104,113 research outputs found
Recommended from our members
A sparse semi-blind source identification method and its application to Raman spectroscopy for explosives detection
Rapid and reliable detection and identification of unknown chemical substances are critical to homeland security. It is challenging to identify chemical components from a wide range of explosives. There are two key steps involved. One is a non-destructive and informative spectroscopic technique for data acquisition. The other is an associated library of reference features along with a computational method for feature matching and meaningful detection within or beyond the library. In this paper, we develop a new iterative method to identify unknown substances from mixture samples of Raman spectroscopy. In the first step, a constrained least squares method decomposes the data into a sum of linear combination of the known components and a non-negative residual. In the second step, a sparse and convex blind source separation method extracts components geometrically from the residuals. Verification based on the library templates or expert knowledge helps to confirm these components. If necessary, the confirmed meaningful components are fed back into step one to refine the residual and then step two extracts possibly more hidden components. The two steps may be iterated until no more components can be identified. We illustrate the proposed method in processing a set of the so called swept wavelength optical resonant Raman spectroscopy experimental data by a satisfactory blind extraction of a priori unknown chemical explosives from mixture samples. We also test the method on nuclear magnetic resonance (NMR) spectra for chemical compounds identification. © 2013 Published by Elsevier B.V
Two-Level Lattice Neural Network Architectures for Control of Nonlinear Systems
In this paper, we consider the problem of automatically designing a Rectified Linear Unit (ReLU) Neural Network (NN) architecture (number of layers and number of neurons per layer) with the guarantee that it is sufficiently parametrized to control a nonlinear system. Whereas current state-of-the-art techniques are based on hand-picked architectures or heuristic-based search to find such NN architectures, our approach exploits a given model of the system to design an architecture; as a result, we provide a guarantee that the resulting NN architecture is sufficient to implement a controller that satisfies an achievable specification. Our approach exploits two basic ideas. First, we assume that the system can be controlled by a Lipschitz-continuous state-feedback controller that is unknown but whose Lipschitz constant is upper-bounded by a known constant; then using this assumption, we bound the number of affine functions needed to construct a Continuous Piecewise Affine (CPWA) function that can approximate the unknown Lipschitz-continuous controller. Second, we utilize the authors' recent results on the Two-Level Lattice (TLL) NN architecture, a novel NN architecture that was shown to be parameterized directly by the number of affine functions that comprise the CPWA function it realizes. We also evaluate our method by designing a NN architecture to control an inverted pendulum
A 0.18ÎŒm CMOS 300MHz Current-Mode LF Seventh-order Linear Phase Filter for Hard Disk Read Channels
âThis material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." âCopyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.âA 300MHz CMOS seventh-order linear phase gm-C filter based on a current-mode multiple loop feedback (MLF) leap-frog (LF) structure is realized. The filter is implemented using a fully-differential linear operational transconductance amplifier (OTA) based on a source degeneration topology. PSpice simulations using a standard TSMC 0.18ÎŒm CMOS process with 2.5V power supply have shown that the cut-off frequency of the filter can be tuned from 260MHz to 320MHz and dynamic range is about 66dB. Group delay ripple is approximately 4.5% over the whole tuning range and maximum power consumption is 210mW
A 0.18ÎŒm CMOS 9mW current-mode FLF linear phase filter with gain boost
âThis material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." âCopyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.âThe design and implementation of a CMOS continuous-time follow-the-leader-feedback (FLF) filter is described. The filter is implemented using a fully-differential linear, low voltage and low power consumption operational transconductance amplifier (OTA) based on a source degeneration topology. PSpice simulations using a standard TSMC 0.18 mum CMOS process with 2 V power supply have shown that the cut-off frequency of the filter ranges from 55 MHz to 160 MHz and dynamic range is about 45 dB. The group delay is less than 5% over the whole tuning range; the power consumption is only 9 mW
Kinetics and mechanism of formic acid decomposition on Ru(001)
The steady-state rate of decomposition of formic acid on
Ru(001) has been measured as a function of surface temperature, parametric in the pressure of formic acid. The
products of the decomposition reaction are C0_2, H_2, CO,
and H_2)0, i.e., both dehydrogenation and dehydration occur
on Ru (001). A similar product distribution has been observed on Ni(110), Ni(100), Ru(100), Fe(100), and
Ni(111) surfaces; whereas only dehydrogenation to C0_2
and H_2 occurs on the Cu(100), Cu(110), and Pt(111)
surfaces. Only reversible adsorption and desorption of formic acid is observed on the less reactive Ag(110) surface at low temperatures, whereas the more reactive Mo(100) surface is oxidized by formic acid at low temperatures with the products of this reaction being H_2, CO, and H_(2)O (Ref. 10). We report here the confirmation of earlier observations of the occurrence of both dehydrogenation and dehydration of formic acid on Ru(001), and more importantly, we provide a detailed mechanistic description of the steady-state decomposition reaction on this surface in terms of elementary steps
- âŠ