Long-term cerebral thromboembolic complications of transapical endocardial resynchronization therapy

Purpose: Cardiac resynchronization therapy (CRT) is an established therapeutic option in selected heart failure patients (pts). However, the transvenous left ventricular (LV) lead implantation remains ineffectual in a considerable number of pts. Transapical LV (TALV) lead implantation is an alternative minimally invasive, surgical, endocardial implantation technique. The aim of the present prospective study is to determine the long-term outcome, including the cerebral thromboembolic complications, of pts

Contact feedback improves 1-year outcomes of remote magnetic navigation-guided ischemic ventricular tachycardia ablation

Introduction: Remote magnetic navigation (RMN)-guided catheter ablation (CA) is a feasible treatment option for patients presenting with ischemic ventricular tachycardia (VT). Catheter-tissue contact feedback, enhances lesion formation and may consequently improve CA outcomes. Until recently, contact feedback was unavailable for RMN-guided CA. The novel e-Contact Module (ECM) was developed to continuously monitor and ensure catheter-tissue contact during RMN-guided CA. Objective: The present study aims to evaluate the effect of ECM implementation on acute and long-term outcomes in RMN-guided ischemic VT ablation. Method: This retrospective, two-center study included consecutive ischemic VT patients undergoing RMN-guided CA from 2010 to 2017. Baseline clinical data, procedural data, including radiation times, and acute success rates were compared between CA procedures performed with ECM (ECM+) and without ECM (ECM−). One-year VT-free survival was analyzed using Cox-proportional hazards models, adjusting for potential confounders: age, left ventricular function, VT inducibility at baseli

Cellular expression and function of naturally occurring variants of the human ABCG2 multidrug transporter

The human ABCG2 multidrug transporter plays a crucial role in the absorption and excretion of xeno- and endobiotics; thus the relatively frequent polymorphic and mutant ABCG2 variants in the population may significantly alter disease conditions and pharmacological effects. Low-level or non-functional ABCG2 expression may increase individual drug toxicity, reduce cancer drug resistance, and result in hyperuricemia and gout. In the present work we have studied the cellular expression, trafficking, and function of nine naturally occurring polymorphic and mutant variants of ABCG2. A comprehensive analysis of the membrane localization, transport, and ATPase activity, as well as retention and degradation in intracellular compartments was performed. Among the examined variants, R147W and R383C showed expression and/or protein folding defects, indicating that they could indeed contribute to ABCG2 functional deficiency. These studies and the applied methods should significantly promote the exploration of the medical effects of these personal variants, promote potential therapies, and help to elucidate the specific role of the affected regions in the folding and function of the ABCG2 protein. © 2019, The Author(s)

The impact of preoperative anxiety and education level on long-term mortality after cardiac surgery

<p>Abstract</p> <p>Background</p> <p>Psychosocial factors have shown independent predictive value in the development of cardiovascular diseases. Although there is strong evidence to support the role of psychosocial factors in cardiovascular mortality, there is a scarcity of knowledge about how these factors are related. Therefore, we investigated the relationship between depression, anxiety, education, social isolation and mortality 7.5 years after cardiac surgery.</p> <p>Methods</p> <p>After informed consent, 180 patients undergoing cardiac surgery between July 2000 and May 2001 were prospectively enrolled and followed for ten years. During the follow-up period, the patients were contacted annually by mail. Anxiety (Spielberger State-Trait Anxiety Inventory, STAI-S/STAI-T), depression (Beck Depression Inventory, BDI) and the number and reason for rehospitalizations were assessed each year. Those patients who did not respond were contacted by telephone, and national registries were searched for deaths.</p> <p>Results</p> <p>During a median follow-up of 7.6 years (25^th to 75^th percentile, 7.4 to 8.1 years), the mortality rate was 23.6% (95% confidence interval [CI] 17.3-29.9; 42 deaths). In a Cox regression model, the risk factors associated with an increased risk of mortality were a higher EUROSCORE (points; Adjusted Hazard Ratio (AHR):1.30, 95%CI:1.07-1.58)), a higher preoperative STAI-T score (points; AHR:1.06, 95%CI 1.02-1.09), lower education level (school years; AHR:0.86, 95%CI:0.74-0.98), and the occurrence of major adverse cardiac and cerebral events during follow up (AHR:7.24, 95%CI:2.65-19.7). In the postdischarge model, the same risk factors remained.</p> <p>Conclusions</p> <p>Our results suggest that the assessment of psychosocial factors, particularly anxiety and education may help identify patients at an increased risk for long-term mortality after cardiac surgery.</p

Recurrent Scedosporium apiospermum mycetoma successfully treated by surgical excision and terbinafine treatment: a case report and review of the literature

Background: Scedosporium apiospermum is an emerging opportunistic filamentous fungus, which is notorious for its high levels of antifungal ‑resistance. It is able to cause localized cutaneous or subcutaneous infections in both immu‑ nocompromised and immunocompetent persons, pulmonary infections in patients with predisposing pulmonary diseases and invasive mycoses in immunocompromised patients. Subcutaneous infections caused by this fungus frequently show chronic mycetomatous manifestation. Case report: We report the case of a 70 ‑year ‑old immunocompromised man, who developed a fungal mycetoma‑ tous infection on his right leg. There was no history of trauma; the aetiological agent was identified by microscopic examination and ITS sequencing. This is the second reported case of S. apiospermum subcutaneous infections in Hungary, which was successfully treated by surgical excision and terbinafine treatment. After 7 months, the patient remained asymptomatic. Considering the antifungal susceptibility and increasing incidence of the fungus, Sce - dosporium related subcutaneous infections reported in the past quarter of century in European countries were also reviewed. Conclusions: Corticosteroid treatment represents a serious risk factor of S. apiospermum infections, especially if the patient get in touch with manure ‑enriched or polluted soil or water. Such infections have emerged several times in European countries in the past decades. The presented data suggest that besides the commonly applied voricona‑ zole, terbinafine may be an alternative for the therapy of mycetomatous Scedosporium infections

Anti-diabetic effect of a preparation of vitamins, minerals and trace elements in diabetic rats: a gender difference

BACKGROUND: Although multivitamin products are widely used as dietary supplements to maintain health or as special medical food in certain diseases, the effects of these products were not investigated in diabetes mellitus, a major cardiovascular risk factor. Therefore, here we investigated if a preparation of different minerals, vitamins, and trace elements (MVT) for human use affects the severity of experimental diabetes. METHODS: Two days old neonatal Wistar rats from both genders were injected with 100 mg/kg of streptozotocin or its vehicle to induce diabetes. At week 4, rats were fed with an MVT preparation or vehicle for 8 weeks. Well established diagnostic parameters of diabetes, i.e. fasting blood glucose and oral glucose tolerance test were performed at week 4, 8 and 12. Moreover, serum insulin and blood HbA1c were measured at week 12. RESULTS: An impaired glucose tolerance has been found in streptozotocin-treated rats in both genders at week 4. In males, fasting blood glucose and HbA1c were significantly increased and glucose tolerance and serum insulin was decreased at week 12 in the vehicle-treated diabetic group as compared to the vehicle-treated non-diabetic group. All of the diagnostic parameters of diabetes were significantly improved by MVT treatment in male rats. In females, streptozotocin treatment resulted in a less severe prediabetic-like phenotype as only glucose tolerance and HbA1c were altered by the end of the study in the vehicle-treated diabetic group as compared to the vehicle-treated non-diabetic group. MVT treatment failed to improve the diagnostic parameters of diabetes in female streptozotocin-treated rats. CONCLUSION: This is the first demonstration that MVT significantly attenuates the progression of diabetes in male rats with chronic experimental diabetes. Moreover, we have confirmed that females are less sensitive to STZ-induced diabetes and MVT preparation did not show protection against prediabetic state. This may suggest a gender difference in the pathogenesis of diabetes

Microstructure Effects on Anodizing High-Silicon Aluminium Alloy AlSi12Cu1(Fe) under Various Surface Conditions and Power Modes

This study investigates the impact of the surface characteristics and the inner close-to-surface characteristics of die-cast Al-Si-Cu alloy on the anodizing process under steady-state voltage and current modes. Samples of industrial-pressure die-cast aluminium–silicon alloy AlSi12Cu1(Fe) underwent anodization in as-die-cast surface conditions and after surface-grinding operations with material removal of 0.1, 0.5, and 1 mm. After surface grinding operations, the anodic layer thickness was significantly greater when subjected to a steady-state voltage of 35 V compared to that formed under a steady-state voltage of 20 V, showing an increase in the range of 2 to 2.5 times more than the thickness at 20 V. Additionally, anodizing under steady-state current mode (1.6 A·dm−2) yielded thicker layers compared to steady-state voltage mode (35 V, 1.6 A·dm−2 max) across all surface states (as-cast, ground). SEM-EDS analysis with element mapping revealed the subsequent effects of element distribution on anodic layer growth and structure. Grinding prior to anodization resulted in larger cavity sizes and lengths, attributed to microstructural variations induced by grinding. Grinding also exposed areas with slower solidification rates, fostering a homogeneous Al phase that facilitated enhanced oxide growth. Moreover, the formation of oxide was directly correlated with the presence of alloying elements, particularly silicon particles, which influenced the presence of the unanodized aluminium regions

Characterization of Hot-Dip Aluminized C45 Carbon Steel before and after Cyclic Heating in Air

An experimental study has been carried out on the surface characteristics of hot-dip aluminized (HDA) C45 carbon steel. The coated specimens were also tested thrice by cycling heat between the ambient temperature and 700°C inside an electrical resistance furnace. Both the as-coated and the oxidized samples were analyzed by scanning electron microscopy, energy dispersive spectrometry, and elemental mapping. Microstructural features and other important characteristics (compositional changes, chemical elemental distributions, growth of the intermetallic phases, the formation of micro-voids, etc.) were investigated. Under the high temperature tested conditions, the HDA coated C45 carbon steel close-to-surface top-layer almost entirely converted to iron-aluminum intermetallics, with Fe to Al atomic ratios of 1 to 2 corresponding to the phases FeAl and FeAl2. However, the innermost intermetallic phase (FeAl) formed between the finger-like structure and the steel substrate appeared quite compact and sound (without voids, micro-crack, and internal iron oxide scale), which is a convincing sign and an experimental proof of a high chemical and mechanical stability of such type of surface coatings. The results confirm that even inexpensive carbon steel, if properly aluminized, can provide sufficient protection against excessive oxide scale formation in the air at high temperatures