Mask-free laser lithography for rapid and low-cost microfluidic device fabrication

Microfluidics has become recognized as a powerful platform technology associated with a constantly increasing array of applications across the life sciences. This surge of interest over recent years has led to an increased demand for microfluidic chips, resulting in more time being spent in the cleanroom fabricating devices using soft lithography—a slow and expensive process that requires extensive materials, training and significant engineering resources. This bottleneck limits platform complexity as a byproduct of lengthy delays between device iterations and affects the time spent developing the final application. To address this problem, we report a new, rapid, and economical approach to microfluidic device fabrication using dry resist films to laminate laser cut sheets of acrylic. We term our method laser lithography and show that our technique can be used to engineer 200 μm width channels for assembling droplet generators capable of generating monodisperse water droplets in oil and micromixers designed to sustain chemical reactions. Our devices offer high transparency, negligible device to device variation, and low X-ray background scattering, demonstrating their suitability for real-time X-ray-based characterization applications. Our approach also requires minimal materials and apparatus, is cleanroom free, and at a cost of around $1.00 per chip could significantly democratize device fabrication, thereby increasing the interdisciplinary accessibility of microfluidics

Target cells of human adenovirus type 12 in subtentorial brain tissue of newborn mice. I. Cyto-histomorphologic and immunofluorescent microscopic studies In vivo

Human adenovirus type 12 (Ad 12) was inoculated through subtentorial route into inbred newborn mice (C3H/BifB/Ki), and sequential changes of the brain and tumor induction were examined by histological and immunofluorescent methods. Two days after virus inoculation, Ad 12 specific tumor antigen (fluorescent T-antigen) appeared in the cells of ependymal and subventricular matrix layers, choroid plexuses and leptomeninges in the subtentorial as well as the supratentorial brains. After 10 days, these fluorescent positive cells decreased gradually in number but still remained focally beneath the ependyma. Sixty days later, early tumor nodules were detected in the same regions in which remained the fluorescent cells. After 107 days, neurological signs and well-developed tumors were noted in 25 of 63 (30.1%) mice examined. In the cerebellum, both of T-antigens and tumors were limited around the IVth ventricle, but not in the granular layers. Histomorphologically, the tumors were of primitive neuroectodermal origin and consisted of the cells resembling immature matrix cells in the subventricular zone. These findings strongly suggest that the virus has a selective affinity to the remaining matrix cells, but not to cerebellar granular cells, at least, in newborn mice.</p

Assessment of Parylene C Thin Films for Heart Valve Tissue Engineering

Background: Scaffolds are a key component of tissue-engineered heart valves (TEHVs). Several approaches had been adopted in the design of scaffolds using both natural and synthetic resources. We have investigated the suitability of parylene C (PC), a vapor deposited polymeric material, for the use as a scaffold in TEHV. Aims: To evaluate the adsorption of extracellular matrix components onto plasma-activated PC and study the biocompatibility of PC by measuring cellular adhesion, viability, apoptosis, and phenotypic expression of valve endothelial and interstitial cells. Finally, the mechanical properties of PC were compared with those of native aortic valve cusp tissue. Methods: PC slides were plasma activated and then coated with gelatin, type I collagen, or fibronectin. Porcine pulmonary valve endothelial and interstitial cells were then grown on plasma oxidized PC with different types of coatings and their adhesion was observed after 20 h of incubation. Cell viability was tested using the MTS assay, and apoptosis was estimated using TUNEL staining. The mechanical properties of PC and valve tissue were measured using a Bose Mechanical Tester. Finally, cell-seeded PC films were exposed to pulsatile pressure and aortic shear stress, respectively, to test their durability in a dynamic environment. Results: Our findings show that collagen and fibronectin could bind to plasma oxidized PC. Both valve endothelial and interstitial cells adhered to protein-coated ECM. PC had a profile of mechanical stiffness and ultimate tensile strength that were comparable with or in excess of those seen in porcine aortic valve cusps. Cells were still attached to PC films after 3 days of exposure to up to 50 mmHg pulsatile pressure or aortic levels of shear stress. Conclusion: PC is a promising candidate for use as a scaffold in tissue engineering heart valves. Additional studies are required to determine both the durability and long-term performance of cell-seeded PC when in a similar hemodynamic environment to that of the aortic valve

Surface and electrical characterization of Ag/AgCl pseudo-reference electrodes manufactured with commercially available PCB technologies

Lab-on-Chip is a technology that could potentially revolutionize medical Point-of-Care diagnostics. Considerable research effort is focused towards innovating production technologies that will make commercial upscaling financially viable. Printed circuit board manufacturing techniques offer several prospects in this field. Here, we present a novel approach to manufacturing Printed Circuit Board (PCB)-based Ag/AgCl reference electrodes, an essential component of biosensors. Our prototypes were characterized both structurally and electrically. Scanning Electron Microscopy (SEM) and X-Ray Photoelectron Spectroscopy (XPS) were employed to evaluate the electrode surface characteristics. Electrical characterization was performed to determine stability and pH dependency. Finally, we demonstrate utilization along with PCB pH sensors, as a step towards a fully integrated PCB platform, comparing performance with discrete commercial reference electrodes

Droplet microfluidics for the construction of compartmentalised model membranes

The design of membrane-based constructs with multiple compartments is of increasing importance given their potential applications as microreactors, as artificial cells in synthetic-biology, as simplified cell models, and as drug delivery vehicles. The emergence of droplet microfluidics as a tool for their construction has allowed rapid scale-up in generation throughput, scale-down of size, and control over gross membrane architecture. This is true on several levels: size, level of compartmentalisation and connectivity of compartments can all be programmed to various degrees. This tutorial review explains and explores the reasons behind this. We discuss microfluidic strategies for the generation of a family of compartmentalised systems that have lipid membranes as the basic structural motifs, where droplets are either the fundamental building blocks, or are precursors to the membrane-bound compartments. We examine the key properties associated with these systems (including stability, yield, encapsulation efficiency), discuss relevant device fabrication technologies, and outline the technical challenges. In doing so, we critically review the state-of-play in this rapidly advancing field

Hydrophilic surface modification of PDMS for droplet microfluidics using a simple, quick, and robust method via PVA deposition

Polydimethylsiloxane (PDMS) is a dominant material in the fabrication of microfluidic devices to generate water-in-oil droplets, particularly lipid-stabilized droplets, because of its highly hydrophobic nature. However, its key property of hydrophobicity has hindered its use in the microfluidic generation of oil-in-water droplets, which requires channels to have hydrophilic surface properties. In this article, we developed, optimized, and characterized a method to produce PDMS with a hydrophilic surface via the deposition of polyvinyl alcohol following plasma treatment and demonstrated its suitability for droplet generation. The proposed method is simple, quick, effective, and low cost and is versatile with respect to surfactants, with droplets being successfully generated using both anionic surfactants and more biologically relevant phospholipids. This method also allows the device to be selectively patterned with both hydrophilic and hydrophobic regions, leading to the generation of double emulsions and inverted double emulsions

Surface and electrical characterization of Ag/AgCl pseudo-reference electrodes manufactured with commercially available PCB technologies

Lab-on-Chip is a technology that could potentially revolutionize medical Point-of-Care diagnostics. Considerable research effort is focused towards innovating production technologies that will make commercial upscaling financially viable. Printed circuit board manufacturing techniques offer several prospects in this field. Here, we present a novel approach to manufacturing Printed Circuit Board (PCB)-based Ag/AgCl reference electrodes, an essential component of biosensors. Our prototypes were characterized both structurally and electrically. Scanning Electron Microscopy (SEM) and X-Ray Photoelectron Spectroscopy (XPS) were employed to evaluate the electrode surface characteristics. Electrical characterization was performed to determine stability and pH dependency. Finally, we demonstrate utilization along with PCB pH sensors, as a step towards a fully integrated PCB platform, comparing performance with discrete commercial reference electrode

New directions for artificial cells using rapid prototyped biosystems

Microfluidics has been shown to be capable of generating a range of single- and multi- compartment vesicles and bilayer delineated droplets that can be assembled in 2D and 3D. These model systems are becoming increasingly recognized as powerful biomimetic constructs for assembling tissue models, engineering therapeutic delivery systems and for screening drugs. One bottleneck in developing this technology is the time, expertise and equipment required for device fabrication. This has led to interest across the microfluidics community in using rapid prototyping to engineer microfluidic devices from Computer Aided Design (CAD) drawings. We highlight how this rapid prototyping revolution is transforming the fabrication of microfluidic devices for bottom-up synthetic biology. We provide an outline of the current landscape and present how advances in the field may give rise to the next generation of multifunctional biodevices, particularly with Industry 4.0 on the horizon. Successfully developing this technology and making it open-source could pave the way for a new generation of citizen-led science, fueling the possibility that the next multi-billion dollar start-up could emerge from an attic or a basement