Co-delivery of curcumin and resveratrol by folic acid-conjugated poly(glycerol adipate) nanoparticles for enhanced synergistic anticancer effect against osteosarcoma

This study explored the co-delivery of curcumin (CUR) and resveratrol (RV) using folic acid-conjugated poly(glycerol adipate)-based nanoparticles (FPPC NPs) to enhance their synergistic anticancer effects against osteosarcoma. Based on synergistic toxicity experiments against Saos-2 cells, the optimal synergistic CUR:RV ratios were 1:2 and 1:3, which were used for co-encapsulation. Increasing the amount of RV in the co-loaded NPs did not affect the properties of the nanocarriers, but predominantly increased the loading capacity of RV, especially at the 1:3 ratio, by 1.8–2.0 times, mediated by their interaction. All co-loaded NPs demonstrated sustained release of CUR with a burst release of RV, and the presence of RV accelerated the initial release of CUR from the carriers. Furthermore, the co-encapsulated NPs maintained CUR and RV synergism and greatly enhanced their toxicity against osteosarcoma by at least 1.8 times compared to their corresponding solutions through profound accumulation of Saos-2 cells in the sub G1 phase and late apoptosis. The internalization of FPPC NPs into cells via endocytosis was dose- and time-dependent. This study offers a proof-of-concept for a potential co-delivery system using tumor-targeted poly(glycerol adipate)-based NPs to enhance the anticancer activity of CUR and RV against osteosarcoma

High‐Throughput Miniaturized Screening of Nanoparticle Formation via Inkjet Printing

This is the peer reviewed version of the following article:Ioanna D. Styliari, et al, ‘High‐Throughput Miniaturized Screening of Nanoparticle Formation via Inkjet Printing’, Macromolecular Materials and Engineering, (2018), which has been published in final form at https://doi.org/10.1002/mame.201800146. Under embargo until 27 May 2019. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.The self‐assembly of specific polymers into well‐defined nanoparticles (NPs) is of great interest to the pharmaceutical industry as the resultant materials can act as drug delivery vehicles. In this work, a high‐throughput method to screen the ability of polymers to self‐assemble into NPs using a picoliter inkjet printer is presented. By dispensing polymer solutions in dimethyl sulfoxide (DMSO) from the printer into the wells of a 96‐well plate, containing water as an antisolvent, 50 suspensions are screened for nanoparticle formation rapidly using only nanoliters to microliters. A variety of polymer classes are used and in situ characterization of the submicroliter nanosuspensions shows that the particle size distributions match those of nanoparticles made from bulk suspensions. Dispensing organic polymer solutions into well plates via the printer is thus shown to be a reproducible and fast method for screening nanoparticle formation which uses two to three orders of magnitude less material than conventional techniques. Finally, a pilot study for a high‐throughput pipeline of nanoparticle production, physical property characterization, and cytocompatibility demonstrates the feasibility of the printing approach for screening of nanodrug delivery formulations. Nanoparticles are produced in the well plates, characterized for size and evaluated for effects on metabolic activity of lung cancer cells.Peer reviewe

Glycerol- and diglycerol-based polyesters: Evaluation of backbone alterations upon nano-formulation performance

Despite the success of polyethylene glycol-based (PEGylated) polyesters in the drug delivery and biomedical fields, concerns have arisen regarding PEG's immunogenicity and limited biodegradability. In addition, inherent limitations, including limited chemical handles as well as highly hydrophobic nature, can restrict their effectiveness in physiological conditions of the polyester counterpart. To address these matters, an increasing amount of research has been focused towards identifying alternatives to PEG. One promising strategy involves the use of bio-derived polyols, such as glycerol. In particular, glycerol is a hydrophilic, non-toxic, untapped waste resource and as other polyols, can be incorporated into polyesters via enzymatic catalysis routes. In the present study, a systematic screening is conducted focusing on the incorporation of 1,6-hexanediol (Hex) (hydrophobic diol) into both poly(glycerol adipate) (PGA) and poly(diglycerol adipate) (PDGA) at different (di)glycerol:hex ratios (30:70; 50:50 and 70:30 mol/mol) and its effect on purification upon NPs formation. By varying the amphiphilicity of the backbone, we demonstrated that minor adjustments influence the NPs formation, NPs stability, drug encapsulation, and degradation of these polymers, despite the high chemical similarity. Moreover, the best performing materials have shown good biocompatibility in both in vitro and in vivo (whole organism) tests. As preliminary result, the sample containing diglycerol and Hex in a 70:30 ratio, named as PDGA-Hex 30%, has shown to be the most promising candidate in this small library analysed. It demonstrated comparable stability to the glycerol-based samples in various media but exhibited superior encapsulation efficiency of a model hydrophobic dye. This in-depth investigation provides new insights into the design and modification of biodegradable (di)glycerol-based polyesters, potentially paving the way for more effective and sustainable PEG-free drug delivery nano-systems in the pharmaceutical and biomedical fields

Synthesis and properties of a biodegradable polymer-drug conjugate: Methotrexate-poly(glycerol adipate)

Polymer-drug conjugates have been actively developed as potential anticancer drug delivery systems. In this study, we report the first polymer-anticancer drug conjugate with poly(glycerol adipate) (PGA) through the successful conjugation of methotrexate (MTX). MTX-PGA conjugates were controllably and simply fabricated by carbodiimide-mediated coupling reaction with various high molar ratios of MTX. The MTX-PGA conjugate self-assembled into nanoparticles with size dependent on the amount of conjugated MTX and the pH of medium. Change in particle size was attributed to steric hindrance and bulkiness inside the nanoparticle core and dissociation of free functional groups of the drug. The MTX-PGA nanoparticles were physically stable in media with pH range of 5–9 and ionic strength of up to 0.15 M NaCl and further chemically stable against hydrolysis in pH 7.4 medium over 30 days but enzymatically degradable to release unchanged free drug. Although 30%MTX-PGA nanoparticles exhibited only slightly less potency than free MTX in 791T cells in contrast to previously reported human serum albumin-MTX conjugates which had >300 times lower potency than free MTX. However, the MTX nanoparticles showed 7 times higher toxicity to Saos-2 cells than MTX. Together with the enzymic degradation experiments, these results suggest that with a suitable biodegradable polymer a linker moiety is not a necessary component. These easily synthesised PGA drug conjugates lacking a linker moiety could therefore be an effective new pathway for development of polymer drug conjugates

Ketorolac-Loaded PLGA-/PLA-Based Microparticles Stabilized by Hyaluronic Acid: Effects of Formulation Composition and Emulsification Technique on Particle Characteristics and Drug Release Behaviors

This study aimed to develop ketorolac microparticles stabilized by hyaluronic acid based on poly(lactide-co-glycolide) (PLGA), poly(lactide) (PLA), and their blend for further application in osteoarthritis. The polymer blend may provide tailored drug release and improved physicochemical characteristics. The microparticles were prepared by water-in-oil-in-water (w/o/w) double emulsion solvent evaporation using two emulsification techniques, probe sonication (PS) and high-speed stirring (HSS), to obtain the microparticles in different size ranges. The results revealed that the polymer composition and emulsification technique influenced the ketorolac microparticle characteristics. The PS technique provided significantly at least 20 times smaller average size (1.3–2.2 µm) and broader size distribution (1.5–8.5) than HSS (45.5–67.4 µm and 1.0–1.4, respectively). The encapsulation efficiency was influenced by the polymer composition and the emulsification technique, especially in the PLA microparticles. The DSC and XRD results suggested that the drug was compatible with and molecularly dissolved in the polymer matrix. Furthermore, most of the drug molecules existed in an amorphous form, and some in any crystalline form. All of the microparticles had biphasic drug release composed of the burst release within the first 2 h and the sustained release over 35 days. The obtained microparticles showed promise for further use in the treatment of osteoarthritis

Enhanced Production of Bryonolic Acid in Trichosanthes cucumerina L. (Thai Cultivar) Cell Cultures by Elicitors and Their Biological Activities

Bryonolic acid is a triterpenoid compound found in cucurbitaceous roots. Due to its biological activities, this compound gets more attention to improve production. Herein, we carried out efficient ways with high bryonolic acid productions from Trichosanthes cucumerina L., a Thai medicinal plant utilizing plant cell cultures. The results showed that calli (24.65 ± 1.97 mg/g dry weight) and cell suspensions (15.69 ± 0.78 mg/g dry weight) exhibited the highest bryonolic acid productions compared with natural roots (approximately 2 mg/g dry weight). In the presence of three elicitors (methyl jasmonate, yeast extract, and chitosan), cell suspensions treated with 1 mg/mL of chitosan for eight days led to higher bryonolic acid contents (23.56 ± 1.68 mg/g dry weight). Interestingly, cell culture and root extracts with high bryonolic acid contents resulted in significantly higher percent cell viabilities than those observed under control (1% v/v DMSO) treatment in Saos-2 and MCF-7 cells. The present study indicated that T. cucumerina L. cell cultures are alternative and efficient to produce the biologically important secondary metabolite

Extemporaneous Preparation of 20 mg/mL Ganciclovir in Artificial Tears in Comparison with Sterile Water for Ophthalmic Administration: Formulation and Stability Study

Ganciclovir is available as a lyophilized powder for reconstitution and is normally used to treat ophthalmic viral infections. The use of ganciclovir in artificial tears containing hydrocolloid polymers may prove beneficial to patients during drug application, by prolonging contact time and providing a moistening effect. Therefore, this study aimed to extemporaneously prepare 20 mg/mL ganciclovir in artificial tears and compare its stability with that of a similar concentration of ganciclovir in sterile water (SWI) for ophthalmic administration. First, a compatibility study of the drug with commercial artificial tears found that it was compatible with artificial tears containing sodium hyaluronate (HYA). Subsequently, ganciclovir/0.1% HYA (HYA0.1) and ganciclovir/SWI eyedrops (EDs) in low-density polyethylene (LDPE) eyedrop bottles packed in light-shielded zipper bags were evaluated for their stability at 5 ± 3 °C and 30 ± 2 °C. The results revealed that ganciclovir/SWI ED had good physicochemical and microbiological stability when stored at 5 ± 3 °C for 12 weeks and at 30 ± 2 °C for 8 weeks. Meanwhile, ganciclovir/HYA0.1 ED was stable for 8 weeks when kept at 5 ± 3 °C and at 30 ± 2 °C, but ganciclovir in 0.3% HYA ED could be stored at 5 ± 3 °C for 8 weeks. Nevertheless, particulate matter may need to be investigated using a suitable method to ensure the absence of invisible particles in these preparations. Of these results, ganciclovir/HYA artificial tears and SWI EDs show potential for use as home medications for the treatment of ophthalmic viral infections

Modification of Poly(Glycerol Adipate) with Tocopherol and Cholesterol Modulating Nanoparticle Self-Assemblies and Cellular Responses of Triple-Negative Breast Cancer Cells to SN-38 Delivery

This study aimed to fabricate new variations of glycerol-based polyesters by grafting poly(glycerol adipate) (PGA) with hydrophobic bioactive moieties, tocopherol (TOC), and cholesterol (CHO). Their effects on nanoparticle (NP) formation, drug release, and cellular responses in cancer and normal cells were evaluated. CHO and TOC were successfully grafted onto PGA backbones with 30% and 50% mole grafting. Increasing the percentage of mole grafting in both molecules increased the glass transition temperature and water contact angle of the final polymers but decreased the critical micelle concentration of the formulated particles. PGA-TOC NPs reduced the proliferation of MDA-MB-231 cancer cells. However, they enhanced the proliferation of primary dermal fibroblasts within a specific concentration range. PGA-CHO NPs minimally affected the growth of cancer and normal cells. Both types of NPs did not affect apoptosis or the cell cycle of cancer cells. PGA-CHO and PGA-TOC NPs were able to entrap SN-38, a hydrophobic anticancer drug, with a particle size <200 nm. PGA-CHO NPs had a higher drug loading capacity and a greater drug release than PGA-TOC NPs. However, SN-38-loaded PGA-TOC NPs showed higher toxicity than SN-38 and SN-38-loaded PGA-CHO NPs due to the combined effects of antiproliferation and higher cellular uptake. Compared with SN-38, the drug-loaded NPs more profoundly induced sub-G1 in the cell cycle analysis and apoptosis of cancer cells in a similar pattern. Therefore, PGA-CHO and PGA-TOC polymers have potential applications as delivery systems for anticancer drugs

CD44-Targeted Lipid Polymer Hybrid Nanoparticles Enhance Anti-Breast Cancer Effect of <i>Cordyceps militaris</i> Extracts

This study aimed to improve the anticancer effect of Cordyceps militaris herbal extract (CME) on breast cancer cells with hyaluronic acid (HYA) surface-decorated lipid polymer hybrid nanoparticles (LPNPs) and evaluate the applicability of a synthesized poly(glycerol adipate) (PGA) polymer for LPNP preparation. Firstly, cholesterol- and vitamin E-grafted PGA polymers (PGA-CH and PGA-VE, respectively) were fabricated, with and without maleimide-ended polyethylene glycol. Subsequently, CME, which contained an active cordycepin equaling 9.89% of its weight, was encapsulated in the LPNPs. The results revealed that the synthesized polymers could be used to prepare CME-loaded LPNPs. The LPNP formulations containing Mal-PEG were decorated with cysteine-grafted HYA via thiol-maleimide reactions. The HYA-decorated PGA-based LPNPs substantially enhanced the anticancer effect of CME against MDA-MB-231 and MCF-7 breast cancer cells by enhancing cellular uptake through CD44 receptor-mediated endocytosis. This study demonstrated the successful targeted delivery of CME to the CD44 receptors of tumor cells by HYA-conjugated PGA-based LPNPs and the new application of synthesized PGA-CH- and PGA-VE-based polymers in LPNP preparation. The developed LPNPs showed promising potential for the targeted delivery of herbal extracts for cancer treatment and clear potential for translation in in vivo experiments