Fluorescence diagnosis of metastatic lymph nodes using 5-aminolevulinic acid (5-ALA) in a mouse model of colon cancer.

[Background]Lymph node metastasis is one of the most critical prognostic factors in patients with colorectal cancer. Although regional lymph nodes should be surgically resected and pathologically examined, techniques for the intraoperative diagnosis of lymph node metastasis remain to be well established. Fluorescence diagnosis using 5-aminolevulinic acid (5-ALA) is a promising technique for evaluating various malignancies. After exogenous administration of 5-ALA, protoporphyrin IX (PPIX) accumulates in malignant cells and can be detected as red fluorescence. In this study, we investigated the usefulness of fluorescence diagnosis using 5-ALA for the detection of lymph node metastasis in a mouse model of colon cancer. [Materials and Methods]An orthotopic colon cancer model was prepared by inoculating the cecal wall of nude mice with HCA7, a human colon adenocarcinoma cell line. After 3 wk, 40 mg/kg of 5-ALA was administered intraperitoneally (IP) or orally (PO). Fluorescence diagnosis with a D-Light System (Karl Storz) was then performed after 3 or 6 h. [Results]In the IP group, PPIX fluorescence was detected in metastatic lymph nodes as well as in other malignant lesions, including primary tumors and abdominal implantations, while non-metastatic nodes were fluorescence-negative. In contrast, no obvious fluorescence was detected in cancerous tissues in the PO group. [Conclusions]PPIX fluorescence induced by intraperitoneal injection of 5-ALA allows metastatic lymph nodes to be accurately diagnosed in this mouse model. This technique may facilitate the intraoperative diagnosis of lymph node metastases from colon cancer in a clinical setting

Electrical Properties of Monocrystalline Thin Film Si for Solar Cells Fabricated By Rapid Vapor Deposition with Nano-Surface Controlling Double Layer Porous Si in H2

International audienceIntroduction To reduce the Si thickness with maintaining the high quality is a promising approach to reduce the cost of monocrystalline Si solar cell. A major method to fabricate monocrystalline thin Si is epitaxy by Chemical Vapor Deposition (CVD) and Layer Transfer Process (LTP) as shown in Fig. 1. A seed layer and a sacrificial layer such as double layer porous Si (DLPS) which consist of a Low Porous Layer (LPL) and a High Porous Layer (HPL) are fabricated on the surface of a monocrystalline Si wafer, and then Si is epitaxially deposited on the seed layer. This wafer can then be reused in LTP, thus further reducing the material cost of these Si cells. There remain two challenging issues: (ⅰ) crystal defect introduced during epitaxy caused by the roughness of the seed layer 1) and (ⅱ) low deposition rate and yield of epitaxy by CVD. To solve problem (ⅰ), we proposed a Zone Heating Recrystallization (ZHR) method 2) to smoothen the DLPS surface as shown in Fig.2. The structure of the DLPS surface can be modified by using an upper lamp heater to scan the surface in one direction and a bottom heater to pre-heat Si substrate. To solve problem (ⅱ), we proposed a Rapid Vapor Deposition (RVD) method 3) as shown in Fig.3. By depositing Si under a high vapor pressure by heating the source Si to over 2000℃, the deposition rate of over 10 μm/min with a higher yield is achieved. By applying both the ZHR and RVD methods, we successfully reduced the roughness of a DLPS surface and obtained monocrystalline Si with Si wafer level. The critical effect of lowering the roughness of a DLPS surface to R ms < 0.3 nm wa

Millimeter-Thick Single-Walled Carbon Nanotube Forests: Hidden Role of Catalyst Support

A parametric study of so-called "super growth" of single-walled carbon nanotubes(SWNTs) was done by using combinatorial libraries of iron/aluminum oxide catalysts. Millimeter-thick forests of nanotubes grew within 10 min, and those grown by using catalysts with a thin Fe layer (about 0.5 nm) were SWNTs. Although nanotube forests grew under a wide range of reaction conditions such as gas composition and temperature, the window for SWNT was narrow. Fe catalysts rapidly grew nanotubes only when supported on aluminum oxide. Aluminum oxide, which is a well-known catalyst in hydrocarbon reforming, plays an essential role in enhancing the nanotube growth rates.Comment: 11 pages, 3 figures. Jpn. J. Appl. Phys. (Express Letters) in pres

Precise Three-Dimensional Morphology of the Male Anterior Anorectum Reconstructed From Large Serial Histologic Sections: A Cadaveric Study

BACKGROUND: Deep anatomic knowledge of the male anterior anorectum is important to avoid urethral injury and rectal perforation in intersphincteric resection or abdominoperineal resection for very low rectal cancer. However, its structure is difficult to understand, because the anorectum, muscles, and urogenital organs are complicatedly and 3-dimensionally arranged. OBJECTIVE: The purpose of this study was to revisit the anatomic information of the male anterior anorectum for intersphincteric resection and abdominoperineal resection with a focus on the spatial muscular morphology. DESIGN: This was a descriptive cadaveric study. SETTINGS: The study was conducted at Ehime and Kyoto universities. PATIENTS: Tissue specimens from 9 male cadavers were included. MAIN OUTCOME MEASURES: Specimens around the anterior anorectum were serially sectioned in the horizontal, sagittal, or frontal plane; large semiserial histologic sections were created at 250-μm intervals. The series were stained with Elastica van Gieson, and some sections from the series were studied by immunohistochemistry to detect smooth and striated muscles. Two series were digitalized and reconstructed 3-dimensionally. RESULTS: Two regions without a clear anatomic border were elucidated: 1) the anterior region of the external anal sphincter, where the external anal sphincter, bulbospongiosus muscle, and superficial transverse perineal muscle were intertwined; and 2) the rectourethralis muscle, where the smooth muscle of the longitudinal muscle continuously extended to the posteroinferior area of the urethra, which became closest to the anorectum at the prostatic apex level. A tight connection between the striated and smooth muscles was identified at the anterior part of the upper external anal sphincter and anterolateral part of the puborectalis muscle level. LIMITATIONS: This study involved a small sample size of elderly cadavers. CONCLUSIONS: This study clarified the precise spatial relationship between smooth and striated muscles. The detailed anatomic findings will contribute more accurate step-by-step anterior dissection in intersphincteric resection and abdominoperineal resection, especially with the transanal approach, which can magnify the muscle fiber direction and contraction of striated muscle by electrostimulation. MORFOLOGÍA TRIDIMENSIONAL PRECISA DEL ANORRECTO ANTERIOR MASCULINO RECONSTRUIDO A TRAVÉS DE SECCIONES MAYORES HISTOLÓGICAS EN SERIE: UN ESTUDIO CADAVÉRICO: El conocimiento anatómico amplio del anorrecto anterior masculino es importante para evitar lesiones de uretra y perforación de recto en la resección interesfinterica o la resección abdominoperineal para cáncer de recto bajo. Sin embargo, su estructura es difícil de entender porque el anorrecto, los músculos y los órganos urogenitales están aliñados en forma complexa tridimensional. OBJETIVO: Revisar de nuevo el conocimiento anatómico del anorrecto anterior masculino relevante a la resección interesfinterica y la resección abdominoperineal con un enfoque en la morfología muscular espacial. DISEÑO:: Estudio descriptivo cadavérico. ENTORNO: Ehime y la Universidad de Kyoto. SUJETOS: Tejido especímenes de nueve cadáveres masculinos. PUNTOS FINALES DE VALORACIÓN:: Las muestras alrededor del anorrecto anterior se seccionaron en serie en planos horizontal, sagital y coronal. Se crearon mayores secciones histológicas en serie a intervalos de 250 μm. Los especímenes fueron teñidos con Elástica van Gieson, y algunas secciones de la serie se estudiaron mediante inmunohistoquímica para detectar músculos lisos y estriados. Dos series fueron digitalizadas y reconstruidas tridimensionalmente. RESULTADOS: Se demostraron dos regiones sin un borde anatómico definido: (i) la región anterior del esfínter anal externo, donde se entrelazaron el esfínter anal externo, el músculo bulbospongoso y el músculo perineal transverso superficial; y (ii) músculo rectouretral, donde el músculo liso del músculo longitudinal se extiende continuamente a la zona posteroinferior de la uretra, que se acerca más al anorrecto a nivel del ápice prostático. La conexión estrecha entre los músculos estriados y lisos se identificó en la parte anterior del esfínter anal externo superior y la parte anterolateral del nivel del músculo puborrectal. LIMITACIÓN:: Este estudio incluyó una muestra pequeña de cadáveres ancianos. CONCLUSIÓN:: Este estudio aclaró la relación espacial precisa entre los músculos lisos y estriados. Los hallazgos anatómicos detallados ayudarán para una disección anterior paso a paso más precisa en la resección interesfintérica y la resección abdominoperineal, especialmente con el abordaje transanal, que puede magnificar la dirección de las fibras musculares y la contracción del músculo estriado utilizando electroestimulación

Analysis of the 619 Brånemark System TiUnite Implants : A Retrospective Study

The purpose of this retrospective study was to determine the outcome of Brånemark System TiUnite® implants (Nobel Biocare/Sweden), and to identify the risk factors associated with implant failure. A total of 151 patients (83 maxillae and 91 mandibles) received 619 implants from July 2003 until May 2010. The patients included 86 males and 65 females, with a median age of 51.6 years and an age range of 16 to 90 years at the time of implant surgery. Seventeen maxillae and 16 mandibles were completely edentulous, and 66 maxillae and 75 mandibles were partially edentulous. All the patients were followed until June 2011. Among the 619 implants, 9 maxillary implants and 8 mandibular implants were unsuccessful. The overall survival rate was 96.82%. A logistic regression analysis identified that a history of steroid treatment, application of a dento-maxillary prosthesis, a lack of mechanical coupling between the implants, and the length of the implants (≤8.5mm) were significant predictors of implant failure

Conversion to complete resection with mFOLFOX6 with bevacizumab or cetuximab based on K‐RAS status for unresectable colorectal liver metastasis (BECK study): Long‐term results of survival

[Background/Purpose]To investigate the long‐term outcome and entire treatment course of patients with technically unresectable CRLM who underwent conversion hepatectomy and to examine factors associated with conversion to hepatectomy. [Methods]Recurrence and survival data with long‐term follow‐up were analyzed in the cohort of a multi‐institutional phase II trial for technically unresectable colorectal liver metastases (the BECK study). [Results]A total of 22/12 patients with K‐RAS wild‐type/mutant tumors were treated with mFOLFOX6 + cetuximab/bevacizumab. The conversion R0/1 hepatectomy rate was significantly higher in left‐sided primary tumors than in right‐sided tumors (75.0% vs 30.0%, P = .022). The median follow‐up was 72.6 months. The 5‐year overall survival (OS) rate in the entire cohort was 48.1%. In patients who underwent R0/1 hepatectomy (n = 21), the 5‐year RFS rate and OS rate were 19.1% and 66.3%, respectively. At the final follow‐up, seven patients had no evidence of disease, five were alive with disease, and 20 had died from their original cancer. All 16 patients who achieved 5‐year survival underwent conversion hepatectomy, and 11 of them underwent further resection for other recurrences (median: 2, range: 1‐4). [Conclusions]Conversion hepatectomy achieved a similar long‐term survival to the results of previous studies in initially resectable patients, although many of them experienced several post‐hepatectomy recurrences. Left‐sided primary was found to be the predictor for conversion hepatectomy