Mobility-Dependence of the Critical Density in Two-Dimensional Systems: An Empirical Relation

For five different electron and hole systems in two dimensions (Si MOSFET's, p-GaAs, p-SiGe, n-GaAs and n-AlAs), the critical density, $n_c$ that marks the onset of strong localization is shown to be a single power-law function of the scattering rate $1/\tau$ deduced from the maximum mobility. The resulting curve defines the boundary separating a localized phase from a phase that exhibits metallic behavior. The critical density $n_c \to 0$ in the limit of infinite mobility.Comment: 2 pages, 1 figur

Isotope shifts of the (3s3p)3^3P0,1,2_{0,1,2} - (3s4s)3^3S1_1 Mg I transitions

We report measurements of the isotope shifts of the (3s3p)$^3$P$_{0,1,2}$ - (3s4s)$^3$S$_1$ Mg I transitions for the stable isotopes $^{24}$Mg (I=0), $^{25}$Mg (I=5/2) and $^{26}$Mg (I=0). Furthermore the $^{25}$Mg $^3$S$_1$ hyperfine coefficient A($^3$S$_1$) = (-321.6 $\pm$ 1.5) MHz is extracted and found to be in excellent agreement with state-of-the-art theoretical predictions giving A($^3$S$_1$) = -325 MHz and B($^3$S$_1$) $\simeq 10^{-5}$ MHz. Compared to previous measurements, the data presented in this work is improved up to a factor of ten.Comment: 4 pages, 4 figures submitted to PR

Critical Behavior of the Conductivity of Si:P at the Metal-Insulator Transition under Uniaxial Stress

We report new measurements of the electrical conductivity sigma of the canonical three-dimensional metal-insulator system Si:P under uniaxial stress S. The zero-temperature extrapolation of sigma(S,T -> 0) ~\S - S_c\^mu shows an unprecidentedly sharp onset of finite conductivity at S_c with an exponent mu = 1. The value of mu differs significantly from that of earlier stress-tuning results. Our data show dynamical sigma(S,T) scaling on both metallic and insulating sides, viz. sigma(S,T) = sigma_c(T) F(\S - S_cT^y) where sigma_c(T) is the conductivity at the critical stress S_c. We find y = 1/znu = 0.34 where nu is the correlation-length exponent and z the dynamic critical exponent.Comment: 5 pages, 4 figure

Nomenclatural standards and genetic certificates for apple-tree cultivars developed at the North Caucasian Federal Scientific Center of Horticulture, Viticulture, wine-making

Background. The development of genetic certificates and nomenclatural standards for newly released cultivars of Malus domestica Borkh. (apple tree) ensures an opportunity to preserve the original and authentic genetic and morphological information on domestic cultivars promising for the south of Russia. The purpose of this study was to develop genetic certificates and nomenclatural standards for 7 apple-tree cultivars developed at the North Caucasian Federal Scientific Center of Horticulture, Viticulture, Wine-making (NCFSCHVW), five of which were released jointly with the All-Russian Research Institute of Fruit Crop Breeding (VNIISPK).Materials and methods. The materials included apple-tree cultivars resistant or immune to scab (Venturia inaequalis (Cooke) G. Winter) from the NCFSCHVW collection stock. Conventional herbarization and DNA fingerprinting methods were used. For cultivar certification, an improved technique of DNA sampling and 12 microsatellite markers were applied.Results. Unique DNA profile certificates and nomenclatural standards were produced for 7 apple-tree cultivars: ‘Vasilisa’, ‘Karmen’, ‘Krasny Yantar’, ‘Soyuz’ and ‘Rassvet’ (with the Rvi6 gene) released jointly by the NCFSCHVW and VNIISPK, plus ‘Zolotoye Letneye’ and ‘Feya’ developed at the NCFSCHVW. The apple-tree herbarium specimens were placed for perpetual storage in the WIR Herbarium of the N.I. Vavilov All-Russian Institute of Plant Genetic Resources (VIR).Conclusion. The results obtained are promising for identification and authenticity verification of new domestic apple-tree cultivars during their reproduction and cultivation

The metal-insulator transition in Si:X: Anomalous response to a magnetic field

The zero-temperature magnetoconductivity of just-metallic Si:P scales with magnetic field, H, and dopant concentration, n, lying on a single universal curve. We note that Si:P, Si:B, and Si:As all have unusually large magnetic field crossover exponents near 2, and suggest that this anomalously weak response to a magnetic field is a common feature of uncompensated doped semiconductors.Comment: 4 pages (including figures

History-dependent relaxation and the energy scale of correlation in the Electron-Glass

We present an experimental study of the energy-relaxation in Anderson-insulating indium-oxide films excited far from equilibrium. In particular, we focus on the effects of history on the relaxation of the excess conductance dG. The natural relaxation law of dG is logarithmic, namely dG=-log(t). This may be observed over more than five decades following, for example, cool-quenching the sample from high temperatures. On the other hand, when the system is excited from a state S_{o} in which it has not fully reached equilibrium to a state S_{n}, the ensuing relaxation law is logarithmic only over time t shorter than the time t_{w} it spent in S_{o}. For times t>t_{w} dG(t) show systematic deviation from the logarithmic dependence. It was previously shown that when the energy imparted to the system in the excitation process is small, this leads to dG=P(t/t_{w}) (simple-aging). Here we test the conjecture that `simple-aging' is related to a symmetry in the relaxation dynamics in S_{o} and S_{n}. This is done by using a new experimental procedure that is more sensitive to deviations in the relaxation dynamics. It is shown that simple-aging may still be obeyed (albeit with a modified P(t/t_{w})) even when the symmetry of relaxation in S_{o} and S_{n} is perturbed by a certain degree. The implications of these findings to the question of aging, and the energy scale associated with correlations are discussed

Легирование расплава подшипников скольжения на основе баббита

Abstract. A device design is proposed that makes it possible to obtain composite castings of sliding bearings based on babbitt by mixing alloying additives from antifriction powders of solid lubricants (graphite, molybdenum disulfide, etc.) into the melt, having a density significantly lower than the density of babbitt itself.  The principle of mixing is based on the use of  numerous turbulent flows resulting from the rotation of a gating rod with a wire pile in the melt material, the packing density coefficient of which is not less than 0.1. Due to the suction effect of these flows, non-metallic particles of solid lubricant powder do not float to the surface of the melt and, after crystallization, remain in the body of the casting. The supply of alloying powder of solid lubricant is carried out simultaneously with the supply of  the babbitt melt through the central and distribution gating channels made in a rotating rod. Under the action of centrifugal forces, powder particles and melt material flow through distribution channels to the walls of the mold (mold), passing through the rotation zone of the metal pile. In this case, intensive mixing of the powder particles with the melt material occurs due to the suction effect of turbulent flows arising behind the moving pile. In addition, as a result of the rotation of the wire pile, dendritic constituents are crushed in babbitt castings.  Metallographic studies of the castings obtained on the developed device have shown that the structure of the casting obtained by traditional technology contains large quantities of solid crystals of intermetallic compounds SnSb and Cu3Sn, while in the structure of the casting obtained using the proposed device, along with the aforementioned intermetallic compounds, particles of solid lubricant C + MoS2 powder embedded in the crystallized melt are observed. Предложена конструкция устройства, обеспечивающего возможность получения композиционных отливок подшипников скольжения на основе баббита путем замешивания в расплав легирующих добавок из антифрикционных порошков твердой смазки (графита, дисульфида молибдена и др.), обладающих плотностью, значительно меньшей по сравнению с плотностью самого баббита. Принцип замешивания основан на использовании многочисленных турбулентных потоков, возникающих вследствие вращения в материале расплава литникового стержня с проволочным ворсом, коэффициент плотности набивки которого не менее 0,1. Благодаря всасывающему воздействию этих потоков неметаллические частицы порошка твердой смазки не всплывают на поверхность расплава и после его кристаллизации остаются в теле отливки. Подача легирующего порошка твердой смазки осуществляется одновременно с подачей расплава баббита через центральный и распределительные литниковые каналы, выполненные во вращающемся стержне. Под действием центробежных сил частицы порошка и материал расплава через распределительные каналы вытекают к стенкам изложницы (формы), проходя через зону вращения металлического ворса. При этом благодаря всасывающему воздействию турбулентных потоков, возникающих за движущимся ворсом, происходит интенсивное смешивание частиц порошка с материалом расплава. Кроме того, в результате вращения проволочного ворса обеспечивается измельчение дендритных составляющих в отливках из баббита. Металлографическими исследованиями полученных на разработанном устройстве отливок установлено, что в структуре отливки, полученной по традиционной технологии, в большом количестве содержатся твердые кристаллы интерметаллидных соединений SnSb и Cu3Sn, в то время как в структуре отливки, полученной с использованием предложенного устройства, наряду с вышеупомянутыми интерметаллидными соединениями, наблюдаются внедренные в закристаллизовавшийся расплав частицы порошка твердой смазки C + MoS2

Threshold Laws for the Break-up of Atomic Particles into Several Charged Fragments

The processes with three or more charged particles in the final state exhibit particular threshold behavior, as inferred by the famous Wannier law for (2e + ion) system. We formulate a general solution which determines the threshold behavior of the cross section for multiple fragmentation. Applications to several systems of particular importance with three, four and five leptons (electrons and positrons) in the field of charged core; and two pairs of identical particles with opposite charges are presented. New threshold exponents for these systems are predicted, while some previously suggested threshold laws are revised.Comment: 40 pages, Revtex, scheduled for the July issue of Phys.Rev.A (1998

Novel materials for solid oxide fuel cells cathodes and oxygen separation membranes: Fundamentals of oxygen transport and performance

In the field of modern hydrogen energy, obtaining pure hydrogen and syngas and then being able to use them for green energy production are significant problems. Developing solid oxide fuel cells (SOFC) and catalytic membranes for oxygen separation as well as materials for these devices is one of the most likely ways to solve these problems. In this work, the authors’ recent studies in this field are reviewed; the fundamentals of developing materials for SOFC cathodes and oxygen separation membranes’ permselective layers based on research of their oxygen mobility and surface reactivity are presented. Ruddlesden – Popper phases Ln2–xCaxNiO4+δ (LnCNO) and perovskite-fluorite nanocomposites PrNi0.5Co0.5O3–δ–Ce0.9Y0.1O2–δ (PNC–YDC) were studied by isotope exchange of oxygen with C18O2 and 18O2 in flow and closed reactors. For LnCNO a high oxygen mobility was shown (D* ~ 10–7 cm2/s at 700 °C), being provided by the cooperative mechanism of oxygen migration involving both regular and highly-mobile interstitial oxygen. For PNC–YDC dominated a wide fast diffusion channel via fluorite phase and interphases due to features of the redistribution of cations resulting in superior oxygen mobility (D* ~ 10–8 cm2/s at 700 °C). After optimization of composition and nanodomain structure of these materials, as cathodes of SOFC they provided a high power density, while for asymmetric supported oxygen separation membranes – a high oxygen permeability. © 2020Support of different parts of the work by the Russian Science Foundation (Project 16-13-00112) and the budget project №AAAA-A17-117041110045-9 for Boreskov Institute of Catalysis is gratefully acknowledged. The authors from the Ural Federal University are grateful to the Government of the Russian Federation (Agreement 02.A03.21.0006, Act 211). Ce 0.9 Y 0.1 O 2–δ |Ce 0.9 Gd 0.1 O 2–δ |Ni/Zr 0.84 Y 0.16 O 2–δ anodic half-cells and Ni/Al foam substrates were kindly provided by H.C. Starck, Germany and Powder Metallurgy Institute NAN Belarus, respectively. Authors would like to appreciate International Conference on Advances in Energy Systems and Environmental Engineering (ASEE19, Wroclaw, Poland, June 9-12, 2019) Organization Committee

Approaches in biotechnological applications of natural polymers

Natural polymers, such as gums and mucilage, are biocompatible, cheap, easily available and non-toxic materials of native origin. These polymers are increasingly preferred over synthetic materials for industrial applications due to their intrinsic properties, as well as they are considered alternative sources of raw materials since they present characteristics of sustainability, biodegradability and biosafety. As definition, gums and mucilages are polysaccharides or complex carbohydrates consisting of one or more monosaccharides or their derivatives linked in bewildering variety of linkages and structures. Natural gums are considered polysaccharides naturally occurring in varieties of plant seeds and exudates, tree or shrub exudates, seaweed extracts, fungi, bacteria, and animal sources. Water-soluble gums, also known as hydrocolloids, are considered exudates and are pathological products; therefore, they do not form a part of cell wall. On the other hand, mucilages are part of cell and physiological products. It is important to highlight that gums represent the largest amounts of polymer materials derived from plants. Gums have enormously large and broad applications in both food and non-food industries, being commonly used as thickening, binding, emulsifying, suspending, stabilizing agents and matrices for drug release in pharmaceutical and cosmetic industries. In the food industry, their gelling properties and the ability to mold edible films and coatings are extensively studied. The use of gums depends on the intrinsic properties that they provide, often at costs below those of synthetic polymers. For upgrading the value of gums, they are being processed into various forms, including the most recent nanomaterials, for various biotechnological applications. Thus, the main natural polymers including galactomannans, cellulose, chitin, agar, carrageenan, alginate, cashew gum, pectin and starch, in addition to the current researches about them are reviewed in this article.. }To the Conselho Nacional de Desenvolvimento Cientfíico e Tecnológico (CNPq) for fellowships (LCBBC and MGCC) and the Coordenação de Aperfeiçoamento de Pessoal de Nvíel Superior (CAPES) (PBSA). This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit, the Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and COMPETE 2020 (POCI-01-0145-FEDER-006684) (JAT)