209 research outputs found
Integrated gas turbine engine-nacelle
A nacelle for use with a gas turbine engine is provided with an integral webbed structure resembling a spoked wheel for rigidly interconnecting the nacelle and engine. The nacelle is entirely supported in its spacial relationship with the engine by means of the webbed structure. The inner surface of the nacelle defines the outer limits of the engine motive fluid flow annulus, while the outer surface of the nacelle defines a streamlined envelope for the engine
Integrated gas turbine engine-nacelle
A nacelle for use with a gas turbine engine is presented. An integral webbed structure resembling a spoked wheel for rigidly interconnecting the nacelle and engine, provides lightweight support. The inner surface of the nacelle defines the outer limits of the engine motive fluid flow annulus while the outer surface of the nacelle defines a streamlined envelope for the engine
Recommended from our members
DEGAS 2 neutral transport modeling of high density, low temperature plasmas
Neutral transport in the high density, low temperature plasma regime is examined using the DEGAS 2 Monte Carlo neutral transport code. DEGAS 2 is shown to agree with an analytic fluid neutral model valid in this regime as long as the grid cell spacing is less than twice the neutral mean-free path. Using new atomic physics data provided by the collisional radiative code CRAMD, DEGAS 2 is applied to a detached Alcator C-Mod discharge. A model plasma with electron temperature {approximately}1 eV along detached flux tubes, between the target and the ionization front, is used to demonstrate that recombination is essential to matching the experimental data. With the CRAMD data, {approximately}20% of the total recombination is due to molecular activated recombination
Recommended from our members
Spectroscopic diagnostics of tritium recycling in TFTR
The authors present the first spectroscopic measurements of tritium Balmer-alpha (T{sub {alpha}}) emission from a fusion plasma. A Fabry-Perot interferometer is used to measure the H{sub {alpha}}, D{sub {alpha}}, T{sub {alpha}} spectrum in the current D-T a experimental campaign on TFTR and the contributions of H, D and T are separated by spectral analysis. The T{sub {alpha}} line was measurable at concentrations T{sub {alpha}}/(H{sub {alpha}} + D{sub {alpha}} + T{sub {alpha}}) down to 2%
Validation in Fusion Research: Towards Guidelines and Best Practices
Because experiment/model comparisons in magnetic confinement fusion have not
yet satisfied the requirements for validation as understood broadly, a set of
approaches to validating mathematical models and numerical algorithms are
recommended as good practices. Previously identified procedures, such as
verification, qualification, and analysis of error and uncertainty, remain
important. However, particular challenges intrinsic to fusion plasmas and
physical measurement therein lead to identification of new or less familiar
concepts that are also critical in validation. These include the primacy
hierarchy, which tracks the integration of measurable quantities, and
sensitivity analysis, which assesses how model output is apportioned to
different sources of variation. The use of validation metrics for individual
measurements is extended to multiple measurements, with provisions for the
primacy hierarchy and sensitivity. This composite validation metric is
essential for quantitatively evaluating comparisons with experiments. To mount
successful and credible validation in magnetic fusion, a new culture of
validation is envisaged.Comment: 27 pages, 1 table, 6 figure
Comparison of Gas Puff Imaging Data in NSTX with the DEGAS 2 Simulation
Gas-Puff-Imaging (GPI) is a two dimensional diagnostic which measures the edge DĪ± light emission from a neutral D2 gas puff nears the outer mid-plane of NSTX. DEGAS 2 is a 3-D Monte Carlo code used to model neutral transport and atomic physics in tokamak plasmas. In this paper we compare measurements of the DĪ± light emission obtained by GPI on NSTX with DEGAS 2 simulations of DĪ± light emission for specific experiments. Both the simulated spatial distribution and absolute intensity of the DĪ± light emission agree well with the experimental data obtained between ELMs in H-mode. _________________________________________________
Modification Of The Electron Energy Distribution Function During Lithium Experiments On The National Spherical Torus Experiment
The National Spherical Torus Experiment (NSTX) has recently studied the use of a liquid lithium divertor (LLD). Divertor Langmuir probes have also been installed for making measurements of the local plasma conditions. A non-local probe interpretation method is used to supplement the classical probe interpretation and obtain measurements of the electron energy distribution function (EEDF) which show the occurrence of a hot-electron component. Analysis is made of two discharges within a sequence that exhibited changes in plasma fueling efficiency. It is found that the local electron temperature increases and that this increase is most strongly correlated with the energy contained within the hot-electron population. Preliminary interpretative modeling indicates that kinetic effects are likely in the NSTX
Toward a first-principles integrated simulation of tokamak edge plasmas
Performance of the ITER is anticipated to be highly sensitive to the edge plasma condition. The edge pedestal in ITER needs to be predicted from an integrated simulation of the necessary first-principles, multi-scale physics codes. The mission of the SciDAC Fusion Simulation Project (FSP) Prototype Center for Plasma Edge Simulation (CPES) is to deliver such a code integration framework by (1) building new kinetic codes XGC0 and XGC1, which can simulate the edge pedestal buildup; (2) using and improving the existing MHD codes ELITE, M3D-OMP, M3D-MPP and NIMROD, for study of large-scale edge instabilities called Edge Localized Modes (ELMs); and (3) integrating the codes into a framework using cutting-edge computer science technology. Collaborative effort among physics, computer science, and applied mathematics within CPES has created the first working version of the End-to-end Framework for Fusion Integrated Simulation (EFFIS), which can be used to study the pedestal-ELM cycles
Recommended from our members
Transport of recycled deuterium to the plasma core in TFTR
The authors report a study of the fueling of the plasma core by recycling in the Tokamak Fusion Test Reactor (TFTR). They have analyzed discharges fueled by deuterium recycled from the limiter and tritium-only neutral beam injection. In these plasmas, the DT neutron rate provides a measure of the deuterium influx into the core plasma. They find a reduced influx with plasmas using lithium pellet conditioning and with plasmas of reduced major (and minor) radius. Modeling with the DEGAS neutrals code shows that the dependence on radius can be related to the penetration of neutrals through the scrape-off layer
- ā¦