A flexible and highly sensitive pressure sensor based on a PDMS foam coated with graphene nanoplatelets

The demand for high performance multifunctional wearable devices is more and more pushing towards the development of novel low-cost, soft and flexible sensors with high sensitivity. In the present work, we describe the fabrication process and the properties of new polydimethylsiloxane (PDMS) foams loaded with multilayer graphene nanoplatelets (MLGs) for application as high sensitive piezoresistive pressure sensors. The effective DC conductivity of the produced foams is measured as a function of MLG loading. The piezoresistive response of the MLG-PDMS foam-based sensor at different strain rates is assessed through quasi-static pressure tests. The results of the experimental investigations demonstrated that sensor loaded with 0.96 wt.% of MLGs is characterized by a highly repeatable pressure-dependent conductance after a few stabilization cycles and it is suitable for detecting compressive stresses as low as 10 kPa, with a sensitivity of 0.23 kPa−1, corresponding to an applied pressure of 70 kPa. Moreover, it is estimated that the sensor is able to detect pressure variations of ~1 Pa. Therefore, the new graphene-PDMS composite foam is a lightweight cost-effective material, suitable for sensing applications in the subtle or low and medium pressure ranges

Piezoelectric effect and electroactive phase nucleation in self-standing films of unpoled PVDF nanocomposite films

Novel polymer-based piezoelectric nanocomposites with enhanced electromechanical properties open new opportunities for the development of wearable energy harvesters and sensors. This paper investigates how the dissolution of different types of hexahydrate metal salts affects β-phase content and piezoelectric response (d33) at nano-and macroscales of polyvinylidene fluoride (PVDF) nanocomposite films. The strongest enhancement of the piezoresponse is observed in PVDF nanocomposites processed with Mg(NO3)2·6H2O. The increased piezoresponse is attributed to the synergistic effect of the dipole moment associated with the nucleation of the electroactive phase and with the electrostatic interaction between the CF2group of PVDF and the dissolved salt through hydrogen bonding. The combination of nanofillers like graphene nanoplatelets or zinc oxide nanorods with the hexahydrate salt dissolution in PVDF results in a dramatic reduction of d33, because the nanofiller assumes a competitive role with respect to H-bond formation between PVDF and the dissolved metal salt. The measured peak value of d33reaches the local value of 13.49 pm/V, with an average of 8.88 pm/V over an area of 1 cm2. The proposed selection of metal salt enables low-cost production of piezoelectric PVDF nanocomposite films, without electrical poling or mechanical stretching, offering new opportunities for the development of devices for energy harvesting and wearable sensors

Electro-mechanical properties of multilayer graphene-based polymeric composite obtained through a capillary rise method

A new sensor made of a vinyl-ester polymer composite filled with multilayer graphene nanoplatelets (MLG) is produced through an innovative capillary rise method for application in strain sensing and structural health monitoring. The new sensor is characterized by high stability of the piezoresistive response under quasi-static consecutive loading/unloading cycles and monotonic tests. This is due to the peculiarity of the fabrication process that ensures a smooth and clean surface of the sensor, without the presence of filler agglomerates acting as micro- or macro-sized defects in the composite

Electrical, mechanical and electromechanical properties of graphene-thermoset polymer composites produced using acetone-DMF solvents

Recently, graphene-polymer composites gained a central role in advanced stress and strain sensing. A fundamental step in the production of epoxy-composites filled with graphene nanoplatelets (GNPs) consists in the exfoliation and dispersion of expanded graphite in a proper solvent, in the mixing of the resulting GNP suspension with the polymer matrix, and in the final removal of the solvent from the composite before curing through evaporation. The effects of traces of residual solvent on polymer curing process are usually overlooked, even if it has been found that even a small amount of residual solvent can affect the mechanical properties of the final composite. In this paper, we show that residual traces of N,N′-Dimethylformamide (DMF) in vinylester epoxy composites can induce relevant variations of the electrical, mechanical and electromechanical properties of the cured GNP-composite. To this purpose, a complete analysis of the morphological and structural characteristics of the composite samples produced using different solvent mixtures (combining acetone and DMF) is performed. Moreover, electrical, mechanical and electromechanical properties of the produced composites are assessed. In particular, the effect on the piezoresistive response of the use of DMF in the solvent mixture is analyzed using an experimental strain dependent percolation law to fit the measured electromechanical data. It is shown that the composites realized using a higher amount of DMF are characterized by a higher electrical conductivity and by a strong reduction of Young’s Modulus

Electromagnetic and electromechanical applications of graphene-based materials

This volume contains the extended abstracts of the contributions presented at the workshop Nanoscale Excitations in Emergent Materials (NEEM 2015) held in Rome from 12 to 14 October 2015, an event organized and supported in the framework of the Bilateral Cooperation Agreement between Italy and India within the project of major relevance "Investigating local structure and magnetism of cobalt nano-structures", funded by the Italian Ministry of Foreign Affairs and the Department of Science and Technology in India

Effect of electric field polarization and temperature on the effective permittivity and conductivity of porous anodic aluminium oxide membranes

Porous insulators offer new opportunities for the controlled guest–host synthesis of nanowires for future integrated circuits characterized by low propagation delay, crosstalk and power consumption. We propose a method to estimate the effect of the electric field polarization and temperature on the electrical properties of different types of synthesized porous anodic aluminium oxide membranes. It results that the effective permittivity along the pore axis is generally 20% higher than the one in the orthogonal direction. The type of solution and the voltage level applied during anodization are the main parameters affecting the AAO templates characteristics, i.e. their porosity and chemical content. The values of permittivity of the final material, are typically in the range 2.6–3.2 for large pore diameter membranes including phosphorus element and having a low water content, and in the range 3.5–4 for the ones with smaller pores, and showing sulphur element incorporation. Moreover, the dc conductivity of the different membranes appears to be correlated to the pore density

Electrical conductivity of carbon nanotubes grown inside a mesoporous anodic aluminium oxide membrane

Well-aligned, open-ended carbon nanotubes (CNTs), free of catalyst and other carbon products, were synthesized inside the pores of an anodic aluminium oxide (AO) template without using any metallic catalyst. The CNTs and the CNT/AO composites were characterized by scanning and transmission electron microscopy, thermogravimetric analysis, Raman spectroscopy and X-ray diffraction. Particular care was devoted to the reactor design, synthesis conditions, the catalytic role of the templating alumina surface and the preservation of the alumina structure. The transport properties (sorption, diffusion and permeability) to water vapor were evaluated for both the alumina template and the CNT/AO composite membrane. The measured effective electrical volume conductivity of the CNT/AO composite was found ranging from a few up to 10 kS/m, in line with the recent literature. The estimated averaged values of the CNTs-wall conductivity was around 50 kS/m

Vernice polimerica conduttiva piezoresistiva a base acquosa contenente grafene per applicazioni elettromagnetiche e di sensoristica

La presente invenzione si colloca nell’ambito delle nanotecnologie e più specificatamente si riferisce alla realizzazione di nuovi materiali nano strutturati e a base grafene, dotati di proprietà elettriche, elettromagnetiche, elettromeccaniche controllate. In particolare la presente invenzione riguarda la formulazione e l’ottenimento di una vernice polimerica a base acquosa, che presenta proprietà elettriche ovvero piezoresistive ovvero elettromagnetiche controllate, partendo da una vernice polimerica a base acquosa commerciale ovvero da una soluzione liquida polimerica a base acquosa caricata con nanoplacchette di grafene (GNP), ottenute mediante esfoliazione di grafite espansa. Tale vernice è utilizzabile in applicazioni di schermatura elettromagnetica (ad esempio per la realizzazione di materiali con proprietà radar assorbenti (RAM)) ovvero per la realizzazione di dispositivi antistatici o di rivestimenti piezoresistivi per il monitoraggio distribuito dello stato di deformazione di una struttura. Oltre alle suddette caratteristiche elettriche, piezoresistive ed elettromagnetiche, i rivestimenti così ottenuti risultano leggeri, facilmente lavorabili, e adatti per essere deposti su qualsiasi substrato

Electromagnetic modelling of vertical carbon nanotube interconnects

In this paper, we utilize frequency-dependant complex conductivity of metallic single wall CNTs (SWNT) and within the classical Maxwellian formulation numerically solve for several CNT interconnects. The analysis with commercial software tools based on the method of moments (MoM) and finite element method (FEM) is thoroughly validated and used for extracting the S-parameters of half-wavelength dipole pair, atomic layer deposition (ALD) enabled nano-coaxial, Sommerfeld's and Goubau's transmission lines