405 research outputs found
Concept, realization and characterization of serially powered pixel modules
We prove and demonstrate here for the example of the large scale pixel detector of ATLAS that Serial Powering of pixel modules is a viable alternative and that has been devised and implemented for ATLAS pixel modules using dedicated on-chip voltage regulators and modified flex hybrids circuits. The equivalent of a pixel ladder consisting of six serially powered pixel modules with about 0.3Mpixels has been built and the performance with respect to noise and threshold stability and operation failures has been studied. We believe that Serial Powering in general will be necessary for future large scale tracking detectors
Hybrid pixels for the PANDA Micro-Vertex Detector
PANDA is a fixed target experiment that will be carried out at the future FAIR facility. The PANDA experiment will perform precise studies of antiproton-proton and antiproton-nuclei annihilations, allowing to investigate different
physics topics. The Micro-Vertex Detector (MVD), which represents the innermost part of the central tracking system, features good spatial resolution, limited material budget, radiation hardness and PID capability. To cope with this requirements the MVD is composed by pixel and strip detectors. The custom pixel detector design foresees thin epitaxial sensors and a readout electronics developed in 130nm CMOS technology able to work in a triggerless environment. The first single chip assembly prototype for the pixel detector of PANDA is composed of the ToPix3 readout chip and a dedicated epitaxial silicon sensor matching in size the 640 readout channel matrix of the ASIC prototype. The bump bonding connection was done by IZM company. To perform the first beam test, a pixel tracking
station composed by 4 planes was assembled and tested with 2.7GeV/c protons at Forschungszentrum J¨ulich. The data analysis is presented
Characterization of a Single Crystal Diamond Pixel Detector in a High Energy Particle Beam
Diamond has been developed as a material for the detection of charged
particles by ionization. Its radiation hardness makes it an attractive material
for detectors operated in a harsh radiation environment e.g. close to a
particle beam as is the case for beam monitoring and for pixel vertex
detectors. Poly-crystalline chemical vapor deposition (CVD) diamond has been
studied as strip and pixel detectors so far. We report on a first-time
characterization of a single-crystal diamond pixel detector in a 100 GeV
particle beam at CERN. The detectors are made from irregularly shaped single
crystal sensors, 395mm thick, mated by bump bonding to a front-end readout IC
as used in the ATLAS pixel detector with pixel sizes of 50 x 400 mm2. The
diamond sensors show excellent charge collection properties: full collection
over the entire detector volume, clean and narrow signal charge distributions
with a S/N value of >100 and a hit detection efficiency of (99.9 +- 0.1)%. The
measured spatial resolution for particles under normal incidence in the shorter
pixel direction is (8.9 +- 0.1) um.Comment: 11 pages, 9 figure
Event building in FairRoot
Texture development and grain refinement of interstitial-free (IF) steel as a function of ideal simple shear or torsion was undertaken for up to 8 pressings, Route BC. Dominant texture components evolved after a single pass and remained correspondent for all subsequent passes. End-cycle (4 and 8 pass) orientation distribution functions (ODFs) showed an increased spread of contour levels and the re-appearance of texture components similar to the 0-pass condition. Rotation of torsion components away from their ideal pole figure (PF) orientations increased at mid-cycle and decreased to almost equivalent levels after end-cycle passes. This is attributed to the principle slip directions of BCC structures aligning with the shear direction
Technical Design Report for the PANDA Solenoid and Dipole Spectrometer Magnets
This document is the Technical Design Report covering the two large
spectrometer magnets of the PANDA detector set-up. It shows the conceptual
design of the magnets and their anticipated performance. It precedes the tender
and procurement of the magnets and, hence, is subject to possible modifications
arising during this process.Comment: 10 pages, 14MB, accepted by FAIR STI in May 2009, editors: Inti
Lehmann (chair), Andrea Bersani, Yuri Lobanov, Jost Luehning, Jerzy Smyrski,
Technical Coordiantor: Lars Schmitt, Bernd Lewandowski (deputy),
Spokespersons: Ulrich Wiedner, Paola Gianotti (deputy
- …