1,027 research outputs found
Recommended from our members
Experimental study of non-Newtonian fluid flow in microchannels
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Non-Newtonian fluid flow in microchannels has significant applications in science and engineering. The effects of temperature and PAM solution concentrations on rheological parameters are analyzed by measuring them with rotating cylinder viscometer. Flow characteristics for deionized water and PAM solutions in fused silica microtubes with diameters ranging from 50 to 320μm, fused silica square microchannels with diameters 75 and 100μm, and stainless steel microtubes with diameters from 120 to 362μm, are studied experimentally. The test results for deionized water in microchannels are in good agreement with theoretical predictions for conventional-size channels. Friction factors of PAM solutions are much higher than theoretical predictions. With the PAM concentration reduced, the deviation is more, which is possibly caused by the significant electroviscous effect on PAM solutions flow in microchannels
Numerical investigation of room temperature magnetic refrigerator using microchannel regenerators
Performance optimisation of room temperature magnetic refrigerator with layered/multimaterial microchannel regenerators
Fabrication of Densely Packed AlN Nanowires by a Chemical Conversion of Al2O3Nanowires Based on Porous Anodic Alumina Film
Porous alumina film on aluminum with gel-like pore wall was prepared by a two-step anodization of aluminum, and the corresponding gel-like porous film was etched in diluted NaOH solution to produce alumina nanowires in the form of densely packed alignment. The resultant alumina nanowires were reacted with NH3and evaporated aluminum at an elevated temperature to be converted into densely packed aluminum nitride (AlN) nanowires. The AlN nanowires have a diameter of 15–20 nm larger than that of the alumina nanowires due to the supplement of the additional evaporated aluminum. The results suggest that it might be possible to prepare other aluminum compound nanowires through similar process
Improved isolation of cadmium from paddy soil by novel technology based on pore water drainage with graphite-contained electro-kinetic geosynthetics
Novel soil remediation equipment based on electro-kinetic geosynthetics (EKG) was developed for in situ isolation of metals from paddy soil. Two mutually independent field plot experiments A and B (with and without electric current applied) were conducted. After saturation using ferric chloride (FeCl3) and calcium chloride (CaCl2), soil water drainage capacity, soil cadmium (Cd) removal performance, energy consumption as well as soil residual of iron (Fe) and chloride (Cl) were assessed. Cadmium dissolved in the soil matrix and resulted in a 100% increase of diethylenetriamine-pentaacetic acid (DTPA) extracted phyto-available Cd. The total soil Cd content reductions were 15.20% and 26.58% for groups A and B, respectively, and electric field applications resulted in a 74.87% increase of soil total Cd removal. The electric energy consumption was only 2.17 kWh/m3 for group B. Drainage by gravity contributed to > 90% of the overall soil dewatering capacity. Compared to conventional electro-kinetic technology, excellent and fast soil water drainage resulted in negligible hydrogen ion (H+) and hydroxide ion (OH−) accumulation at nearby electrode zones, which addressed the challenge of anode corrosion and cathode precipitation of soil metals. External addition of FeCl3 and CaCl2 caused soil Fe and Cl residuals and led to 4.33–7.59% and 139–172% acceptable augments in soil total Fe and Cl content, correspondingly, if compared to original untreated soils. Therefore, the novel soil remediation equipment developed based on EKG can be regarded as a promising new in situ technology for thoroughly isolating metals from large-scale paddy soil fields
Probe R-parity violating stop resonance at the LHeC
We investigate the possibility of detecting single sqaurk production at the
proposed LHeC collider, in the framework of R-parity violating supersymmetry.
Taking advantage of the enhancement of the direct resonance production of
squark and the distinctive kinematics distributions of two body decay final states, the LHeC provides excellent opportunities of
probing R-violating interactions at unprecedented level
compared to all the knowledge derived from indirect low energy nucleon
measurements. If no apparent deviation from SM predictions on high invariant
mass of muon and b-quark final states at the LHeC with 1 data, the
sensitivities on coupling constant can be improved by nearly four orders, at energy
scale about 100 GeV.Comment: 9 pages, 8 figure
Arc Discharge Synthesis and Photoluminescence of 3D Feather-like AlN Nanostructures
A complex three-dimensional (3D) feather-like AlN nanostructure was synthesized by a direct reaction of high-purity Al granules with nitrogen using an arc discharge method. By adjusting the discharge time, a coral-like nanostructure, which evolved from the feather-like nanostructure, has also been observed. The novel 3D feather-like AlN nanostructure has a hierarchical dendritic structure, which means that the angle between the trunk stem and its branch is always about 30° in any part of the structure. The fine branches on the surface of the feather-like nanostructure have shown a uniform fish scale shape, which are about 100 nm long, 10 nm thick and several tens of nanometers in width. An alternate growth model has been proposed to explain the novel nanostructure. The spectrum of the feather-like products shows a strong blue emission band centered at 438 nm (2.84 eV), which indicates their potential application as blue light-emitting diodes
Detection and Phylogenetic Analysis of Wolbachia in the Asiatic Rice Leafroller, Cnaphalocrocis medinalis, in Chinese Populations
Wolbachia are a group of intracellular inherited endosymbiontic bacteria infecting a wide range of insects. In this study the infection status of Wolbachia (Rickettsiales: Rickettsiaceae) was measured in the Asiatic rice leafroller, Cnaphalocrocis medinalis (Guenée) (Lepidoptera: Pyralidae), from twenty locations in China by sequencing wsp, ftsZ and 16S rDNA genes. The results showed high infection rates of Wolbachia in C. medinalis populations. Wolbachia was detected in all geographically separate populations; the average infection rate was ∼ 62.5%, and the highest rates were 90% in Wenzhou and Yangzhou populations. The Wolbachia detected in different C. medinalis populations were 100% identical to each other when wsp, ftsZ, and 16S rDNA sequences were compared, with all sequences belonging to the Wolbachia B supergroup. Based on wsp, ftsZ and 16S rDNA sequences of Wolbachia, three phylogenetic trees of similar pattern emerged. This analysis indicated the possibility of inter-species and intra-species horizontal transmission of Wolbachia in different arthropods in related geographical regions. The migration route of C. medinalis in mainland China was also discussed since large differentiation had been found between the wsp sequences of Chinese and Thai populations
Analysis and Design of a Compact Leaky-Wave Antenna for Wide-Band Broadside Radiation
A low-cost compact planar leaky-wave antenna (LWA) is proposed offering directive broadside radiation over a significantly wide bandwidth. The design is based on an annular metallic strip grating (MSG) configuration, placed on top of a dual-layer grounded dielectric substrate. This defines a new two-layer parallel-plate open waveguide, whose operational principles are accurately investigated. To assist in our antenna design, a method-of-moments dispersion analysis has been developed to characterize the relevant TM and TE modes of the perturbed guiding structure. By proper selection of the MSG for a fabricated prototype and its supporting dielectric layers as well as the practical TM antenna feed embedded in the bottom ground plane, far-field pencil-beam patterns are observed at broadside and over a wide frequency range, i.e., from 21.9 GHz to 23.9 GHz, defining a radiating percentage bandwidth of more than 8.5%. This can be explained by a dominantly excited TM mode, with low dispersion, employed to generate a two-sided far-field beam pattern which combines to produce a single beam at broadside over frequency. Some applications of this planar antenna include radar and satellite communications at microwave and millimeter-wave frequencies as well as future 5G communication devices and wireless power transmission systems
- …