Depth-Sensing Indentation on REBa2Cu3O(7-\delta) Single Crystals obtained from Xenotime Mineral

A natural mixture of heavy rare earths oxides extracted from xenotime mineral have been used to prepare large single crystals of high-temperature REBa2Cu3O(7-\delta) superconductor grown using the CuO-BaO self-flux method. Its mechanical properties along the ab-plane were characterized using instrumented indentation. Hardness and elastic modulus were obtained by the Oliver and Pharr method and corresponds to 7.4 \pm 0.2 GPa and in range 135-175 GPa at small depths, respectively. Increasing the load promotes the nucleation of lateral cracks that causes a decrease in hardness and the measured elastic modulus by instrumented indentation at higher loads. The indentation fracture toughness was estimated by measuring the radial crack length from cube-corner indentations at various loads and was 0.8 \pm 0.2 MPa.m1/2. The observed slip systems of REBa2Cu3O(7-\delta) single crystals were [100](001) and [010](001), the same as for YBa2Cu3O(7-\delta) single crystals. The initial stages of deformation and fracture in the indentation process were investigated. The hardness and elastic modulus were not strongly modified by the crystallographic orientation in the ab-plane. This was interpreted in terms of the resolved shear stresses in the active slip systems. Evidence of cracking along the {100} and {110} planes on the ab-plane was observed. As a conclusion, the mechanical properties of REBa2Cu3O(7-\delta) single crystals prepared from xenotime are equivalent to those of YBa2Cu3O(7-\delta) single crystals produced by conventional rare earths oxides.Comment: The paper will appear in Volume 42 (2012) of the Brazilian Journal of Physic

Influence of microporosity and macroporosity on the mechanical properties of biphasic calcium phosphate bioceramics: Modelling and experiment

Macroporous biphasic calcium phosphate (BCP) bioceramics, for bone substitution applications, have been synthesized, cold isostatically pressed and pressureless sintered, using naphthalene particles as a porogen to produce macropores. The resulting materials are mixtures of P-tricalcium phosphate and hydroxyapatite with various microporosities and macroporosities. Mechanical properties (Young's modulus, compressive strength and fracture toughness) were measured on specimens over the widest attainable ranges of porosities, and compared to previously proposed analytical models and hypotheses. These models describe the evolution of the mechanical properties as functions of macroporosity and microporosity separately, the strength model considering macropores as critical flaws in the ceramic. Results show that the presence of macropores strongly influences the critical flaw size, but the latter appears to increase with macroporosity. This phenomenon can be explained by the presence of clusters of macropores, acting as critical flaws, becoming larger as macroporosity increases. (C) 2009 Elsevier Ltd. All rights reserved

The new epsilon Bi²O³: The particular role of O-centred tetrahedra in bismuth compounds.

communication oral