted 50 semistructured interviews with members of communities surrounding gibbon range forests to understand potential threats. In Kachin State, we audio-recorded 23 gibbon groups with group densities ranging between 0.57 and 3.6 group/km2. In Shan State, we audio-recorded 21 gibbon groups with group densities ranging between 0.134 and 1.0 group/km2. Based on genetic data obtained from skin and saliva samples, the gibbons were identified as skywalker gibbons (99.54–100% identity). Although these findings increase the species’ known population size and confirmed distribution, skywalker gibbons in Myanmar are threatened by local habitat loss, degradation, and fragmentation. Most of the skywalker gibbon population in Myanmar exists outside protected areas. Therefore, the IUCN Red List status of the skywalker gibbon should remain as Endangered

Critical path analysis programming method without network diagram

Project scheduling is an important task in project management which monitors the project duration, resource utilization and affects the benefit of project for all kinds of project such as construction, IT, renewable energy, product design and manufacturing etc. Among many methods for project management, critical path method (CPM) is one of the better-known planning and control techniques in project scheduling. In this study, CPM-based computerized program was developed together with modeling of step by step calculations of parameters of interest such as earliest starts and finishes, slack and float times of project activities resulting in determination of critical path for the project. One advantage of computer implementation of CPM using MATLAB in this study is that unlike conventional method, it eliminates necessity to conventionally draw network diagram to perform critical path analysis

Real Time Fire Detection System with Image Processing

Fire detection by image processing is a growing research in this era. With many methods used to detect fire out there, an accurate method to detect fire without false alarms has not been produced much. This is due to the fact that many methods used RGB colour mode for detection. In this paper, the main focus was on detecting the fire effectively using thermal video from a thermal camera while in the same time will alert the people if fire was detected and also observed the speed of the fire which will benefit enormously to the fire fighters. With this, it was hope that fire can be detected effectively while alerting the people and giving valuable information to the fire fighters to do their job more effectively

A Novel Approach on Covid-19 Contact Tracing – Utilization of Low Calibrated Transmission Power & Signal Captures in BLE

Covid-19 pandemic has compelled countries to conduct contact tracing vigorously in order to curb the highly infectious virus from further spread. In this context, Bluetooth Low Energy (BLE) has been broadly used, utilizing Received Signal Strength Indicator (RSSI) for Close Contact Identification (CCI). However, many of the available solutions are not able to adhere to the guidelines provided by Centers for Disease Control (CDC) and Prevention which are: (1) Distance requirement of within 6-feet (~2 meters) and (2) Minimum 15-minutes duration for CCI. In providing some closure to the gap, we proposed a novel approach of utilizing: (1) Low calibrated transmission power (Tx) and (2) Number of signal captures. Our proposed approach is to lowly calibrate Tx so that when distance is at 2 meters between users, number signal capture gets lower as the chipset’s smallest RSSI sensitivity value has been reached. In this paper, complete experimentation for Proof of Concept (POC) and Pilot test conducted are demonstrated. Results obtained shows that the accuracy for POC utilizing signal captures for 2 0.3 m distance is at: (1) 71.43% for 5 users and (2) 70.69% for 9 users. While so, accuracy for the Pilot test when considering CCI on individual case-basis is at 95% for 5 users

Characterization and Dielectric Properties of LaMnO3 Thin Films by Spin Coating Method

This paper presents LaMnO3 nanostructured thin films were deposited on silicon substrate by using Single Wafer Spin Processor. LaMnO3 powder was firstly prepared by pyrolysis method. The structural, morphology and thermal properties of LMO powder was examined by XRD, SEM and TG-DTA. The films obtained from spin coating technique have been annealed at 500 ºC and 600 ºC for 1 h. Morphology, and structural properties of fabricated LaMnO3 thin films were investigated by SEM and XRD analysis. The objective of this research is to explore the structure, dielectric properties and processing of thin films that contain nanoscale embedded hard particles