104 research outputs found
Timing feedback-inhibition of the male reproductive hormone axis
Hormonal methods of male contraception have addressed feedback-inhbition of the cascade of hormones that has evolved to regulate sperm production but high concentrations of testosterone (T) in the blood have not worked satisfactorily. We hypothesized that an episodic event, such as degranulation of gonadotropin-releasing hormone (GnRH) neurons in the hypothalamus, could be as well inhibited by episodic interference as by continuously-applied suppression. We used a computational model of hypothalamus-pituitary-gonad axis described by Veldhuis et al. to test the hypothesis that episodic administration of T would inhibit GnRH and/or luteinizing hormone (LH) secretion. A set of stochastic differential equations model feedback as well as feed-forward actions of GnRH, LH and T. The model predicted feedback-inhibition of GnRH pulses in a dose and frequency dependent manner when transdermal patches or injections delivering pulsatile T were applied. Since the published model did not address the effect of chronic GnRH deprivation on the viability of pituitary gonadotrophes, we introduced a function to address this issue. Incorporation of this function in the model allowed the prediction of a “holiday period” in the contraceptive regimen, during which exogenous T would not be needed to protect from conception. Pulsatile T delivered by real-life transdermal delivery system applied as per a parsimonious regimen reduced secretion of LH and T and fertility. The vitality function, proposed to account for survival and proliferation of pituitary gonadotrophes correlated with in vivo observations as extensive apoptosis in the anterior pituitary was observed after application of transdermal T
Curriculum based dropout discriminator for domain adaptation
Domain adaptation is essential to enable wide usage of deep learning based
networks trained using large labeled datasets. Adversarial learning based
techniques have shown their utility towards solving this problem using a
discriminator that ensures source and target distributions are close. However,
here we suggest that rather than using a point estimate, it would be useful if
a distribution based discriminator could be used to bridge this gap. This could
be achieved using multiple classifiers or using traditional ensemble methods.
In contrast, we suggest that a Monte Carlo dropout based ensemble discriminator
could suffice to obtain the distribution based discriminator. Specifically, we
propose a curriculum based dropout discriminator that gradually increases the
variance of the sample based distribution and the corresponding reverse
gradients are used to align the source and target feature representations. The
detailed results and thorough ablation analysis show that our model outperforms
state-of-the-art results.Comment: BMVC 2019 Accepted, Project Page:
https://delta-lab-iitk.github.io/CD3A
SCSP-3: A Spectrally Augmented Common Spatial Pattern Approach for Robust Motor Imagery-based Brain-Computer Interface
Common spatial pattern (CSP) is a widely used
method for feature extraction in motor imagery (MI)-based
brain-computer interface (BCI) development. However, the performance of traditional CSP features often lacks robustness against inter-session and inter-subject variabilities present in MI-related electroencephalogram (EEG) signals. To address this limitation, we propose a novel approach to CSP-based feature extraction, combining spectral information obtained from Welch
power-spectrum (PS) estimation with temporal variations which we named here as SCSP-3. Our SCSP-3 method employs independent learning paths for the temporal and spectral features extracted through CSP. We introduce a postprocessing step that crosses the classification probabilities from these pathways using element-wise products, deriving linearly separable features. The performance of SCSP-3 is evaluated and compared to the
traditional CSP approach utilizing a support vector machine (SVM) for classification following a within-subject evaluation scheme. The results demonstrate a significant improvement in average accuracy for SCSP-3 with more generalizability, as it performs equally well with datasets from healthy subjects and stroke patients. This enhanced robustness and generalizability highlight the potential of SCSP-3 as a superior alternative to traditional CSP-based feature extraction methods for achieving consistent performance across different subject categories
Solvent volume dependent physical properties and electrocatalytic ability of nebulizer spray deposited CuInGaS 2 counter electrode for dye-sensitized solar cells
CuInGaS2 (CIGS) thin films were coated using nebulizer spray technique for different solvent volumes (10, 30, 50 and 70 ml) at the substrate temperature of 350 °C. The structural, optical and electrical properties were studied for the prepared CIGS thin films. CIGS thin films exhibited tetragonal structure and the maximum crystallite size was calculated for the film deposited using 50 ml solvent volume. The surface morphology of CIGS thin films was analyzed from scanning electron microscopy and atomic force microscopy studies. The electrical parameters of CIGS thin films such as resistivity, carrier concentration and mobility were examined using four probe method and Hall measurements. Electrocatalytic activities of the CIGS films towards redox couple (I−/I3−) were analyzed by cyclic voltammograms, electrochemical impedance spectroscopy, and Tafel polarization measurements. The high photocurrent efficiency was obtained for the CIGS counter electrode prepared using 50 ml solvent volume
Solvent volume-driven CuInAlS2 nanoflake counter electrode for effective electrocatalytic tri-iodide reduction in dye-sensitized solar cells
The influence of solvent volume on the properties of CuInAlS2 (CIAS) thin films deposited using simple and cost-effective nebulizer spray technique is studied. The polycrystalline CIAS thin films with tetragonal structure have been observed from the XRD results. SEM images show nanoflake-like structure on the film surface. The elemental presence and its chemical composition were examined by XPS and EDS. The deposited CIAS film for different solvent volume exhibited p-type semiconductor. Cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel polarization measurements demonstrated that CIAS counter electrodes are capable of tri-iodide reduction process. The performances of photocurrent density-voltage for the CIAS CE exhibited the maximum efficiency of 2.55% with the short-circuit current density of 7.22 mA cm−2
Low-cost and eco-friendly nebulizer spray coated CuInAlS 2 counter electrode for dye-sensitized solar cells
CuInAlS2 thin films for different substrate temperatures were deposited by a novel nebulizer spray technique. The polycrystalline CIAS thin film exhibited tetragonal structure with the preferential orientation of (1 1 2) plane. Nanoflakes were observed from the surface morphology of CIAS film. The peak position of core level spectra confirms the presence of CuInAlS2 from XPS analysis. The absorbance spectra and optical band gap were observed from the optical property. The activation energy, carrier concentration, hole mobility and resistivity were determined by linear four probe and Hall effect measurements. The CIAS film was used as a counter electrode (CE) in dye-sensitized solar cells (DSSCs) and is characterized by cyclic voltammetry, electrochemical impedance spectroscopy and Tafel measurements. DSSC fabricated with the CIAS CE achieved the photo conversion efficiency of about 2.55%
Facile preparation of hierarchical nanostructured CuInS2 counter electrodes for dye-sensitized solar cells
CuInS2 (CIS) thin films have been synthesized onto the glass substrates for different solvent volumes (10, 30, 50 and 70 ml) by nebulizer spray technique. The effect of solvent volume on the structural, morphological, compositional, optical and electrical properties of CIS thin films has been investigated. X-ray diffraction patterns suggest that the obtained CIS films are polycrystalline with the tetragonal structure. The surface morphology of the prepared CIS films purely depends on the solvent volume. The elemental quantitative investigation and the stoichiometric ratio of the CIS thin films were verified from XPS and EDS. High absorbance with the optical band gap of 1.13 eV was obtained at the higher solvent volume. All the deposited CIS thin films exhibited p-type semiconducting behavior with the high electrical conductivity and carrier concentration. CIS thin films deposited onto the FTO substrate were used as a counter electrode (CE) in dye-sensitized solar cells. CIS CEs possessed high electrocatalytic behavior and fast electron charge transfer at the CE/electrolyte interface. The CIS CE prepared using 50 ml solvent volume generated high energy conversion efficiency of about 3.25%
- …