Prevalencia de terceros molares mandibulares impactados y su asociación con caries distales en segundos molares mandibulares mediante tomografía computarizada de haz cónico.

This study evaluated the prevalence and eruption’s pattern of impacted mandibular third molars (IMTM) and the influence of their eruption status on the distal caries of mandibular second molars (MSM) using cone-beam computed tomography (CBCT). Material and methods: CBCT images taken for different purposes in private dental practices were analyzed retrospectively. Radiographic assessment included: prevalence of IMTM, degree of angulation, level of impaction and type of IMTM. Furthermore, the distance between the cement-enamel junctions (CEJ) of second and third molars and the occurrence of caries lesion on the distal surface of MSM was also evaluated. Data were analyzed by chi square test and logistic regression was used to find the association between distal caries of MSM and eruption status of IMTM. Results: Three hundred and eight CBCTs were screened, the prevalence of IMTM was 36.88% and their angulation degree were mostly less than 90º (mesioangular). Amongst those with impaction, 58 subjects (43%) had distal caries on MSM, 29.6% in females and 30.4% in the age group 19-27 years. Caries on the distal side of MSM were significantly associated with age, level and type of impaction, angulation degree and CEJ distances (p<0.05). Conclusions: The prevalence of IMTM is high (36.88%) and there are significant relationships between angulation degree, level and type of impaction, and CEJ distances with caries on the distal side of MSM.Introducción: Este estudio evaluó la prevalencia y el patrón de erupción de terceros molares mandibulares impactados (TMMI), y la influencia de su estado de erupción en la caries distal de los segundos molares mandibulares (SMM) mediante tomografía computarizada de haz cónico (TCHC).  Material y métodos: se analizaron retrospectivamente las imágenes de TCHC tomadas para diferentes fines en prácticas dentales privadas. La evaluación radiográfica incluyó: prevalencia de TMMI, grado de angulación, nivel de impacto y tipo de TMMI. Además, también se evaluó la distancia entre la unión amelocementaria (UAC) de los segundos y terceros molares y la aparición de lesión de caries en la superficie distal de SMM. Los datos se analizaron mediante la prueba de chi cuadrado y se usó la regresión logística para evaluar asociaciones entre la caries distal de SMM y el estado de erupción de TMMI. Resultados: Se examinaron 308 TCHC, la prevalencia de TMMI fue de 36.88% y su grado de angulación fue mayoritariamente menor a 90º (mesioangular). Entre aquellos con impacto, 58 sujetos (43%) tenían caries distales en los SMM, 29.6% eran mujeres y 30.4% pertenecieron al grupo de edad de 19-27 años. Las caries en el lado distal de MSM se asociaron significativamente con la edad, el nivel y el tipo de impactación, el grado de angulación y las distancias UAC (p<0.05). Conclusiones: la prevalencia de TMMI es alta (36.88%) y existen relaciones significativas entre el grado de angulación, el nivel y el tipo de impacto, y las distancias UAC con presencia de caries en el lado distal de los SMM

Bioactivity and Physicochemical Properties of Three Calcium Silicate-Based Cements: An In Vitro Study

Objective. This study evaluated the bioactivity and physicochemical properties of three commercial calcium silicate-based endodontic materials (MTA, EndoSequence Root Repair Material putty, and Biodentine™). Material and Methods. Horizontal sections of 3 mm thickness from 18 root canals of human teeth were subjected to biomechanical preparation with WaveOne Gold large rotary instruments. The twelve specimens were filled with three tested materials (MM-MTA, EndoSequence Root Repair Material putty, and Biodentine™) and immersed in phosphate-buffered saline for 7 and 30 days. After this period of time, each specimen of each material was processed for morphological observation, surface precipitates, and interfacial dentin using SEM. In addition, the surface morphology of the set materials, without soaking in phosphate-buffered solution after one day and after 28 days stored in phosphate-buffered saline, was evaluated using SEM; also, the pH of the soaking water and the amount of calcium ions released from the test materials were measured by using an inductively coupled plasma-optical emission spectroscopy test. Data obtained were analyzed using one-way analysis of variance and Tukey’s honest significant difference test with a significance level of 5%. Result. The formation of precipitates was observed on the surfaces of all materials at 1 week and increased substantially over time. Interfacial layers in some areas of the dentin-cement interface were found from one week of immersion. All the analyzed materials showed alkaline pH and capacity to release calcium ions; however, the concentrations of released calcium ions were significantly more in Biodentine and ESRRM putty than MM-MTA (P<0.05). ESRRM putty maintained a pH of around 11 after 28 days. Conclusion. Compared with MM-MTA, Biodentine and ESRRM putty showed significantly more calcium ion release. However, exposure of three tested cements to phosphate-buffered solution resulted in precipitation of apatite crystalline structures over both cement and dentin that increased over time. This suggests that the tested materials are bioactive

The Response of the Pulp-Dentine Complex, PDL, and Bone to Three Calcium Silicate-Based Cements: A Histological Study in an Animal Rat Model

Objective. The aim of this study was to histologically examine the tissue reaction of three different calcium silicate cements in the closure of perforations in rat incisor teeth. Material and Methods. An experimental lateral root perforation with pulp exposure was performed in 32 lower incisors of 16 male Wistar albino rats. They were randomly assigned into three test groups (each including eight teeth) that were filled either by Biodentine (BD) or MicroMega mineral trioxide aggregate (MM-MTA) or EndoSequence root repair material putty (ESRRM putty), besides eight unperforated incisors from the other four rats (control group). The inflammatory response and healing process were evaluated histologically and scored after one and four weeks. Differences among groups were tested by Kruskal–Wallis tests at P≤0.05. Results. In the first week, BD produced more inflammatory response in the pulpal (score 3) than other materials (score 2). Only ESRRM putty showed odontoblast-like cells in 50%, 25% dentine-like deposit, 25% evidence of bone deposition in the drilling site (score 2), and minimum periodontal ligament (PDL) necrosis and disorganization (25%, score 2). After one month, all groups had healthy pulpal tissue, but 25% of ESRRM putty retained score 1 inflammatory response, and 50% of the BD case had an incomplete palisading odontoblast layer (score 3). A thick and regular dentine bridge deposition was seen in the ESRRM putty group in comparison with MM-MTA and BD cases. The cortical plate healing in all ESRRM putty samples was complete (score 3), while an incomplete closure was seen in MM-MTA and BD groups (score 2). Both the MM-MTA and ESRRM putty groups had fully organized PDL (score 2), while in 50% of BD cases, a necrotizing area and disorganized PDL with inflammatory cells infiltration were still present. Statistically significant differences in the scores of any histologic parameters among the three tested materials were observed neither in the 1st nor in the 4th weeks of the experimental period. Conclusion. Better tissue compatibility and repair of pulpal and periodontal tissue have been detected after lateral perforation in the root of rat incisors when treated with ESRRM putty than MM-MTA and BD. However, the difference was not significant

Age and sex related change in tooth enamel thickness of maxillary incisors measured by cone beam computed tomography

Abstract Background To measure adequate enamel thickness of maxillary incisors in planning enamel reduction for a porcelain laminate veneer restoration in relation to chronological age and sex by using cone beam computed tomography (CBCT) in an Iraqi subpopulation. Methods From 81 CBCT images, 324 maxillary incisors were examined. Enamel thickness was measured at both mesial and distal regions of the tooth in three different levels: cervical, middle, and incisal (occlusal) 1/3 at a sagittal section. Measurements were made for the following tooth areas using CBCT: facial enamel thickness at 1, 3, and 5 mm from the cementoenamel junction (CEJ), palatal enamel thickness at 5 mm from the CEJ (5 mm P), facial and palatal enamel thickness at the incisal edge (IFP), mid incisal enamel thickness (IET), and the incisal edge enamel-pulp distance (IEPD). Relationships of enamel thickness with age and sex were evaluated using Independent t-test, Mann–Whitney U-test and the Pearson correlation coefficient, a simple linear regression analysis used for statistical analysis. Results Significant differences (P < 0.05) were found in terms of an inverse association between enamel thickness and chronological age at all measurements above the CEJ and the regression model for the mid-incisal enamel thickness was (R2 of 0.4). In contrast, there was an increase in IFP, palatal, and IPED enamel thickness with age. Also, significant differences were found in enamel thickness between males and females, the enamel being thicker in females in relation to facial enamel thickness, enamel palatal thickness above CEJ and IET, while for IEPD, the enamel thickness was greater in males compared to females. Conclusion The measurements for enamel thickness outcome variables in relation to chronological age revealed significant differences for each measured distance and there were statistically significant differences in enamel thickness between males and females at all measurements except at IFP. These results demonstrate that CBCT can be used for noninvasive, accurate measurements of enamel thickness in both sex

Prevalence of impacted mandibular third molars and its association with distal caries in mandibular second molars using cone beam computed tomography.

This study evaluated the prevalence and eruption’s pattern of impacted mandibular third molars (IMTM) and the influence of their eruption status on the distal caries of mandibular second molars (MSM) using cone-beam computed tomography (CBCT). Material and methods: CBCT images taken for different purposes in private dental practices were analyzed retrospectively. Radiographic assessment included: prevalence of IMTM, degree of angulation, level of impaction and type of IMTM. Furthermore, the distance between the cement-enamel junctions (CEJ) of second and third molars and the occurrence of caries lesion on the distal surface of MSM was also evaluated. Data were analyzed by chi square test and logistic regression was used to find the association between distal caries of MSM and eruption status of IMTM. Results: Three hundred and eight CBCTs were screened, the prevalence of IMTM was 36.88% and their angulation degree were mostly less than 90º (mesioangular). Amongst those with impaction, 58 subjects (43%) had distal caries on MSM, 29.6% in females and 30.4% in the age group 19-27 years. Caries on the distal side of MSM were significantly associated with age, level and type of impaction, angulation degree and CEJ distances (p<0.05). Conclusions: The prevalence of IMTM is high (36.88%) and there are significant relationships between angulation degree, level and type of impaction, and CEJ distances with caries on the distal side of MSM.Este estudio evaluó la prevalencia y el patrón de erupción de terceros molares mandibulares impactados (TMMI), y la influencia de su estado de erupción en la caries distal de los segundos molares mandibulares (SMM) mediante tomografía computarizada de haz cónico (TCHC). Material y métodos: se analizaron retrospectivamente las imágenes de TCHC tomadas para diferentes fines en prácticas dentales privadas. La evaluación radiográfica incluyó: prevalencia de TMMI, grado de angulación, nivel de impacto y tipo de TMMI. Además, también se evaluó la distancia entre la unión amelocementaria (UAC) de los segundos y terceros molares y la aparición de lesión de caries en la superficie distal de SMM. Los datos se analizaron mediante la prueba de chi cuadrado y se usó la regresión logística para evaluar asociaciones entre la caries distal de SMM y el estado de erupción de TMMI. Resultados: Se examinaron 308 TCHC, la prevalencia de TMMI fue de 36.88% y su grado de angulación fue mayoritariamente menor a 90º (mesioangular). Entre aquellos con impacto, 58 sujetos (43%) tenían caries distales en los SMM, 29.6% eran mujeres y 30.4% pertenecieron al grupo de edad de 19-27 años. Las caries en el lado distal de MSM se asociaron significativamente con la edad, el nivel y el tipo de impactación, el grado de angulación y las distancias UAC (p<0.05). Conclusiones: la prevalencia de TMMI es alta (36.88%) y existen relaciones significativas entre el grado de angulación, el nivel y el tipo de impacto, y las distancias UAC con presencia de caries en el lado distal de los SMM