A Numerical Study of the Characteristics of Autoignited Laminar Lifted Methane/Hydrogen Jet Flames in Heated Coflow Air

Department of Mechanical EngineeringIn this thesis, the characteristics of autoignited laminar lifted jet flames of methane/hydrogen binary mixture fuels in heated coflow air are numerically investigated using laminarSMOKE with a 30-species skeletal methane/air kinetic mechanism. Detailed numerical simulations are performed for various fuel jet velocities with different hydrogen ratio of the fuel jet and the inlet temperature. Based on the flame structure and ignition temperature, the autoignited laminar lifted jet flames can be categorized into three different regimes of combustion mode: the tribrachial edge flame regime, the Moderate or Intense Low-oxygen Dilution (MILD) combustion regime, and the transition regime in between. Under relatively low temperature and high hydrogen ratio (LTHH) conditions, the simulations can capture an unusual decreasing liftoff height behavior with increasing jet velocity, qualitatively similar to those of previous experimental observations. From additional simulations with modified hydrogen mass diffusivity, it is verified that the high diffusive nature of hydrogen molecules is primarily attributed to the unusual liftoff height behavior under the LTHH condition. The Damk??hler number analysis, transport budget analysis and chemical explosive mode analysis (CEMA) verify that autoignition in the region upstream of the flamebase plays a critical role in stabilizing the lifted jet flames. In addition, the CEMA also identifies important species and reaction steps for the autoignition in the MILD combustion and tribrachial edge flame regimes. Finally, a novel correlation for the prediction of liftoff height is proposed for the autoignited laminar lifted methane/hydrogen jet flames under the LTHH conditions by noting that the ignition delay determined based on the species components at the flamebase can represent the autoignition of the binary mixture fuel jet reasonably well. The new correlation shows good agreement with the simulation results.ope

Carpal Tunnel Syndrome Caused by Space Occupying Lesions

PURPOSE: To evaluate the diagnosis and treatment of the carpal tunnel syndrome (CTS) due to space occupying lesions (SOL). MATERIALS and METHODS: Eleven patients and 12 cases that underwent surgery for CTS due to SOL were studied retrospectively. We excluded SOL caused by bony lesions, such as malunion of distal radius fracture, volar lunate dislocation, etc. the average age was 51 years. There were 3 men and 8 women. Follow-up period was 12 to 40 months with an average of 18 months. the diagnosis of CTS was made clinically and electrophysiologically. in patients with swelling or tenderness on the area of wrist flexion creases, magnetic resonance imaging (MRI) and/or computed tomogram (CT) were additionally taken as well as the carpal tunnel view. We performed conventional open transverse carpal ligament release and removal of SOL. RESULTS: the types of lesion confirmed by pathologic examination were; tuberculosis tenosynovitis in 3 cases, nonspecific tenosynovitis in 2 cases, and gout in one case. Other SOLs were tumorous condition in five cases, and abnormal palmaris longus hypertrophy in 1 case. Tumorous conditions were due to calcifying mass in 4 cases and ganglion in 1 case. Following surgery, all cases showed alleviation of symptom without recurrence or complications. CONCLUSION: in cases with swelling or tenderness on the area of wrist flexion creases, it is important to obtain a carpal tunnel view, and MRI and/or CT should be supplemented in order to rule out SOLs around the carpal tunnel, if necessary.ope

Reliability of DEXA on Body Composition in Korean Athletes

PURPOSE: The purpose of this study was to assess the reliability of DEXA for measuring body composition in Korean Athletes. METHODS: Twenty-nine athletes (n=29) registered for the college athlete program voluntarily participated in the study. Participants’ height and weight were measured, and BMI (Body Mass Index) was calculated before the participants’ body composition was measured. Muscle mass (kg), lean mass (kg), bone mineral density (BMC) (g·cm-2), and total fat mass (kg) of each participant was assessed by DEXA lunar DPX-L (GE Lunar, Madison, USA) for four times within a day to examine the difference by time frames. Four trials consist of ‘early in the morning × 2 with fasting’ with 30min break between two trials, ‘after lunch × 2’ with 30 min break between the two trials. Intra-class correlation (ICC) was conducted for overall reliability (p\u3c0.05) and a repeated measure ANOVA was performed to compare the difference of each trial (p\u3c0.05). RESULTS: The mean ± SD of muscle mass, lean mass, BMC, and fat mass was 56.4 ± 4.6kg, 59.4 ± 5.0kg, 2.3 ± 0.4g·cm-2, and 9.3 ± 4.8kg respectively. Each trail (mean ± SD) of muscle mass were 56.4 ± 4.7kg, 56.1 ± 4.8kg, 56.5 ± 4.6kg, and 56.4 ± 4.7kg, respectively, lean mass were 59.4 ± 5.1kg, 59.2 ± 5.1kg, 59.5 ± 5.0kg, and 59.4 ± 5.0kg, respectively, BMC were 3.0 ± 0.4g·cm-2, 3.0 ± 0.4g·cm-2, 3.0 ± 0.4g·cm- 2, and 3.0 ± 0.4g·cm-2, respectively, and fat mass were 9.3 ± 4.9kg, 9.2 ± 4.8kg, 9.3 ± 4.9kg, and 9.3 ± 4.9kg, respectively. Reliability of the ICC test showed strong agreement on muscle mass (r=0. 994 and p\u3c0.0001), lean mass (r=0. 995 and p\u3c0.0001), BMC (r=0. 995 and p\u3c0.0001), and fat mass (r=0. 998 and p\u3c0.0001). Cronbach’s alpha were 0.99 (muscle mass), 0.99 (Lean Mass), 0.99 (BMC), and 1.00 (Fat mass). No significant difference between each trial was observed in fat mass (p\u3e0.36). However, there was a significant difference in muscle mass (p\u3c0.001), lean mass (p\u3c0.001), and BMC (p\u3c0.04). CONCLUSION: Although all of the variables showed strong agreement on overall reliability from the ICC test, the reliability for the muscle mass, lean mass, and BMC showed significant differences in different time frame

Effectiveness of Pharmacopuncture for Asthma: A Systematic Review and Meta-Analysis

Pharmacopuncture is a new needle therapy that integrates acupuncture and herbal therapies, and it has the potential to treat many diseases. A systematic review was performed to summarize and critically evaluate clinical trial evidence regarding the effectiveness of pharmacopuncture for asthma. Eight electronic databases and six journals were searched in this study. Randomized clinical trials (RCTs) in which human patients with asthma were treated with pharmacopuncture were included. The selection of studies, data extraction, and validation were performed independently by two reviewers. Four RCTs met our inclusion criteria, and the evidence from all RCTs in this study was positive. The meta-analysis showed statistically significant effects of pharmacopuncture compared to conventional treatment (n = 341, Risk Ratio = 1.13, 95% CI of 1.05 to 1.23, P = .002, heterogeneity: χ2 = 3.55, P = .31, I2 = 16%). Two trials showed favorable effects of pharmacopuncture on peak expiratory flow (PEF). However, few rigorous trials have tested the effects of pharmacopuncture on asthma. The results of our systematic review point to the potential benefits of pharmacopuncture for adults with asthma, and we suggest further RCTs and the development of a standard method of pharmacopuncture therapy

Resonance of Domain Wall in a Ferromagnetic Nanostrip: Relation Between Distortion and Velocity

The resonance of the magnetic domain wall under the applied field amplifies its velocity compared to the one-dimensional model. To quantify the amplification, we define the distortion variation rate of the domain wall that can represent how fast and severely the wall shape is variated. Introducing that rate gives a way to bring the resonance into the one-dimensional domain wall dynamics model. We obtain the dissipated energy and domain wall velocity amplification by calculating the distortion variation rate. The relationship between velocity and distortion variation rate agrees well with micromagnetic simulation.Comment: 15 pages, 4 figure

Examining the Validity of Fitbit Charge HR \u3csup\u3eTM\u3c/sup\u3e for Measuring Heart Rate in Free-Living Conditions

Optical blood flow sensors (i.e. photoplethysmographic techniques) have recently been utilized in wearable activity trackers. The Fitbit Charge HRTM (FBHR) is one of the widely recognized wearable activity trackers that utilizes Fitbit’s proprietary PurePulse optical heart rate (HR) technology to automatically measure wrist-based HR. Despite its increasing popularity, however, no study to date has addressed the validity of FBHR for measuring HR in free-living conditions. PURPOSE: The purpose of this study was to examine the validity of FBHR for measuring HR using a chest strap Polar HR monitor (PHR) as a reference measure in free-living conditions. METHODS: Ten healthy college students (8 males; mean age = 26.5 ±5.4 years; mean body mass index (BMI) = 24.5 ±3.23 kg·m2) participated in the study. The participants were asked to perform normal daily activities for 8 hours in a day while wearing the PHR (model RS400) on their chest and two FBHRs on their dominant and non-dominant wrists, respectively. HR was recorded every minute and the minute-by-minute HR data from each monitor were synchronized by time of day. Pearson correlation was used to examine the linearity of average beats-per-minute (bpm) estimated from FBHRs with respect to the PHR. Mean differences in average bpm between the monitors were examined by a general linear model for repeated measures. Lastly, mean absolute percentage error (MAPE) of minute-by-minute bpm estimated from the FBHRs were calculated against the PHR. RESULTS: Average HRs (mean ±SD) for PHR, FBHR non-dominant, and FBHR dominant were 75.6 ±18.5 bpm, 72.8 ±16.7 bpm, and 73.9 ±17.06 bpm, respectively. Pearson correlation coefficients (r) between the PHR and FBHR non-dominant and dominant were r=.805 and r=.793, respectively. MAPE were 9.17 ±10.9% for FBHR non-dominant and 9.71 ± 12.4% for FBHR HR dominant. ANOVA and post-hoc analyses with Bonferroni revealed significant differences in estimating HR from FBHR non-dominant wrist (p=.001) and FBHR dominant wrist (p=.001) compared to PHR monitor. CONCLUSION: The results indicated that the wrist-oriented Fitbit Charge HRTM device does not provide an accurate measurement of HR during free-living condition in this study. However, further research is needed to validate these monitors with a larger sample with different population groups. Optical blood flow sensors (i.e. photoplethysmographic techniques) have recently been utilized in wearable activitytrackers. The Fitbit Charge HRTM (FBHR) is one of the widely recognized wearable activity trackers that utilizesFitbit’sproprietary PurePulse optical heart rate (HR) technology to automatically measure wrist-based HR. Despiteits increasing popularity, however, no study to date has addressed the validity of FBHR for measuring HR in free-living conditions. PURPOSE: The purpose of this study was to examine the validity of FBHR for measuring HRusing a chest strap Polar HR monitor (PHR) as a reference measure in free-living conditions. METHODS: Tenhealthy college students (8 males; mean age = 26.5 ±5.4 years; mean body mass index (BMI) = 24.5 ±3.23kg·m2) participated in the study. The participants were asked to perform normal daily activities for 8 hours in a daywhile wearing the PHR (model RS400) on their chest and two FBHRs on their dominant and non-dominant wrists,respectively. HR was recorded every minute and the minute-by-minute HR data from each monitor weresynchronized by time of day. Pearson correlation was used to examine the linearity of average beats-per-minute(bpm) estimated from FBHRs with respect to the PHR. Mean differences in average bpm between the monitorswere examined by a general linear model for repeated measures. Lastly, mean absolute percentage error (MAPE)of minute-by-minute bpm estimated from the FBHRs were calculated against the PHR. RESULTS: Average HRs(mean ±SD) for PHR, FBHR non-dominant, and FBHR dominant were 75.6 ±18.5 bpm, 72.8 ±16.7 bpm, and73.9 ±17.06 bpm, respectively. Pearson correlation coefficients (r) between the PHR and FBHR non-dominantand dominant were r=.805 and r=.793, respectively. MAPE were 9.17 ±10.9% for FBHR non-dominant and 9.71 ±12.4% for FBHR HR dominant. ANOVA and post-hoc analyses with Bonferroni revealed significant differences inestimating HR from FBHR non-dominant wrist (p=.001) and FBHR dominant wrist (p=.001) compared to PHRmonitor. CONCLUSION: The results indicated that the wrist-oriented Fitbit Charge HRTM device does not providean accurate measurement of HR during free-living condition in this study. However, further research is needed tovalidate these monitors with a larger sample with different population groups

Ru-Catalyzed, cis-Selective Living Ring-Opening Metathesis Polymerization of Various Monomers, Including a Dendronized Macromonomer, and Implications to Enhanced Shear Stability

An unsaturated polymer’s cis/trans-olefin content has a significant influence on its properties. For polymers obtained by ring-opening metathesis polymerization (ROMP), the cis/trans-olefin content can be tuned by using specific catalysts. However, cis-selective ROMP has suffered from narrow monomer scope and lack of control over the polymerization (giving polymers with broad molecular weight distributions and prohibiting the synthesis of block copolymers). Herein, we report the versatile cis-selective controlled living ROMP of various endo-tricyclo[4.2.2.0^(2,5)]deca-3,9-diene and various norbornene derivatives using a fast-initiating dithiolate-chelated Ru catalyst. Polymers with cis-olefin content as high as 99% could be obtained with high molecular weight (up to M_n of 105.1 kDa) and narrow dispersity (<1.4). The living nature of the polymerization was also exploited to prepare block copolymers with high cis-olefin content for the first time. Furthermore, owing to the successful control over the stereochemistry and narrow dispersity, we could compare cis- and trans-rich polynorbornene and found the former to have enhanced resistance to shear degradation