7,115 research outputs found
Resources for a lunar base: Rocks, minerals, and soil of the Moon
The rocks and minerals of the Moon will be included among the raw materials used to construct a lunar base. The lunar regolith, the fragmental material present on the surface of the Moon, is composed mostly of disaggregated rocks and minerals, but also includes glassy fragments fused together by meteorite impacts. The finer fraction of the regolith (i.e., less than 1 cm) is informally referred to as soil. The soil is probably the most important portion of the regolith for use at a lunar base. For example, soil can be used as insulation against cosmic rays, for lunar ceramics and abodes, or for growing plants. The soil contains abundant solar-wind-implanted elements as well as various minerals, particularly oxide phases, that are of potential economic importance. For example, these components of the soil are sources of oxygen and hydrogen for rocket fuel, helium for nuclear energy, and metals such as Fe, Al, Si, and Ti
Return to the Moon: Lunar robotic science missions
There are two important aspects of the Moon and its materials which must be addressed in preparation for a manned return to the Moon and establishment of a lunar base. These involve its geologic science and resource utilization. Knowledge of the Moon forms the basis for interpretations of the planetary science of the terrestrial planets and their satellites; and there are numerous exciting explorations into the geologic science of the Moon to be conducted using orbiter and lander missions. In addition, the rocks and minerals and soils of the Moon will be the basic raw materials for a lunar outpost; and the In-Situ Resource Utilization (ISRU) of lunar materials must be considered in detail before any manned return to the Moon. Both of these fields -- planetary science and resource assessment -- will necessitate the collection of considerable amounts of new data, only obtainable from lunar-orbit remote sensing and robotic landers. For over fifteen years, there have been a considerable number of workshops, meetings, etc. with their subsequent 'white papers' which have detailed plans for a return to the Moon. The Lunar Observer mission, although grandiose, seems to have been too expensive for the austere budgets of the last several years. However, the tens of thousands of man-hours that have gone into 'brainstorming' and production of plans and reports have provided the precursor material for today's missions. It has been only since last year (1991) that realistic optimism for lunar orbiters and soft landers has come forth. Plans are for 1995 and 1996 'Early Robotic Missions' to the Moon, with the collection of data necessary for answering several of the major problems in lunar science, as well as for resource and site evaluation, in preparation for soft landers and a manned-presence on the Moon
The formation of ore mineral deposits on the Moon: A feasibility study
Most of the ore deposits on Earth are the direct result of formation by hydrothermal solutions. Analogous mineral concentrations do not occur on the Moon, however, because of the absence of water. Stratified ore deposits form in layered instrusives on Earth due to fractional crystallization of magma and crystal settling of high-density minerals, particularly chromium in the mineral chromite. We have evaluated the possibility of such mineral deposition on the Moon, based upon considerations of 'particle settling velocities' in lunar vs. terrestrial magmas. A first approximation of Stoke's Law would seem to indicate that the lower lunar gravity (1/6 terrestrial) would result in slower crystal settling on the Moon. However, the viscosity of the silicate melt is the most important factor affecting the settling velocity. The viscosities of typical lunar basaltic melts are 10-100 times less than their terrestrial analogs. These lower viscosities result from two factors: (1) lunar basaltic melts are typically higher in FeO and lower in Al2O3, Na2O, and K2O than terrestrial melts; and (2) lunar igneous melts and phase equilibria tend to be 100-150 C higher than terrestrial, largely because of the general paucity of water and other volatile phases on the Moon. Therefore, particle settling velocities on the Moon are 5-10 times greater than those on Earth. It is highly probable that stratiform ore deposits similar to those on Earth exist on the Moon. The most likely ore minerals involved are chromite, ilmenite, and native FeNi metal. In addition, the greater settling velocities of periodotite in lunar magmas indicate that the buoyancy effects of the melt are less than on Earth. Consequently, the possibility is considerably less than on Earth of deep-seated volcanism transporting upper mantle/lower crustal xenoliths to the surface of the Moon, such as occurs in kimberlites on Earth
The Apollo 17 mare basalts: Serenely sampling Taurus-Littrow
As we are all aware, the Apollo 17 mission marked the final manned lunar landing of the Apollo program. The lunar module (LM) landed approximately 0.7 km due east of Camelot Crater in the Taurus-Littrow region on the southwestern edge of Mare Serenitatis. Three extravehicular activities (EVA's) were performed, the first concentrating around the LM and including station 1 approximately 1.1 km south-southeast of the LM at the northwestern edge of Steno Crater. The second traversed approximately 8 km west of the LM to include stations 2, 3, 4, and 5, and the third EVA traversed approximately 4.5 km to the northwest of the LM to include stations 6, 7, 8, and 9. This final manned mission returned the largest quantity of lunar rock samples, 110.5 kg/243.7 lb, and included soils, breccias, highland samples, and mare basalts. This abstract concentrates upon the Apollo 17 mare basalt samples
Using Apollo 17 high-Ti mare basalts as windows to the lunar mantle
The Apollo 17 high-Ti mare basalts are derived from source regions containing plagioclase that was not retained in the residue. Ilmenite appears to remain as a residual phase, but plagioclase is exhausted. The open-system behavior of the type B2 basalts results in slightly higher Yb/Hf and La/Sm ratios. The nature of the added component is not clear, but may be a KREEP derivative or residue. The recognition of plagioclase in the source(s) of these basalts suggests that the location of the source region(s) would be more likely to be less than 150 km (i.e., closer to the plagioclase-rich crust), which would allow incorporation of plagioclase into the source through incomplete separation of crustal feldspar
Wanted: Lunar detectives to unravel the mysteries of the Moon! Crime to be solved: Mass extinctions on the Moon by meteorite impact!
The criteria and clues for identifying meteorite contamination are outlined to aid in the quest for more knowledge regarding the evolution of the Moon and the early Earth. The Warren and Wasson seven criteria for establishing the pristine nature of highland rocks are presented. Other topics covered include iron/nickel metals, monomict nature, and lunar glasses. The major conclusion is that pristinity should not be the primary consideration in the study of lunar rocks. The most important criterion to establish is whether or not the lunar sample contains more than one lunar rock type. Even if a sample is non-pristine, as long as only one lunar rock type is present, petrogenetic interpretation can still be carried out
neoKREEP: A new lunar component at Apollo 17
The Apollo 11 (Mare Tranquillitatis) and Apollo 17 (Mare Serenitatis) landing sites are important as the only sources of high-Ti basalt visited by the Apollo missions. The lunar high-Ti basalts (greater than 6 percent TiO2) have no volumetrically comparable analogs among terrestrial basalts and require the presence of ilmenite in the source region, probably representing cumulates produced late in the crystallization of the lunar magma ocean. Six principal groups of high-Ti basalts are described, three from each of the two sites
Melting of cognetic depleted and enriched reservoirs and the production of high Ti Mare basalts
Implicit in current understanding of the location of terrestrial enriched and depleted reservoirs is the notion that they are spatially separated. The depleted reservoir on Earth is situated in the upper mantle, and the complementary enriched reservoir is located in the crust. However, Earth reservoirs are continually being modified by recycling driven by mantle convection. The Moon is demonstrably different from Earth in that its evolution was arrested relatively early - effectively with 1.5 Ga of its formation. It is possible that crystallized trapped liquids (from the late stages of a magma ocean) have been preserved as LILE-enriched portions of the lunar mantle. This would lead to depleted (cumulate) and enriched (magma ocean residual liquid) reservoirs in the lunar upper mantle. There is no evidence for significant recycling from the highland crust back into the mantle. Therefore, reservoirs created at the Moon's inception may have remained intact for over 4.0 Ga. The topics discussed include the following: (1) radiogenic isotopes in high-Ti mare basalts; (2) formation of cogenetic depleted and enriched reservoirs; and (3) melting of the source to achieve high-Ti mare basalts
Origin of a metamorphosed lithic clast in CM chondrite Grove Mountains 021536
A metamorphosed lithic clast was discovered in the CM chondrite Grove Mountains 021536, which was collected in the Antarctica by the Chinese Antarctic Research Exploration team. The lithic clast is composed mainly of Fe-rich olivine (Fo62) with minor diopside (Fs_(9.7ā11.1)Wo_(48.3ā51.6)), plagioclase (An_(43ā46.5)), nepheline, merrillite, Al-rich chromite (21.8 wt% Al_2O_3; 4.43 wt% TiO_2), and pentlandite. Ī^(17)O values of olivine in the lithic clast vary from ā3.9ā° to ā0.8ā°. Mineral compositions and oxygen isotopic compositions of olivine suggest that the lithic clast has an exotic source different from the CM chondrite parent body. The clast could be derived from strong thermal metamorphism of pre-existing chondrule that has experienced low-temperature anhydrous alteration. The lithic clast is similar in mineral assemblage and chemistry to a few clasts observed in oxidized CV3 chondrites (Mokoia and Yamato-86009) and might have been derived from the interior of the primitive CV asteroid. The apparent lack of hydration in the lithic clast indicates that the clast accreted into the CM chondrite after hydration of the CM components
Constraints on the genesis and evolution of the Moon\u27s magma ocean and derivative cumulate sources as supported by lunar meteorites
It is generally considered that the outer portion of the Moon was molten in its early history. Antarctic lunar meteorites support this supposition, indicating the presence of a global plagioclase-rich crust derived from magma ocean flotation cumulates. Lunar meteorites also contain a significant very low-Ti (VLT) mare basalt component which was likely generated by the melting of a cumulate mantle formed in an early moon-wide magma ocean. Early in the evolution of the mantle, when the lunar magma ocean (LMO) still was largely liquid, it is likely that vigorous convection was an important factor in crystallization. Such convection would allow crystals to remain suspended and in equilibrium with the LMO liquid for relatively long periods of time. This extended period of equilibrium crystallization would then have been followed by fractional crystallization once plagioclase became a liquidus phase and began to float to form the lunar highlands crust. The residual liquid after 80-90 percent crystallization was very evolved (in fact KREEPy) and, even in small proportions (1-5%), would have a noticeable effect on the trace-element chemistry of melts generated from these cumulates. This trapped residual liquid would elevate total REE abundances in the cumulate pile, while synchronously deepening the already negative Eu anomaly. The LMO liquid calculated after extensive crystallization (>99.5% crystallized) has a composition which is similar to that recorded in quartz monzodiorites. This evolved liquid could be represented by the sparse KREEP component found in lunar meteorites. The mare basalt component found in such meteorites as EET87521 can be generated by fractional crystallization of a more primitive magma similar in composition to Apollo VLT picritic glass beads. This picritic magma can be produced by melting of a cumulate source in the lunar upper mantle
- ā¦