Speckle techniques for determining stresses in moving objects

Laser speckle interferometry is a relatively new experimental technique which shows promise of alleviating many difficult problems in experimental mechanics. The method utilizes simple high-resolution photographs of the surface which is illuminated by coherent light. The result is a real-time or permanently stored whole-field record of interference fringes which yields a map of displacements in the object. In this thesis, the time-average theory using the Fourier transform is developed to present the application of this technique to measurement of in-plane displacement induced by the vibration of an object

Development of basic theories and techniques for determining stresses in rotating turbine or compressor blades

A method for measuring in-plane displacement of a rotating structure by using two laser speckle photographs is described. From the displacement measurements one can calculate strains and stresses due to a centrifugal load. This technique involves making separate speckle photographs of a test model. One photograph is made with the model loaded (model is rotating); the second photograph is made with no load on the model (model is stationary). A sandwich is constructed from the two speckle photographs and data are recovered in a manner similar to that used with conventional speckle photography. The basic theory, experimental procedures of this method, and data analysis of a simple rotating specimen are described. In addition the measurement of in-plane surface displacement components of a deformed solid, and the application of the coupled laser speckle interferometry and boundary-integral solution technique to two dimensional elasticity problems are addressed

Manual for extending the laser specklegram technique to strain analysis of rotating components

The theory, techniques, and equipment necessary for extending laser speckle techniques to analyze stresses in rotating blades are described. Details for setting up the equipment, for timing the events, for data recording, and for data analysis are discussed. Finite element techniques are investigated for analysis of speckle data. Advantages and limitations of the finite element analysis for the speckle data are discussed. The finite element program is listed

Creep analysis of fuel plates for the Advanced Neutron Source

The reactor for the planned Advanced Neutron Source will use closely spaced arrays of fuel plates. The plates are thin and will have a core containing enriched uranium silicide fuel clad in aluminum. The heat load caused by the nuclear reactions within the fuel plates will be removed by flowing high-velocity heavy water through narrow channels between the plates. However, the plates will still be at elevated temperatures while in service, and the potential for excessive plate deformation because of creep must be considered. An analysis to include creep for deformation and stresses because of temperature over a given time span has been performed and is reported herein

Dynamic pressure approach to analysis of reactor fuel plate stability

The dynamic pressure model can conveniently be used to evaluate the critical stress regions as a function of flow velocity. For some of the preliminary advanced neutron source reactor plate designs this could be very significant since the flow velocity could be limited by peak stresses in the plates more than by deflection or stability. The dynamic pressure results predicts the differential pressure across a plate as a function of flow velocity. The pressure differential can then be used to find the deflection and/or stress of the plate using traditional plate analyses. Instability would occur when plates are touching at mid-channel such that rapid oscillations of pressure can occur. The technique is conservative and gives a design limit for the plate. This model is one of several methods being used in the design of the ANS fuel elements. 10 refs., 4 figs

Pressure reversal study through tensile tests

This paper is a summary of the results from a study of the variables related to pressure reversal and was sponsored by the US Department of Transportation, Office of Pipeline Safety. The circumferential pipe stress, which is the most significant variable in pressure reversal, was examined by using tensile specimens and then relating the results to pressurized pipe. A model is proposed that gives some insight into how pressure reversal can be minimized when a section of pipe is being hydrotested. Twenty tensile specimens from X-42 electric resistance welded (ERW) pipe and twenty specimens from X-52 ERW pipe were tested. Each specimen had a machined flaw. The flaw regions were monitored using strain gages and photoelasticity. These tensile tests represent the first phase of a research effort to examine and understand the variables related to pressure reversal. The second phase of this effort will be with pipe specimens and presently is in progress

Evolution of central pattern generators for the control of a five-link bipedal walking mechanism

Central pattern generators (CPGs), with a basis is neurophysiological studies, are a type of neural network for the generation of rhythmic motion. While CPGs are being increasingly used in robot control, most applications are hand-tuned for a specific task and it is acknowledged in the field that generic methods and design principles for creating individual networks for a given task are lacking. This study presents an approach where the connectivity and oscillatory parameters of a CPG network are determined by an evolutionary algorithm with fitness evaluations in a realistic simulation with accurate physics. We apply this technique to a five-link planar walking mechanism to demonstrate its feasibility and performance. In addition, to see whether results from simulation can be acceptably transferred to real robot hardware, the best evolved CPG network is also tested on a real mechanism. Our results also confirm that the biologically inspired CPG model is well suited for legged locomotion, since a diverse manifestation of networks have been observed to succeed in fitness simulations during evolution.Comment: 11 pages, 9 figures; substantial revision of content, organization, and quantitative result

Preliminary measurements for a sub-femtosecond electron bunch length diagnostic

With electron beam durations down to femtoseconds and sub-femtoseconds achievable in current state-of-the-art accelerators, longitudinal bunch length diagnostics with resolution at the attosecond level are required. In this paper, we present such a novel measurement device which combines a high-power laser modulator with an RF deflecting cavity in the orthogonal direction. While the laser applies a strong correlated angular modulation to a beam, the RF deflector ensures the full resolution of this streaking effect across the bunch hence recovering the temporal beam profile with sub-femtosecond resolution. Preliminary measurements to test the key components of this concept were carried out at the Accelerator Test Facility (ATF) at Brookhaven National Laboratory recently, the results of which are presented and discussed here. Moreover, a possible application of the technique for novel accelerator schemes is examined based on simulations with the particle-tracking code elegant and our beam profile reconstruction tool

Patterns of clinical presentation of adult coeliac disease in a rural setting

BACKGROUND: In recent years there has been increasing recognition that the pattern of presentation of coeliac disease may be changing. The classic sprue syndrome with diarrhoea and weight loss may be less common than the more subtle presentations of coeliac disease such as an isolated iron deficiency anaemia. As a result, the diagnosis of this treatable condition is often delayed or missed. Recent serologic screening tests allow non-invasive screening to identify most patients with the disease and can be applied in patients with even subtle symptoms indicative of coeliac disease. Both benign and malignant complications of coeliac disease can be avoided by early diagnosis and a strict compliance with a gluten free diet. AIM: The aim of this study is to evaluate the trends in clinical presentation of patients diagnosed with adult coeliac disease. In addition, we studied the biochemical and serological features and the prevalence of associated conditions in patients with adult coeliac disease. METHODS: This is an observational, retrospective, cross-sectional review of the medical notes of 32 adult patients attending the specialist coeliac clinic in a district general hospital. RESULTS: Anaemia was the most common mode of presentation accounting for 66% of patients. Less than half of the patients had any of the classical symptoms of coeliac disease and 25% had none of the classical symptoms at presentation. Anti-gliadin antibodies, anti-endomysial antibody and anti-tissue transglutaminase showed 75%, 68% and 90% sensitivity respectively. In combination, serology results were 100% sensitive as screening tests for adult coeliac disease. Fifty nine percent patients had either osteoporosis or osteopenia. There were no malignant complications observed during the follow up of our patients. CONCLUSION: Most adults with coeliac disease have a sub clinical form of the disease and iron deficiency anaemia may be its sole presenting symptom. Only a minority of adult coeliac disease patients present with classical mal-absorption symptoms of diarrhoea and weight loss. Patients with atypical form of disease often present initially to hospital specialists other than a gastro-enterologist. An awareness of the broad spectrum of presentations of adult coeliac disease, among doctors both in primary care and by the various hospital specialists in secondary care, is necessary to avoid delays in diagnosis. It is important to include serological screening tests for coeliac disease systematically in the evaluation of adult patients with unexplained iron deficiency anaemia or unexplained gastro-intestinal symptoms and in those who are considered to be at increased risk for coeliac disease