Acoustic response of an injection system to high-frequency transverse acoustic fields

International audienceThe acoustic coupling between the injection system and the acoustic fluctuations in liquid rocket engine combustion chambers is an important issue in the understanding of the thermo-acoustic instability phenomenon. This paper presents the results of a wide-ranging parametric investigation of the acoustic response of a two-phase injection system submitted to a forced high-amplitude transverse acoustic field. Two domes, one for the gas and one for the liquid, were expressly designed to feed three identical coaxial injectors. The internal mode shapes of the domes were characterized by measuring pressure signals at different locations in the domes. Experimental mode shapes showed good agreement with those predicted by numerical simulations. Acoustic pressure amplitudes up to 23% of those induced in the main cavity can be found in both the gas and liquid domes. The response efficiency in a dome depends on the position of the injectors' exit in the acoustic field

Magnetic screening in proximity effect Josephson-junction arrays

The modulation with magnetic field of the sheet inductance measured on proximity effect Josephson-junction arrays (JJAs) is progressively vanishing on lowering the temperature, leading to a low temperature field-independent response. This behaviour is consistent with the decrease of the two-dimensional penetration length below the lattice parameter. Low temperature data are quantitatively compared with theoretical predictions based on the XY model in absence of thermal fluctuations. The results show that the description of a JJA within the XY model is incomplete and the system is put well beyond the weak screening limit which is usually assumed in order to invoke the well known frustrated XY model describing classical Josephson-junction arrays.Comment: 6 pages, 5 figure

Abnormal diffusion of a single vortex in the two dimensional XY model

We study thermal diffusion dynamics of a single vortex in two dimensional XY model. By numerical simulations we find an abnormal diffusion such that the mobility decreases with time $t$ as $1/\ln t$. In addition we construct a one dimensional diffusion-like equation to model the dynamics and confirm that it conserves quantitative property of the abnormal diffusion. By analyzing the reduced model, we find that the radius of the collectively moving region with the vortex core grows as $R(t) \propto t^{1/2}$. This suggests that the mobility of the vortex is described by dynamical correlation length as $1/\ln R(t)$.Comment: 13 pages, 8 figure

Multiport Vector Network Analyzer Configured in RF Interferometric Mode for Reference Impedance Renormalization

International audienceA novel active microwave interferometric technique is implemented on a multiport vector network analyzer for renormalizing the reference impedance 50 Ohms into any desired complex impedance. The resulting measured reflection coefficient around the new reference impedance is around zero, resulting in high measurement sensitivity. The method proposed avoids any external component commonly found in interferometric setups. In addition, a zeroing process including vector calibration is developed for broad frequency range and requires only a software procedure to be implemented in the system framework

Mammite à « Cryptococcus neoformans »

Ségretain G., Verge Jean, Drieux Henri, Mariat F., Paraf Alain, Labie C., Théron B. Mammite à «Cryptococcus neoformans». In: Bulletin de l'Académie Vétérinaire de France tome 109 n°1, 1956. pp. 33-41

Towards in-line determination of EVA Gel Content during PV modules Lamination Processes

Poly (ethylene-co-vinyl acetate) (EVA) is the major polymer used for photovoltaic (PV) modules encapsulation. Its degree of cross-linking (related to its gel content) is taken as a major quality reference. Differential Scanning Calorimetry (DSC) has been proven to be fast and effective but is to determine the gel content, however, destructive for the PV module. With the aim to develop a non-destructive quality assessment tool, a detailed discussion on the DSC thermogram of EVA PV encapsulant is presented here. A possible path towards a fast and non-destructive method for determing EVA gel content is proposed based on the DSC analysis

Vortex dynamics for two-dimensional XY models

Two-dimensional XY models with resistively shunted junction (RSJ) dynamics and time dependent Ginzburg-Landau (TDGL) dynamics are simulated and it is verified that the vortex response is well described by the Minnhagen phenomenology for both types of dynamics. Evidence is presented supporting that the dynamical critical exponent $z$ in the low-temperature phase is given by the scaling prediction (expressed in terms of the Coulomb gas temperature $T^{CG}$ and the vortex renormalization given by the dielectric constant $\tilde\epsilon$) $z=1/\tilde{\epsilon}T^{CG}-2\geq 2$ both for RSJ and TDGL and that the nonlinear IV exponent a is given by a=z+1 in the low-temperature phase. The results are discussed and compared with the results of other recent papers and the importance of the boundary conditions is emphasized.Comment: 21 pages including 15 figures, final versio

Vortex Lattice Melting in 2D Superconducting Networks and Films

We carry out MC studies of 2D superconducting networks, in an applied magnetic field, for square and honeycomb geometries. We consider both dilute systems (f=1/q) and systems near full frustration (f=1/2-1/q). For the dilute case (which models a film as q->infinity), we find two transitions: at T_c(f)~1/q there is a depinning transition from a pinned to a floating vortex lattice; at T_m(f)~constant the floating vortex lattice melts into an isotropic liquid. We analyze this melting according to the Kosterlitz- Thouless theory of dislocation mediated melting, and find that the melting is weakly first order. For the case near full frustration, the system can be described in terms of the density of defects in an otherwise fully frustrated vortex pattern. We find pinned solid, floating solid, and liquid defect phases, as well as a higher sharp transition corresponding to the disordering of the fully frustrated background.Comment: 55 pages, RevTex3.0, 25 figures (available by mail by contacting [email protected]

Dynamic scaling for 2D superconductors, Josephson junction arrays and superfluids

The value of the dynamic critical exponent $z$ is studied for two-dimensional superconducting, superfluid, and Josephson Junction array systems in zero magnetic field via the Fisher-Fisher-Huse dynamic scaling. We find $z\simeq5.6\pm0.3$, a relatively large value indicative of non-diffusive dynamics. Universality of the scaling function is tested and confirmed for the thinnest samples. We discuss the validity of the dynamic scaling analysis as well as the previous studies of the Kosterlitz-Thouless-Berezinskii transition in these systems, the results of which seem to be consistent with simple diffusion ($z=2$). Further studies are discussed and encouraged.Comment: 19 pages in two-column RevTex, 8 embedded EPS figure