7 research outputs found
Payanda ve FRP ile güçlendirilmiş betonarme minarelerin karşılaştırmalı sismik analizi
In recent earthquakes occurred in Turkey, an unexpected number of reinforced concrete (RC) minarets were heavily damaged or
collapsed causing loss of lives and economic damages. These structures can be counted as the most common constructed slender
structures in Turkey. Therefore, the detailed behavior of these slender structures should be determined in order to strengthen the
existing ones and construct safer and stronger RC minarets. In this study, the most common constructed types of RC minarets were
analyzed under 17 August 1999 Mw 7.4 Kocaeli Earthquake for the determination of the effectiveness of strengthening techniques
namely fiber reinforced polymers (FRP) and buttresses. Also, soil-structure interaction (SSI) is included in the dynamic seismic
analyses of the minarets as proposed by Burman et al. (2012). At the end of the analyses performed, it was determined that FRP
strengthening is more effective in enhancing the seismic response of RC minarets as the height of the minaret increases when compared
with the buttress strengthening. Also, the stress demand locations predicted from the dynamic seismic analyses of the representative
minarets were found to be consistent with the damages observed in recent earthquakes.Türkiye'de son zamanlarda meydana gelen depremlerde, beklenmeyen sayıda betonarme minare, can ve ekonomi kaybına neden olarak
ağır hasar görmüş veya tamamen yıkılmıştır. Bu yapılar, Türkiye'deki en yaygın inşa edilmiş narin yapılar olarak sayılabilir. Bu
nedenle, bu narin yapıların ayrıntılı davranışı, mevcut yapıların güçlendirilmesi ve daha güvenli ve güçlü betonarme minarelerin inşa
edilmesi için belirlenmelidir. Bu çalışmada, en yaygın inşa edilmiş betonarme minare tipleri, 17 Ağustos 1999 Mw 7.4 Kocaeli Depremi
etkisi altında, güçlendirme tekniklerinin, yani lifli polimerlerin (LP) ve payandaların etkinliğinin tespiti için analiz edilmiştir. Ayrıca,
Burman vd. (2012) tarafından önerilen zemin-yapı etkileşimi, minarelerin dinamik sismik analizlerine dahil edilmiştir. Yapılan
analizlerin sonunda, LP güçlendirmesinin, yükseklik artışı oldukça payanda takviyesiyle güçlendirmeye kıyasla betonarme minarelerin
sismik davranışında daha etkili olduğu tespit edilmiştir. Ayrıca, temsili minarelerin dinamik sismik analizlerinden tahmin edilen
gerilme talep bölgelerinin son depremlerde gözlemlenen hasarlarla tutarlı olduğu tespit edilmiştir
Dynamic Seismic and Wind Response of Masonry Minarets
Historical masonry structures i.e. minarets, towers, mosques or bastions are the heritage of past generations to the future societies as they carry the traces of the past communities. Among these structures, historical masonry minarets are one of the most generally constructed structure that reflects the beauty and magnificence of Islamic culture. Under severe winds and earthquakes, most of them were severely damaged or collapsed. Therefore, it is an inevitable duty for us to conduct and investigate their dynamic behavior under these vital actions of nature. In this study, the dynamic seismic and wind response of a historical minaret of İskenderpaşa Mosque that is selected from the technical literature is investigated by using different methods i.e. wind loading procedures of TS498, CICIND Model Code and Eurocode 1, the design spectrums of CICIND Model Code and Eurocode 8 for different types of soils, the time histories of real ground motions of Düzce and Kocaeli Earthquakes. At the end of the study, top joint displacements and stress distributions are obtained and interpreted. The findings of this study showed that the dynamic behavior of this historical masonry minaret is wind dominant (CICIND Model Code) and tensile and shear stress accumulations at the junction point of transition segment and cylindrical body of the minaret is the main reason for the collapse without showing any ductile behavior
Wind loads for stadium lighting towers according to Eurocode 1
The determination of actions on structures is an important step of in the design process. In nature, so many outer and inner actions are acting on structures continuously. The two most important ones of those actions are the earthquake and wind actions. For some structures, i.e. towers, high chimneys or lighting towers, the priority of these two severe actions can change. Wind forces can become a governing force on the design of these structures. Therefore, the determination of wind forces for these tall, slender and wind-sensitive structures becomes very important. Also, these tall and slender structures have a high ratio of height to least diameter that makes them more slender and wind-sensitive than any other structures. In this study, the determination of wind loads for a selected and modeled stadium lighting tower was given according to Eurocode 1 which is an international well-known standard. This study showed that it is difficult to calculate wind loads of stadium lighting towers according to Eurocode 1 because of the complexity of the document, insufficient explanation of some formulas like resonant response factor and unclear graph sections for the reader. This study is believed to enlighten the way of the users of Eurocode 1
Twitter'da Duygu Analizi Yöntemi Kullanılarak Bitcoin Değer Tahminlemesi
Bütün sektörler dahilinde finans sektöründe de müşterilere ait fikir ve düşüncelerinin belirlenmesi, firma ve kurumların ileriki dönemler için sunacağı hizmetleri etkilemektedir. Kripto para birimlerinin (Bitcoin, Ethereum, Ripple vb.) ekonomik ve sosyal etkileri hızla artmaya devam ettikçe, ilgili haber makalelerinin ve sosyal medya yayınlarının, özellikle de tweetlerin yaygınlığı da artmaktadır. Bu çalışmada, Twitter kullanıcılarının finans sektörü konularından biri olan Bitcoin ile ilgili yorumları derlenerek bir duygu analizi çalışması yapılmıştır. Kullanıcı yorumları, Twitter’ın sunmuş olduğu API hizmeti vasıtasıyla Python Programlama Dili kullanılarak alınmış; yorumlar olumlu, nötr ve olumsuz etiketler ile ayrıştırılmış, etiket bulutunda toplanmıştır. Naïve Bayes ve Lojistik Regresyon algoritmaları kullanılarak oluşturulan modellerde başarı oranları karşılaştırılmıştır. Naïve Bayes uygulamasının tweetlerin duygularını tahmin etmedeki başarı oranı %72,19 olurken, Lojistik Regresyon uygulamasında bu oran %75,53 olmuştur. Çalışmanın ikinci aşamasında ise, duygu analizinden sonra “Bitcoin” anahtar kelimesi içeren günlük pozitif tweet oranı ile Bitcoin günlük açılış değeri beraber kullanılarak Bitcoin kapanış değeri tahminlemesi yapılmıştır. Finans verileri Yahoo Finance web sitesi üzerinden alınmış; Doğrusal Regresyon ve Rastgele Orman Regresyon yöntemleri ile modeller oluşturulmuştur. Doğrusal Regresyon için r² değeri %88,97 çıkarken, Rastgele Orman Regresyonu için ise %94,16 olmuştur.Anahtar Kelimeler: Duygu analizi, Twitter, Bitcoin, Makine öğrenmesi, Veri madenciliği, Finan
Betonarme Minarelerin Zemin-Yapı Etkileşimiyle Rüzgâr Yükü Hesaplamasında TS498 ve TS-EN-1991-1-4’ün Kullanılması
Minareler,
İslami mimarinin en güzel, anlamlı ve bir o kadar da narin eserleri arasında
bulunmaktadır. Bu narin yapılar, ilk zamanlarda, yığma ve kısa bir şekilde
yapılmış olmalarına rağmen, zaman ilerledikçe, betonarme, ince cidarlı ve uzun
minarelerin yapımı tercih edilmiştir. Bu durum ise birçok betonarme minarenin
rüzgâr ve deprem kuvvetleri altında hasar görmesine veya yıkılmasına sebep
olmuştur. Bu konu ile ilgili olarak, şiddetli rüzgârlardan dolayı, Türkiye’de
de birçok minare yıkılması olayı gerçekleşmiştir. Bu sebepten dolayı, bu
çalışmada, TS498 ve TS-EN-1991-1-4 standartlarına göre, seçilen bir betonarme
minareye etkiyen rüzgâr yükleri ayrıntılı bir şekilde hesaplanmıştır. Yapılan
hesaplamalarda ayrıca, zemin yapı etkileşiminin, hesaplanan rüzgâr yüklerine
etkileri de incelenmiştir. Çalışmanın sonunda, yapılan hesaplamalar sonucunda
elde edilen rüzgâr yüklerinin karşılaştırılması yapılmıştır. Elde edilen
veriler, zemin yapı etkileşiminin rüzgâr yükleri üzerinde olumsuz bir etkisi
olduğunu, bunları arttırdığını ve rüzgar yükü hesaplamalarında zemin yapı
etkileşiminin de dahil edilmesi gerektiğini göstermektedir
Zemin-yapı etkileşiminin betonarme bacaların dinamik davranışına etkisi
Bacalar, atık ve sıcak
gazları atmosfere çekmek için kullanılmakta olup fabrikaların en önemli kısmını
oluşturmaktadır. Günümüzde, çevre ihtiyaçları ile ilgili kodların
gereksinimlerini karşılamak için, bu narin yapıların yüksekliği artmakta, bu da
onları dinamik sismik yüklere karşı daha savunmasız hale getirmektedir. Bu
sebepten dolayı, bu uzun ve narin yapıların genel dinamik davranışı, zemin
etkisi de dikkate alınarak anlaşılmalıdır. Bu çalışmada, bir model bacanın
dinamik davranışı, açıklıklar, baca temeli ve zemin etkisiyle ayrı ayrı ele
alınarak belirlenmiştir. Bu çalışmanın bulguları, zemin-yapı etkileşiminin
(ZYE), betonarme bacaların dinamik davranışını etkileyen önemli bir olay
olduğunu ortaya çıkarmıştır
Three-dimensional static analysis of reinforced concrete cantilever beam using MATLAB Partial Differential Equation Toolbox
Nowadays, three-dimensional (3D) solid model of the structures can be prepared by using computer aided design programs. There are many numerical methods for static, dynamic and temperature analysis of structural systems. The most preferred among these methods is the finite element method (FEM). In this method, the structural model with different geometry and boundary conditions should be solved by utilizing partial differential equations. Due to the long solution time while performing, finite element programs require computers with very good features. Therefore, analyses with desired features can be performed by using open source programs to shorten the duration of analysis. In this study, specifically, the static analysis of the selected reinforced concrete (RC) cantilever beam was carried out by using the open source MATLAB partial differential toolbox based on the FEM. Since the program used is open source, different concrete classes and finite element models were selected for the cited cantilever beam and static analyses were performed. As a result of the MATLAB partial differential toolbox analyses, the displacement, stress and deformation of the cantilever beam were obtained in 3D and compared with the ones obtained from ANSYS computer program