2,597 research outputs found
Large tunable photonic band gaps in nanostructured doped semiconductors
A plasmonic nanostructure conceived with periodic layers of a doped
semiconductor and passive semiconductor is shown to generate spontaneously
surface plasmon polaritons thanks to its periodic nature. The nanostructure is
demonstrated to behave as an effective material modeled by a simple dielectric
function of ionic-crystal type, and possesses a fully tunable photonic band
gap, with widths exceeding 50%, in the region extending from mid-infra-red to
Tera-Hertz.Comment: 6 pages, 4 figures, publishe
Spin-Exchange Interaction in ZnO-based Quantum Wells
Wurtzitic ZnO/(Zn,Mg)O quantum wells grown along the (0001) direction permit
unprecedented tunability of the short-range spin exchange interaction. In the
context of large exciton binding energies and electron-hole exchange
interaction in ZnO, this tunability results from the competition between
quantum confinement and giant quantum confined Stark effect. By using
time-resolved photoluminescence we identify, for well widths under 3 nm, the
redistribution of oscillator strengths between the A and B excitonic
transitions, due to the enhancement of the exchange interaction. Conversely,
for wider wells, the redistribution is cancelled by the dominant effect of
internal electric fields, which dramatically reduce the exchange energy.Comment: 14 pages, 3 figure
Large tunable photonic band gaps in nanostructured doped semiconductors
A plasmonic nanostructure conceived with periodic layers of a doped
semiconductor and passive semiconductor is shown to generate spontaneously
surface plasmon polaritons thanks to its periodic nature. The nanostructure is
demonstrated to behave as an effective material modeled by a simple dielectric
function of ionic-crystal type, and possesses a fully tunable photonic band
gap, with widths exceeding 50%, in the region extending from mid-infra-red to
Tera-Hertz.Comment: 6 pages, 4 figures, publishe
Polarized emission of GaN/AlN quantum dots : single dot spectroscopy and symmetry-based theory
We report micro-photoluminescence studies of single GaN/AlN quantum dots
grown along the (0001) crystal axis by molecular beam epitaxy on Si(111)
substrates. The emission lines exhibit a linear polarization along the growth
plane, but with varying magnitudes of the polarization degree and with
principal polarization axes that do not necessarily correspond to
crystallographic directions. Moreover, we could not observe any splitting of
polarized emission lines, at least within the spectral resolution of our setup
(1 meV). We propose a model based on the joint effects of electron-hole
exchange interaction and in-plane anisotropy of strain and/or quantum dot
shape, in order to explain the quantitative differences between our
observations and those previously reported on, e.g. CdTe- or InAs-based quantum
dots
Binding Energy of Charged Excitons in ZnSe-based Quantum Wells
Excitons and charged excitons (trions) are investigated in ZnSe-based quantum
well structures with (Zn,Be,Mg)Se and (Zn,Mg)(S,Se) barriers by means of
magneto-optical spectroscopy. Binding energies of negatively () and positively
(X+) charged excitons are measured as functions of quantum well width, free
carrier density and in external magnetic fields up to 47 T. The binding energy
of shows a strong increase from 1.4 to 8.9 meV with decreasing quantum well
width from 190 to 29 A. The binding energies of X+ are about 25% smaller than
the binding energy in the same structures. The magnetic field behavior of and
X+ binding energies differ qualitatively. With growing magnetic field strength,
increases its binding energy by 35-150%, while for X+ it decreases by 25%.
Zeeman spin splittings and oscillator strengths of excitons and trions are
measured and discussed
Measuring the capability to raise revenue process and output dimensions and their application to the Zambia revenue authority
The worldwide diffusion of the good governance agenda and new public management has triggered a renewed focus on state capability and, more specifically, on the capability to raise revenue in developing countries. However, the analytical tools for a comprehensive understanding of the capability to raise revenue remain underdeveloped. This article aims at filling this gap and presents a model consisting of the three process dimensions ‘information collection and processing’, ‘merit orientation’ and ‘administrative accountability’. ‘Revenue performance’ constitutes the fourth capability dimension which assesses tax administration’s output. This model is applied to the case of the Zambia Revenue Authority. The dimensions prove to be valuable not only for assessing the how much but also the how of collecting taxes. They can be a useful tool for future comparative analyses of tax administrations’ capabilities in developing countries.Die weltweite Verbreitung der Good-Governance- und New-Public-Management-Konzepte hat zu einer zunehmenden Konzentration auf staatliche Leistungsfähigkeit und, im Besonderen, auf die Leistungsfähigkeit der Steuererhebung in Entwicklungsländern geführt. Allerdings bleiben die analytischen Werkzeuge für ein umfassendes Verständnis von Leistungsfähigkeit unterentwickelt. Dieser Artikel stellt hierfür ein Modell vor, das die drei Prozess-Dimensionen „Sammeln und Verarbeiten von Informationen“, „Leistungsorientierung der Mitarbeiter“ und „Verantwortlichkeit der Verwaltung“ beinhaltet. „Einnahmeperformanz“ ist die vierte Dimension und erfasst den Output der Steuerverwaltung. Das mehrdimensionale Modell wird für die Analyse der Leistungsfähigkeit der Steuerbehörde Zambias (Zambia Revenue Authority) genutzt. Es erweist sich nicht nur für die Untersuchung des Wieviel, sondern auch des Wie des Erhebens von Steuern als wertvoll. Die vier Dimensionen können in Zukunft zur umfassenden und vergleichenden Analyse der Leistungsfähigkeit verschiedener Steuerverwaltungen in Entwicklungsländern genutzt werden
Start of SPIDER operation towards ITER neutral beams
Heating Neutral Beam (HNB) Injectors will constitute the main plasma heating and current drive tool both in ITER and JT60-SA, which are the next major experimental steps for demonstrating nuclear fusion as viable energy source. In ITER, in order to achieve the required thermonuclear fusion power gain Q=10 for short pulse operation and Q=5 for long pulse operation (up to 3600s), two HNB injectors will be needed [1], each delivering a total power of about 16.5 MW into the magnetically-confined plasma, by means of neutral hydrogen or deuterium particles having a specific energy of about 1 MeV. Since only negatively charged particles can be efficiently neutralized at such energy, the ITER HNB injectors [2] will be based on negative ions, generated by caesium-catalysed surface conversion of atoms in a radio-frequency driven plasma source. A negative deuterium ion current of more than 40 A will be extracted, accelerated and focused in a multi-aperture, multi-stage electrostatic accelerator, having 1280 apertures (~ 14 mm diam.) and 5 acceleration stages (~200 kV each) [3]. After passing through a narrow gas-cell neutralizer, the residual ions will be deflected and discarded, whereas the neutralized particles will continue their trajectory through a duct into the tokamak vessels to deliver the required heating power to the ITER plasma for a pulse duration of about 3600 s. Although the operating principles and the implementation of the most critical parts of the injector have been tested in different experiments, the ITER NBI requirements have never been simultaneously attained. In order to reduce the risks and to optimize the design and operating procedures of the HNB for ITER, a dedicated Neutral Beam Test Facility (NBTF) [4] has been promoted by the ITER Organization with the contribution of the European Union\u2019s Joint Undertaking for ITER and of the Italian Government, with the participation of the Japanese and Indian Domestic Agencies (JADA and INDA) and of several European laboratories, such as IPP-Garching, KIT-Karlsruhe, CCFE-Culham, CEA-Cadarache. The NBTF, nicknamed PRIMA, has been set up at Consorzio RFX in Padova, Italy [5]. The planned experiments will verify continuous HNB operation for one hour, under stringent requirements for beam divergence (< 7 mrad) and aiming (within 2 mrad). To study and optimise HNB performances, the NBTF includes two experiments: MITICA, full-scale NBI prototype with 1 MeV particle energy and SPIDER, with 100 keV particle energy and 40 A current, aiming at testing and optimizing the full-scale ion source. SPIDER will focus on source uniformity, negative ion current density and beam optics. In June 2018 the experimental operation of SPIDER has started
Shared probe design and existing microarray reanalysis using PICKY
<p>Abstract</p> <p>Background</p> <p>Large genomes contain families of highly similar genes that cannot be individually identified by microarray probes. This limitation is due to thermodynamic restrictions and cannot be resolved by any computational method. Since gene annotations are updated more frequently than microarrays, another common issue facing microarray users is that existing microarrays must be routinely reanalyzed to determine probes that are still useful with respect to the updated annotations.</p> <p>Results</p> <p><smcaps>PICKY</smcaps> 2.0 can design shared probes for sets of genes that cannot be individually identified using unique probes. <smcaps>PICKY</smcaps> 2.0 uses novel algorithms to track sharable regions among genes and to strictly distinguish them from other highly similar but nontarget regions during thermodynamic comparisons. Therefore, <smcaps>PICKY</smcaps> does not sacrifice the quality of shared probes when choosing them. The latest <smcaps>PICKY</smcaps> 2.1 includes the new capability to reanalyze existing microarray probes against updated gene sets to determine probes that are still valid to use. In addition, more precise nonlinear salt effect estimates and other improvements are added, making <smcaps>PICKY</smcaps> 2.1 more versatile to microarray users.</p> <p>Conclusions</p> <p>Shared probes allow expressed gene family members to be detected; this capability is generally more desirable than not knowing anything about these genes. Shared probes also enable the design of cross-genome microarrays, which facilitate multiple species identification in environmental samples. The new nonlinear salt effect calculation significantly increases the precision of probes at a lower buffer salt concentration, and the probe reanalysis function improves existing microarray result interpretations.</p
- …