3,472 research outputs found
Laser Wire Scanner: Basic Process and Perspectives for the CTF's and CLIC Machines
In a laser wire scanner, the basic idea is to replace the solid wire classically used in a standard wire scanner by a narrow laser beam. The basic process involved is the Thomson-Compton scattering process, where photons are scattered from the laser beam by the incoming electrons. By counting the number of scattered photons or degraded electrons as a function of laser position the bunch profile can be reconstructed. In this note the Compton scattering mechanism is first presented. In the framework of the CLIC project, a laser wire scanner (LWS) could be used as a non-interfering beam profile measurement both on the Drive Beam for a high current electron beam and on the Main Beam for very small electron beam sizes. A design for a LWS on the CTF2 and CTF3 machines is proposed and some considerations for the use of a LWS on the CLIC main beam are also mentioned
Spatially heterogeneous dynamics in granular compaction
We prove the emergence of spatially correlated dynamics in slowly compacting
dense granular media by analyzing analytically and numerically multi-point
correlation functions in a simple particle model characterized by slow
non-equilibrium dynamics. We show that the logarithmically slow dynamics at
large times is accompanied by spatially extended dynamic structures that
resemble the ones observed in glass-forming liquids and dense colloidal
suspensions. This suggests that dynamic heterogeneity is another key common
feature present in very different jamming materials.Comment: 4 pages, 3 figure
Investigations of OTR screen surfaces and shapes
Optical transition radiation (OTR) has proven to be a flexible and effective tool for measuring a wide range of beam parameters, in particular the beam divergence and the transverse beam profile. It is today an established and widely used diagnostic method providing linear real-time measurements. Measurements in the CLIC Test Facility (CTF3) showed that the performance of the present profile monitors is limited by the optical acceptance of the imaging system. In this paper, two methods to improve the systems' performance are presented and results from measurements are shown. First, the influence of the surface quality of the OTR screen itself is addressed. Several possible screen materials have been tested to which different surface treatment techniques were applied. Results from the measured optical characteristics are given. Second, a parabolic-shaped screen support was investigated with the aim of providing an initial focusing of the emitted radiation and thus to reduce the problem of aperture limitation
Segmented Beam Dump for Time Resolved Spectrometry on a High Current Electron Beam
In the CLIC Test Facility 3 (CTF3), the strong coupling between the beam and the accelerating cavities induces transient effects such that the head of the pulse is accelerated twice as much as the rest of the pulse. Three spectrometer lines are installed along the linac with the aim of measuring energy spread versus time with a 20ns resolution. A major difficulty is due to the high power carried by the beam which imposes extreme constraints of thermal and radiation resistances on the detector. This paper presents the design and the performances of a simple and easy-to-maintain device, called âsegmented dump'. In this device, the particles are stopped inside metallic plates and the deposited charge is measured in the same way as in Faraday cups. Simulations were carried out with the Monte Carlo code âFLUKA' to evaluate the problems arising from the energy deposition and to find ways to prevent or reduce them. The detector resolution was optimized by an adequate choice of material and thickness of the plates. The overall layout of the monitor is described with special emphasis on its mechanical assembly. Finally, limitations arising at higher beam energies are discussed
Alternative techniques for beam halo measurements
In future high intensity, high energy accelerators it must be ensured that particle losses are minimized, as activation of the vacuum chambers or other components makes maintenance and upgrade work time consuming and costly. It is imperative to have a clear understanding of the mechanisms that can lead to halo formation and to have the possibility to test available theoretical models with an adequate experimental setup. Measurements based on optical transition radiation (OTR) are a well-established technique for measurements of the transverse beam profile. However, in order to be suitable for halo measurements as well, the dynamic range of the final image acquisition system needs to be high, being able to cover at least five orders of magnitude in intensity changes. Here, the performance of a standard acquisition system as it is used in the CLIC test facility (CTF3) is compared to a step-by-step measurement with a small movable photo multiplier tube and an innovative camera system based on charge injection device (CID) technology. Special emphasis is given on a description of the characteristics of the latter system
Optical Flow on Evolving Surfaces with an Application to the Analysis of 4D Microscopy Data
We extend the concept of optical flow to a dynamic non-Euclidean setting.
Optical flow is traditionally computed from a sequence of flat images. It is
the purpose of this paper to introduce variational motion estimation for images
that are defined on an evolving surface. Volumetric microscopy images depicting
a live zebrafish embryo serve as both biological motivation and test data.Comment: The final publication is available at link.springer.co
High dynamic range beam profile measurements
In future high intensity, high energy accelerators, beam loss has to be minimized to maximize performance and reduce activation of accelerator components. It is imperative to have a clear understanding of the mechanisms that can lead to halo formation and to have the possibility to test available theoretical models with an adequate experimental setup. Measurements based on optical transition radiation (OTR) provide an interesting opportunity for high resolution measurements of the transverse beam profile. In order to be applicable for measurements within the beam halo region, it is of utmost importance that a high dynamic range is covered by the image acquisition system. The existing camera system as it is installed in the CLIC Test Facility (CTF3) is compared to a step-by-step measurement with a photo multiplier tube (PMT) and measurements with a cooled charge injection device (CID) camera. The latter acquisition technique provides an innovative and highly flexible approach to high dynamic range measurements and is presented in some detail
Advanced Experimental Techniques for RF and DC Breakdown Research
Advanced experimental techniques are being developed to analyze RF and DC breakdown events. First measurements with a specially built spectrometer have been made with a DC spark setup [1] at CERN and will soon be installed in the CLIC 30GHz accelerating structure test stand to allow comparison between DC and RF breakdown phenomena. This spectrometer is able to measure the light intensity development during a breakdown in narrow wavelength bands in the visible and near infrared range. This will give information about the important aspects of the breakdown including chemical elements, temperature, plasma parameters and possibly precursors of a breakdown
A Large Scintillating Screen for the LHC Dump Line
The 7 TeV proton beam from the LHC ring is ejected through a long transfer line to beam dump blocks, approximately 100m downstream of the ejection septa, a series of dilution kicker magnets provide a sweeping deflection spreading the extracted beam over a 40 cm diameter area on the face of the beam dump cores. During normal operation, the quality of each dump event must be recorded and verified. The so-called âワPost-Mortemâ dataset will include information from the beam dumping system (logic signals, kicker pulsesâ¦) as well as from the beam diagnostics along the extraction lines. For this purpose, profile monitors in front of the dump blocks must be permanently available during machine operation. With more than 1014 protons stored in LHC, the energy deposited in the screen becomes an issue and thermalresistant materials have to be considered. In this paper, the design of this quite unusual device is presented. The different technical options considered for the choice of the screen material are discussed first. The complete layout of the installation is then described with a special emphasis on the mechanical design, the screen assembly and the choice of the radiation-hard camera used to observe the screen
Sulfonylative Hiyama Cross-Coupling: Development and Mechanistic Insights
International audienceDue to distinctive structural and electronic features, sulfones have attracted a particular attention over the pa st few decades, ma king it a widespread functional group.[1] Present in many contemporary pharmaceuticals and agrochemicals, they are also used as essential intermediates in organic synthesis. Therefore, numérous methodologies have been developed for their preparation. [1] However, the most common methods suffer from significant limitations with harsh reaction conditions or regioselectivity issues. Recently, the insertion of a molecule of sulfur dioxide between two partners was investigated and reactions involving organomagnesium,[2a] organozind2b] and organoboron[2c] compounds were reported. Herein we report a direct single-step palladium-catalyzed synthesis of sulfones involving organosilanes, sulfur dioxide and organohalides. Different mechanistic pathways were envisaged and discussed both from an experimental and theoretical stand point
- …