9,906 research outputs found

    Grown-in defects and defects produced by 1-Me electron irradiated in Al0.3Ga0.7As P-N junction solar cells

    Get PDF
    Studies of grown-in defects and defects produced by the one-MeV electron irradiation in Al sub 0.3 Ga sub 0.7As p-n junction solar cells fabricated by liquid phase epitaxial (LPE) technique were made for the unirradiated and one-MeV electron irradiated samples, using DLTS and C-V methods. Defect and recombination parameters such as energy level, defect density, carrier capture cross sections and lifetimes were determined for various growth, annealing, and irradiation conditions

    The effect of manganese oxide on the sinterability of hydroxyapatite

    Get PDF
    The sinterability of manganese oxide (MnO2) doped hydroxyapatite (HA) ranging from 0.05 to 1 wt% was investigated. Green samples were prepared and sintered in air at temperatures ranging from 1000 to 1400 °C. Sintered bodies were characterized to determine the phase stability, grain size, bulk density, hardness, fracture toughness and Young's modulus. XRD analysis revealed that the HA phase stability was not disrupted throughout the sintering regime employed. In general, samples containing less than 0.5 wt% MnO2 and when sintered at lower temperatures exhibited higher mechanical properties than the undoped HA. The study revealed that all the MnO2-doped HA achieved >99% relative density when sintered at 1100–1250 °C as compared to the undoped HA which could only attained highest value of 98.9% at 1150 °C. The addition of 0.05 wt% MnO2 was found to be most beneficial as the samples exhibited the highest hardness of 7.58 GPa and fracture toughness of 1.65 MPam1/2 as compared to 5.72 GPa and 1.22 MPam1/2 for the undoped HA when sintered at 1000 °C. Additionally, it was found that the MnO2-doped samples attained E values above 110 GPa when sintered at temperature as low as 1000 °C if compared to 1050 °C for the undoped HA

    Online Assessment of Satellite-Derived Global Precipitation Products

    Get PDF
    Precipitation is difficult to measure and predict. Each year droughts and floods cause severe property damages and human casualties around the world. Accurate measurement and forecast are important for mitigation and preparedness efforts. Significant progress has been made over the past decade in satellite precipitation product development. In particular, products' spatial and temporal resolutions as well as timely availability have been improved by blended techniques. Their resulting products are widely used in various research and applications. However biases and uncertainties are common among precipitation products and an obstacle exists in quickly gaining knowledge of product quality, biases and behavior at a local or regional scale, namely user defined areas or points of interest. Current online inter-comparison and validation services have not addressed this issue adequately. To address this issue, we have developed a prototype to inter-compare satellite derived daily products in the TRMM Online Visualization and Analysis System (TOVAS). Despite its limited functionality and datasets, users can use this tool to generate customized plots within the United States for 2005. In addition, users can download customized data for further analysis, e.g. comparing their gauge data. To meet increasing demands, we plan to increase the temporal coverage and expanded the spatial coverage from the United States to the globe. More products have been added as well. In this poster, we present two new tools: Inter-comparison of 3B42RT and 3B42 Inter-comparison of V6 and V7 TRMM L-3 monthly products The future plans include integrating IPWG (International Precipitation Working Group) Validation Algorithms/statistics, allowing users to generate customized plots and data. In addition, we will expand the current daily products to monthly and their climatology products. Whenever the TRMM science team changes their product version number, users would like to know the differences by inter-comparing both versions of TRMM products in their areas of interest. Making this service available to users will help them to better understand associated changes. We plan to implement this inter-comparison in TRMM standard monthly products with the IPWG algorithms. The plans outlined above will complement and accelerate the existing and ongoing validation activities in the community as well as enhance data services for TRMM and the future Global Precipitation Mission (GPM)

    Broadband spin-controlled focusing via logarithmic-spiral nanoslits of varying width

    Get PDF
    This work presents analytical, numerical and experimental demonstrations of light diffracted through a logarithmic spiral (LS) nanoslit, which forms a type of switchable and focus-tunable structure. Owing to a strong dependence on the incident photon spin, the proposed LS-nanoslit converges incoming light of opposite handedness (to that of the LS-nanoslit) into a confined subwavelength spot, while it shapes light with similar chirality into a donut-like intensity profile. Benefitting from the varying width of the LS-nanoslit, different incident wavelengths interfere constructively at different positions, i.e., the focal length shifts from 7.5 μm (at λ = 632.8 nm) to 10 μm (at λ = 488 nm), which opens up new opportunities for tuning and spatially separating broadband light at the micrometer scale

    Predictive Modelling Using Unstructured Data From Online Forums: A Case Study on E-cigarette Users

    Get PDF
    In the age of the digital economy, social media, forums and other online platforms have played active parts in our daily activities. The amount of data digitized and recorded in these platforms have surged exponentially. Many believed that this underexplored unstructured data sources have huge potential in offering insights to policy makers and companies. This paper aims to propose a hybrid approach using inductive and deductive reasoning to identify motivational factors to use e-cigarettes for predictive modelling. A total of 790 comments and discussions relevant to e-cigarette use and motivations to use e-cigarette were scraped and stored from online forums like Reddit, Vapingunderground and e-cigarette-forum. A series of text analytics were conducted on the text corpus and the cluster analysis enabled us to build a predictive model. Using Bayesian Structural Equation Modelling, we concluded that the constructs derived by clustering, i.e. Cost and Convenience and Enjoyment, have significant associations with smokers trying to quit smoking. While health-related issues were inherent to the notion of quitting smoking, enjoyment, cost and convenience were motivational factors which will generate favourable response towards quitting smoking. The findings showed encouraging results from a methodological standpoint and offered insights to policy makers and companies on health-related issues pertaining to the use of e-cigarettes

    TRMM Precipitation Application Examples Using Data Services at NASA GES DISC

    Get PDF
    Data services to support precipitation applications are important for maximizing the NASA TRMM (Tropical Rainfall Measuring Mission) and the future GPM (Global Precipitation Mission) mission's societal benefits. TRMM Application examples using data services at the NASA GES DISC, including samples from users around the world will be presented in this poster. Precipitation applications often require near-real-time support. The GES DISC provides such support through: 1) Providing near-real-time precipitation products through TOVAS; 2) Maps of current conditions for monitoring precipitation and its anomaly around the world; 3) A user friendly tool (TOVAS) to analyze and visualize near-real-time and historical precipitation products; and 4) The GES DISC Hurricane Portal that provides near-real-time monitoring services for the Atlantic basin. Since the launch of TRMM, the GES DISC has developed data services to support precipitation applications around the world. In addition to the near-real-time services, other services include: 1) User friendly TRMM Online Visualization and Analysis System (TOVAS; URL: http://disc2.nascom.nasa.gov/Giovanni/tovas/); 2) Mirador (http://mirador.gsfc.nasa.gov/), a simplified interface for searching, browsing, and ordering Earth science data at GES DISC. Mirador is designed to be fast and easy to learn; 3) Data via OPeNDAP (http://disc.sci.gsfc.nasa.gov/services/opendap/). The OPeNDAP provides remote access to individual variables within datasets in a form usable by many tools, such as IDV, McIDAS-V, Panoply, Ferret and GrADS; and 4) The Open Geospatial Consortium (OGC) Web Map Service (WMS) (http://disc.sci.gsfc.nasa.gov/services/wxs_ogc.shtml). The WMS is an interface that allows the use of data and enables clients to build customized maps with data coming from a different network

    Acquired resistance to anti-PD1 therapy: checkmate to checkpoint blockade?

    Get PDF
    Editorial summary Anti-programmed cell death 1 (PD1) immunotherapies are among the most effective anti-cancer immunotherapies available; however, a large number of patients present with or develop resistance to them. Unfortunately, very little is known regarding the mechanisms of resistance to such therapies. A recent study sought to identify mutations associated with resistance to anti-PD1 therapy. Results from this study demonstrated that mutations which affected the sensitivity of tumor cells to T-cell-derived interferons, and mutations limiting tumor-cell antigen presentation, could cause acquired resistance. These findings have significant implications for understanding the mechanisms by which anti-PD1 therapies exert their efficacy, comprehending why and how some patients acquire resistance over time, and ultimately guiding the development of combination therapies designed to overcome, or potentially prevent, the development of acquired immunotherapeutic resistance
    corecore