16 research outputs found

    Size-based ion selectivity of micropore electric double layers in capacitive deionization electrodes

    Full text link
    Capacitive deionization (CDI) is a fast-emerging technology most commonly applied to brackish water desalination. In CDI, salt ions are removed from the feedwater and stored in electric double layers (EDLs) within micropores of electrically charged porous carbon electrodes. Recent experiments have demonstrated that CDI electrodes exhibit selective ion removal based on ion size, with the smaller ion being preferentially removed in the case of equal-valence ions. However, state-of-the-art CDI theory does not capture this observed selectivity, as it assumes volume-less point ions in the micropore EDLs. We here present a theory which includes multiple couterionic species, and relaxes the point ion assumption by incorporating ion volume exclusion interactions into a description of the micropore EDLs. The developed model is a coupled set of nonlinear algebraic equations which can be solved for micropore ion concentrations and electrode Donnan potential at cell equilibrium. We demonstrate that this model captures key features of the experimentally observed size-based ion selectivity of CDI electrodes

    Water Purification by Shock Electrodialysis: Deionization, Filtration, Separation, and Disinfection

    Get PDF
    The development of energy and infrastructure efficient water purification systems are among the most critical engineering challenges facing our society. Water purification is often a multi-step process involving filtration, desalination, and disinfection of a feedstream. Shock electrodialysis (shock ED) is a newly developed technique for water desalination, leveraging the formation of ion concentration polarization (ICP) zones and deionization shock waves in microscale pores near to an ion selective element. While shock ED has been demonstrated as an effective water desalination tool, we here present evidence of other simultaneous functionalities. We show that, unlike electrodialysis, shock ED can thoroughly filter micron-scale particles and aggregates of nanoparticles present in the feedwater. We also demonstrate that shock ED can enable disinfection of feedwaters, as approximately 99%99\% of viable bacteria (here \textit{E. coli}) in the inflow were killed or removed by our prototype. Shock ED also separates positive from negative particles, contrary to claims that ICP acts as a virtual barrier for all charged particles. By combining these functionalities (filtration, separation and disinfection) with deionization, shock ED has the potential to enable more compact and efficient water purification systems

    Performance Metrics for the Objective Assessment of Capacitive Deionization Systems

    Get PDF
    In the growing field of capacitive deionization (CDI), a number of performance metrics have emerged to describe the desalination process. Unfortunately, the separation conditions under which these metrics are measured are often not specified, resulting in optimal performance at minimal removal. Here we outline a system of performance metrics and reporting conditions that resolves this issue. Our proposed system is based on volumetric energy consumption (Wh/m3^3) and throughput productivity (L/h/m2^2) reported for a specific average concentration reduction, water recovery, and feed salinity. To facilitate and rationalize comparisons between devices, materials, and operation modes, we propose a nominal standard testing condition of removing 5 mM from a 20 mM NaCl feed solution at 50% water recovery for CDI research. Using this separation, we compare the desalination performance of a flow-through electrode (fte-CDI) cell and a flow between membrane (fb-MCDI) device, showing how significantly different systems can be compared in terms of generally desirable desalination characteristics. In general, we find that performance analysis must be considered carefully so to not allow for ambiguous separation conditions or the maximization of one metric at the expense of another. Additionally, for context we discuss a number of important underlying performance indicators and cell characteristics that are not performance measures in and of themselves but can be examined to better understand differences in performance

    Robust estimation of bacterial cell count from optical density

    Get PDF
    Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

    Measurements of the electric conductivity of an electrode as it transitions between static and flowable modes

    No full text
    Electrochemical systems which store energy or desalinate water employ either static electrodes or flowable suspension electrodes. Flowable electrodes enable important functionalities not available to static electrodes, but suffer from significantly lower electric conductivity, typically of order 1 or 10 mS/cm. To combine the benefits of static and flowable electrodes, we here propose and demonstrate an electrode which can be switched between a flow-through static mode and flowable mode in operando. We provide first-time measurements of the electrode's electric conductivity as it undergoes velocity cycling and transitions between modes. The electrode achieves a gigantic conductivity of over 10,000 mS/cm while in static mode, and demonstrates repeatable switching between static and flowable modes at a tunable transition velocity. Such switchable electrodes can in the future enable novel, highly versatile electrochemical systems. Keywords: Electrochemistry, Energy conversion, Flowable electrodes, Flow batteries, Capacitive deionizatio

    Basic principles of electrolyte chemistry for microfluidic electrokinetics. Part II: Coupling between ion mobility, electrolysis, and acid-base equilibria

    No full text
    We present elements of electrolyte dynamics and electrochemistry relevant to microfluidic electrokinetics experiments. In Part I of this two-paper series, we presented a review and introduction to the fundamentals of acid-base chemistry. Here, we first summarize the coupling between acid-base equilibrium chemistry and electrophoretic mobilities of electrolytes, at both infinite and finite dilution. We then discuss the effects of electrode reactions on microfluidic electrokinetic experiments and derive a model for pH changes in microchip reservoirs during typical direct-current electrokinetic experiments. We present a model for the potential drop in typical microchip electrophoresis device. The latter includes finite element simulation to estimate the relative effects of channel and reservoir dimensions. Finally, we summarize effects of electrode and electrolyte characteristics on potential drop in microfluidic devices. As a whole, the discussions highlight the importance of the coupling between electromigration and electrophoresis, acid-base equilibria, and electrochemical reactions

    Electrochemical removal of amphoteric ions

    No full text
    Several harmful or valuable ionic species present in seawater, brackish water, and wastewater are amphoteric, weak acids or weak bases, and, thus, their properties depend on local water pH. Effective removal of these species can be challenging for conventional membrane technologies, necessitating chemical dosing of the feedwater to adjust pH. A prominent example is boron, which is considered toxic in high concentrations and often requires additional membrane passes to remove during seawater desalination. Capacitive deionization (CDI) is an emerging membraneless technique for water treatment and desalination, based on electrosorption of salt ions into charging microporous electrodes. CDI cells show strong internally generated pH variations during operation, and, thus, CDI can potentially remove pH-dependent species without chemical dosing. However, development of this technique is inhibited by the complexities inherent to the coupling of pH dynamics and ion properties in a charging CDI cell. Here, we present a theoretical framework predicting the electrosorption of pH-dependent species in flow-through electrode CDI cells. We demonstrate that such a model enables insight into factors affecting species electrosorption and conclude that important design rules for such systems are highly counterintuitive. For example, we show both theoretically and experimentally that for boron removal, the anode should be placed upstream and the cathode downstream, an electrode order that runs counter to the accepted wisdom in the CDI field. Overall, we show that to achieve target separations relying on coupled, complex phenomena, such as in the removal of amphoteric species, a theoretical CDI model is essential

    Resistance Breakdown of a Membraneless Hydrogen-Bromine Redox Flow Battery

    No full text
    A key bottleneck to society's transition to renewable energy is the lack of cost-effective energy storage systems. Hydrogen-bromine redox flow batteries are seen as a promising solution, due to the use of low-cost reactants and highly conductive electrolytes, but market penetration is prevented due to high capital costs, for example due to costly membranes to prevent bromine crossover. Membraneless hydrogen-bromine cells relying on colaminar flows have thus been investigated, showing high power density nearing 1 W/cm2. However, no detailed breakdown of resistance losses has been performed to-date, a knowledge gap which impedes further progress. Here, we characterize such a battery, showing the main sources of loss are the porous cathode, due to both Faradaic and Ohmic losses, followed by Ohmic losses in the electrolyte channel, with all other sources relatively minor contributors. We further develop and fit analytical expressions for the impedance of porous electrodes in high power density electrochemical cells to impedance measurements from our battery, which enabled the detailed cell resistance breakdown and determination of important electrode parameters such as volumetric exchange current density and specific capacitance. The insights developed here will enable improved engineering designs to unlock exceptionally high-power density membraneless flow batteries.ChemE/Transport Phenomen
    corecore