Direct observation of microscopic change induced by oxygen vacancy drift in amorphous TiO2 thin films

To clarify the resistive switching and failure mechanisms in Al/amorphous TiO2 /Al devices we investigate the microscopic change in amorphous titanium oxide films and interface layers after the set process according to film deposition temperatures. For low temperature (<150 ??C) samples, the thickness of top interface layer decreased after the set process due to the dissociation of a top interface layer by uniform migration of oxygen vacancies. Meanwhile, for high temperature samples, crystalline TiO phases emerged in the failed state, meaning the formation of conducting paths from the local clustering of oxygen vacancies in nonhomogeneous titanium oxide film.open221

Comprehensive modeling of resistive switching in the Al/TiOx/TiO2/Al heterostructure based on space-charge-limited conduction

The reversible resistance switching (RS) effect of the Al/TiO x/TiO2/Al heterostructure is investigated in this study. This RS was attributed to space-charge-limited conduction (SCLC) as controlled by localized traps in the TiOx layer. The preexisting SCLC theory was extended to describe the abrupt resistance transition. An analytical model was developed with consideration of the ratio of free and trapped carrier density, which was extracted from the experimental data to show exponentially distributed traps in energy. The proposed model can be applicable to RS phenomena induced by interface-type traps in other material system.open231

Flexible NO2 gas sensor using multilayer graphene films by chemical vapor deposition

We report a highly sensitive NO2 gas sensor based on multi-layer graphene (MLG) films synthesized by a chemical vapor deposition method on a microheater-embedded flexible substrate. The MLG could detect low-concentration NO2 even at sub-ppm (&lt;200 ppb) levels. It also exhibited a high resistance change of ~6% when it was exposed to 1 ppm NO2 gas at room temperature for 1 min. The exceptionally high sensitivity could be attributed to the large number of NO2 molecule adsorption sites on the MLG due to its a large surface area and various defect-sites, and to the high mobility of carriers transferred between the MLG films and the adsorbed gas molecules. Although desorption of the NO2 molecules was slow, it could be enhanced by an additional annealing process using an embedded Au microheater. The outstanding mechanical flexibility of the graphene film ensures the stable sensing response of the device under extreme bending stress. Our large-scale and easily reproducible MLG films can provide a proof-of-concept for future flexible NO2 gas sensor devices.clos

Microscopic origin of bipolar resistive switching of nanoscale titanium oxide thin films

We report a direct observation of the microscopic origin of the bipolar resistive switching behavior in nanoscale titanium oxide films. Through a high-resolution transmission electron microscopy, an analytical TEM technique using energy-filtering transmission electron microscopy and an in situ x-ray photoelectron spectroscopy, we demonstrated that the oxygen ions piled up at top interface by an oxidation-reduction reaction between the titanium oxide layer and the top Al metal electrode. We also found that the drift of oxygen ions during the on/off switching induced the bipolar resistive switching in the titanium oxide thin films.Comment: 10 pages, 4 figure

Flexible room-temperature NO2 gas sensors based on carbon nanotubes/reduced graphene hybrid films

We present a flexible room temperature NO2 gas sensor consisting of vertical carbon nanotubes (CNTs)/reduced graphene hybrid film supported by a polyimide substrate. The reduced graphene film alone showed a negligible sensor response, exhibiting abnormal N-P transitions during the initial NO2 injection. A hybrid film, formed by the growth of a vertically aligned CNT array (with CNTs 20 ??m in length) on the reduced graphene film surface, exhibited remarkably enhanced sensitivities with weak N-P transitions. The increase in sensitivity was mainly attributed to the high sensitivity of the CNT arrays. The outstanding flexibility of the reduced graphene films ensured stable sensing performances in devices submitted to extreme bending stress.open786

Bipolar resistive switching characteristics of poly(3,4-ethylene-dioxythiophene): poly(styrenesulfonate) thin film

We investigated the reversible resistive switching of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) thin films sandwiched between Al electrodes. The J-V sweep curve showed a hysteretic behavior which depends on the polarity of the applied voltage bias. From the analysis of I-V curves, it was revealed that the charge transport through the junction was governed by the bulk space-charge-limited conduction (SCLC) model. Using transmission electron microscopy (TEM) analysis, it was confirmed that the initial high resistance state of PEDOT:PSS films is related with the segregation of PSS- chains induced by redox reaction between a Al metal electrode and PEDOT:PSS film. Positive space charges present on the top region of PEDOT:PSS films can be proposed as a possible trap centers of electron trapping and detrapping process.Comment: 10 pages, 4 figure

Post-intervention Status in Patients With Refractory Myasthenia Gravis Treated With Eculizumab During REGAIN and Its Open-Label Extension

OBJECTIVE: To evaluate whether eculizumab helps patients with anti-acetylcholine receptor-positive (AChR+) refractory generalized myasthenia gravis (gMG) achieve the Myasthenia Gravis Foundation of America (MGFA) post-intervention status of minimal manifestations (MM), we assessed patients' status throughout REGAIN (Safety and Efficacy of Eculizumab in AChR+ Refractory Generalized Myasthenia Gravis) and its open-label extension. METHODS: Patients who completed the REGAIN randomized controlled trial and continued into the open-label extension were included in this tertiary endpoint analysis. Patients were assessed for the MGFA post-intervention status of improved, unchanged, worse, MM, and pharmacologic remission at defined time points during REGAIN and through week 130 of the open-label study. RESULTS: A total of 117 patients completed REGAIN and continued into the open-label study (eculizumab/eculizumab: 56; placebo/eculizumab: 61). At week 26 of REGAIN, more eculizumab-treated patients than placebo-treated patients achieved a status of improved (60.7% vs 41.7%) or MM (25.0% vs 13.3%; common OR: 2.3; 95% CI: 1.1-4.5). After 130 weeks of eculizumab treatment, 88.0% of patients achieved improved status and 57.3% of patients achieved MM status. The safety profile of eculizumab was consistent with its known profile and no new safety signals were detected. CONCLUSION: Eculizumab led to rapid and sustained achievement of MM in patients with AChR+ refractory gMG. These findings support the use of eculizumab in this previously difficult-to-treat patient population. CLINICALTRIALSGOV IDENTIFIER: REGAIN, NCT01997229; REGAIN open-label extension, NCT02301624. CLASSIFICATION OF EVIDENCE: This study provides Class II evidence that, after 26 weeks of eculizumab treatment, 25.0% of adults with AChR+ refractory gMG achieved MM, compared with 13.3% who received placebo

Minimal Symptom Expression' in Patients With Acetylcholine Receptor Antibody-Positive Refractory Generalized Myasthenia Gravis Treated With Eculizumab

The efficacy and tolerability of eculizumab were assessed in REGAIN, a 26-week, phase 3, randomized, double-blind, placebo-controlled study in anti-acetylcholine receptor antibody-positive (AChR+) refractory generalized myasthenia gravis (gMG), and its open-label extension