8 research outputs found
Experiment and Prediction of Ablation Depth in Excimer Laser Micromachining of Optical Polymer Waveguides
Extending the data transfer rates through dense interconnections at inter- and intraboard levels is a well-established technique especially in consumer electronics at the expense of more cross talk, electromagnetic interference (EMI), and power dissipation. Optical transmission using optical fibre is practically immune to the aforementioned factors. Among the manufacturing methods, UV laser ablation using an excimer laser has been repeatedly demonstrated as a suitable technique to fabricate multimode polymer waveguides. However, the main challenge is to precisely control and predict the topology of the waveguides without the need for extensive characterisation which is both time consuming and costly. In this paper, the authors present experimental results of investigation to relate the fluence, scanning speed, number of shots, and passes at varying pulse repetition rate with the depth of ablation of an acrylate-based photopolymer. The depth of ablation essentially affects total internal reflection and insertion loss, and these must be kept at minimum for a successful optical interconnection on printed circuit boards. The results are then used to predict depth of ablation for this material by means of adaptive neurofuzzy inference system (ANFIS) modelling. The predicted results, with a correlation of 0.9993, show good agreement with the experimental values. This finding will be useful in better predictions along with resource optimisation and ultimately helps in reducing cost of polymer waveguide fabrication.</jats:p
A feasibility study of low-power laser trepanning drilling of composite using modified DVD writer
In the present study, laser cutting of cotton fiber composite laminate is experimented using a modified DVD writer drive. A 250 mW diode laser is initially extracted from a DVD writer drive, and then regulated by a custom-made laser driver circuit designed using a Proteus® software. Experimental tests are carried out using multi-pass laser trepanning drilling at different drilling speeds and standoff distances (SODs). The cut quality is evaluated by measuring the extent of both oxide and resolidified resin regions. It was discovered high speed of trepanning drilling and positive SOD significantly improve cutting region quality. Furthermore, positive and negative SODs require relatively high number of passes at different drilling speeds. From SEM micrographs, it is found out that the crack formation and fiber protruding happen in thedrilling area due to thermal stresses and matrix vaporization
Current progress on removal of recalcitrance coloured particles from anaerobically treated effluent using coagulation–flocculation
The palm oil industry is the most important agro industries in Malaysia and most of the mills adopt anaerobic digestion as their primary treatment for palm oil mill effluent (POME). Due to the public concern, decolourisation of anaerobically treated POME (AnPOME) is becoming a great concern. Presence of recalcitrant-coloured particles hinders biological processes and coagulation–flocculation may able to remove these coloured particles. Several types of inorganic and polymers-based coagulant/flocculant aids for coagulation–flocculation of AnPOME have been reviewed. Researchers are currently interested in using natural coagulant and flocculant aids. Modification of the properties of natural coagulant and flocculant aids enhanced coagulation–flocculation performance. Modelling and optimization of the coagulation–flocculation process have also been reviewed. Chemical sludge has the potential for plant growth that can be evaluated through pot trials and phytotoxicity test