17 research outputs found
Electroreduction of CO2/CO to C2 products: process modeling, downstream separation, system integration, and economic analysis.
Direct electrochemical reduction of CO2 to C2 products such as ethylene is more efficient in alkaline media, but it suffers from parasitic loss of reactants due to (bi)carbonate formation. A two-step process where the CO2 is first electrochemically reduced to CO and subsequently converted to desired C2 products has the potential to overcome the limitations posed by direct CO2 electroreduction. In this study, we investigated the technical and economic feasibility of the direct and indirect CO2 conversion routes to C2 products. For the indirect route, CO2 to CO conversion in a high temperature solid oxide electrolysis cell (SOEC) or a low temperature electrolyzer has been considered. The product distribution, conversion, selectivities, current densities, and cell potentials are different for both CO2 conversion routes, which affects the downstream processing and the economics. A detailed process design and techno-economic analysis of both CO2 conversion pathways are presented, which includes CO2 capture, CO2 (and CO) conversion, CO2 (and CO) recycling, and product separation. Our economic analysis shows that both conversion routes are not profitable under the base case scenario, but the economics can be improved significantly by reducing the cell voltage, the capital cost of the electrolyzers, and the electricity price. For both routes, a cell voltage of 2.5 V, a capital cost of 20/MWh will yield a positive net present value and payback times of less than 15 years. Overall, the high temperature (SOEC-based) two-step conversion process has a greater potential for scale-up than the direct electrochemical conversion route. Strategies for integrating the electrochemical CO2/CO conversion process into the existing gas and oil infrastructure are outlined. Current barriers for industrialization of CO2 electrolyzers and possible solutions are discussed as well
High pressure electrochemical reduction of CO2 to formic acid/formate: a comparison between bipolar membranes and cation exchange membranes
A high pressure semicontinuous batch electrolyzer is used to convert CO2 to formic acid/formate on a tin-based cathode using bipolar membranes (BPMs) and cation exchange membranes (CEMs). The effects of CO2 pressure up to 50 bar, electrolyte concentration, flow rate, cell potential, and the two types of membranes on the current density (CD) and Faraday efficiency (FE) for formic acid/formate are investigated. Increasing the CO2 pressure yields a high FE up to 90% at a cell potential of 3.5 V and a CD of ∼30 mA/cm2. The FE decreases significantly at higher cell potentials and current densities, and lower pressures. Up to 2 wt % formate was produced at a cell potential of 4 V, a CD of ∼100 mA/cm2, and a FE of 65%. The advantages and disadvantages of using BPMs and CEMs in electrochemical cells for CO2 conversion to formic acid/formate are discussed
High-pressure electrochemical reduction of CO2 to formic acid/formate: effect of pH on the downstream separation process and economics
We use a high-pressure semicontinuous batch electrochemical reactor with a tin-based cathode to demonstrate that it is possible to efficiently convert CO2 to formic acid (FA) in low-pH (i.e., pH < pKa) electrolyte solutions. The effects of CO2 pressure (up to 50 bar), bipolar membranes, and electrolyte (K2SO4) concentration on the current density (CD) and the Faraday efficiency (FE) of formic acid were investigated. The highest FE (∼80%) of FA was achieved at a pressure of around 50 bar at a cell potential of 3.5 V and a CD of ∼30 mA/cm2. To suppress the hydrogen evolution reaction (HER), the electrochemical reduction of CO2 in aqueous media is typically performed at alkaline conditions. The consequence of this is that products like formic acid, which has a pKa of 3.75, will almost completely dissociate into the formate form. The pH of the electrolyte solution has a strong influence not only on the electrochemical reduction process of CO2 but also on the downstream separation of (dilute) acid products like formic acid. The selection of separation processes depends on the dissociation state of the acids. A review of separation technologies for formic acid/formate removal from aqueous dilute streams is provided. By applying common separation heuristics, we have selected liquid–liquid extraction and electrodialysis for formic acid and formate separation, respectively. An economic evaluation of both separation processes shows that the formic acid route is more attractive than the formate one. These results urge for a better design of (1) CO2 electrocatalysts that can operate at low pH without affecting the selectivity of the desired products and (2) technologies for efficient separation of dilute products from (photo)electrochemical reactors
Using molecular dynamics to obtain Maxwell-Stefan diffusion coefficients in liquid systems
Enhancing the water capacity in Zr-based metal-organic framework for heat pump and atmospheric water generator applications
\u3cp\u3eAccording to the European Commission, in 2016 the residential sector represented 25.4% of the final energy consumption. Heating and cooling in EU households account for 69.1% of the total energy consumption. The fraction of 84% for heating and cooling is still generated from fossil fuels, and only 16% is generated from renewable energy. To decrease carbon dioxide emissions of fossil fuel consumption, it is crucial to find alternatives to supply the heating and cooling demand. Alternatives such as adsorption-based heat pumps and desiccant cooling systems are receiving much attention because of their moderate energy consumption. These systems are based on the energetic exchange during the adsorption/desorption of working fluids. In this work, we combined experiments and simulations to evaluate the viability of several zeolites and MOFs with water for cooling systems applications. We combined the study of adsorption mechanisms and the dynamics of water inside the pores of the structures, thereby obtaining an overall understanding of the working pair. We found that the Al content in FAU-topology zeolites is a key factor for an efficient process. We also identify ZJNU-30 metal-organic framework as a suitable candidate for cooling applications because of its outstanding water capacity, cooling capacity, and coefficient of performance.\u3c/p\u3
Hydride transfer versus deprotonation kinetics in the isobutane-propene alkylation reaction:a computational study
The alkylation of isobutane with light alkenes plays an essential role in modern petrochemical processes for the production of high-octane gasoline. In this study we have employed periodic DFT calculations combined with microkinetic simulations to investigate the complex reaction mechanism of isobutane–propene alkylation catalyzed by zeolitic solid acids. Particular emphasis was given to addressing the selectivity of the alkylate formation versus alkene formation, which requires a high rate of hydride transfer in comparison to the competitive oligomerization and deprotonation reactions resulting in catalyst deactivation. Our calculations reveal that hydride transfer from isobutane to a carbenium ion occurs via a concerted C–C bond formation between a tert-butyl fragment and an additional olefin, or via deprotonation of the tert-butyl fragment to generate isobutene. A combination of high isobutane concentration and low propene concentration at the reaction center favor the selective alkylation. The key reaction step that has to be suppressed to increase the catalyst lifetime is the deprotonation of carbenium intermediates that are part of the hydride transfer reaction cycle
On the inner workings of Monte Carlo codes
We review state-of-the-art Monte Carlo (MC) techniques for computing fluid coexistence properties (Gibbs simulations) and adsorption simulations in nanoporous materials such as zeolites and metal-organic frameworks. Conventional MC is discussed and compared to advanced techniques such as reactive MC, configurational-bias Monte Carlo and continuous fractional MC. The latter technique overcomes the problem of low insertion probabilities in open systems. Other modern methods are (hyper-)parallel tempering, Wang-Landau sampling and nested sampling. Details on the techniques and acceptance rules as well as to what systems these techniques can be applied are provided. We highlight consistency tests to help validate and debug MC codes
Effect of adsorbate loading on selectivity during adsorption of C 14 /C 15 and C 15 /C 16 n-alkane binary mixtures in silicalite
Towards a molecular understanding of shape selectivity
Shape selectivity is a simple concept: the transformation of reactants into products depends on how the processed molecules fit the active site of the catalyst. Nature makes abundant use of this concept, in that enzymes usually process only very few molecules, which fit their active sites. Industry has also exploited shape selectivity in zeolite catalysis for almost 50 years, yet our mechanistic understanding remains rather limited. Here we review shape selectivity in zeolite catalysis, and argue that a simple thermodynamic analysis of the molecules adsorbed inside the zeolite pores can explain which products form and guide the identification of zeolite structures that are particularly suitable for desired catalytic applications