132 research outputs found

    Radiation characteristics of corner reflector antennas.

    Get PDF
    PhDThis thesis presents a study of the radiation characteristics of corner reflector antennas. The influence of the design parameters on the radiation characteristics are assessed using an analytical method and the Finite Difference Time Domain (FDTD) method. The FDTD method for corner reflector antennas which are electrically small to medium sized antennas is developed in detail. The important subject of the Absorbing Boundary Conditions (ABCs) is studied including a study of Mur ABC and Perfectly Matched Layers. It is shown that both methods reduce the reflections from the boundaries sufficient so that the far-field radiation pattern can be computed accurately. An analytical solution to compute the far-field radiation pattern for infinite comer reflector antennas is derived and used to understand the radiation mechanisms. Based on those results, the FDTD method is used to conduct a parametric study on finite sized comer reflector antennas. Experimental antennas have been built and measured in order to verify the computational predictions. Very good agreement is reported The novel idea of a variable beam-width comer reflector antenna is developed and practical designs of such an antenna are presented. The principle is to design the comer reflector antenna such that the beam-width of the antenna can be precisely modified. Data on the gain and beam-width are presented. This has been done both by computational and by an experimental model. The influence on the performance of the comer reflector antenna when substituting the solid reflector plates by rods has been investigated. The computational predictions have been verified by measurements of an experimental antenna. Very good agreement has been achieved. III[ The possibility of modifying the shape of the comer reflector antenna is investigated. It is shown that a modified comer reflector antenna with less depth produces the same far-field pattern as a standard corner reflector antenna. It is also shown that the performance of small aperture size corner reflector antennas is superior to a cylindrical parabolic reflector antenna

    Collisional losses, decoherence, and frequency shifts in optical lattice clocks with bosons

    Full text link
    We have quantified collisional losses, decoherence and the collision shift in a one-dimensional optical lattice clock with bosonic 88Sr. The lattice clock is referenced to the highly forbidden transition 1S0 - 3P0 at 698 nm, which becomes weakly allowed due to state mixing in a homogeneous magnetic field. We were able to quantify three decoherence coefficients, which are due to dephasing collisions, inelastic collisions between atoms in the upper and lower clock state, and atoms in the upper clock state only. Based on the measured coefficients, we determine the operation parameters at which a 1D-lattice clock with 88Sr shows no degradation due to collisions on the relative accuracy level of 10-16.Comment: 4 pages, 3 figure

    Observation of Large Atomic-Recoil Induced Asymmetries in Cold Atom Spectroscopy

    Full text link
    The atomic recoil effect leads to large (25 %) asymmetries in simple spectroscopic investigations of Ca atoms that have been laser-cooled to 10 microkelvin. Starting with spectra from the more familiar Doppler-broadened domain, we show how the fundamental asymmetry between absorption and stimulated emission of light manifests itself when shorter spectroscopic pulses lead to the Fourier transform regime. These effects occur on frequency scales much larger than the size of the recoil shift itself, and have not been observed before in saturation spectroscopy. These results are relevant to state-of-the-art optical atomic clocks based on freely expanding neutral atoms.Comment: 4 pages, 3 figure

    A transportable strontium optical lattice clock

    Full text link
    We report on a transportable optical clock, based on laser-cooled strontium atoms trapped in an optical lattice. The experimental apparatus is composed of a compact source of ultra-cold strontium atoms including a compact cooling laser set-up and a transportable ultra-stable laser for interrogating the optical clock transition. The whole setup (excluding electronics) fits within a volume of less than 2 m3^3. The high degree of operation reliability of both systems allowed the spectroscopy of the clock transition to be performed with 10 Hz resolution. We estimate an uncertainty of the clock of 7×10157\times10^{-15}.Comment: 12 pages, 9 figures, to be published in Appl. Phys.

    A compact and efficient strontium oven for laser-cooling experiments

    Get PDF
    Here we describe a compact and efficient strontium oven well suited for laser-cooling experiments. Novel design solutions allowed us to produce a collimated strontium atomic beam with a flux of 1.0\times10^13 s^-1 cm^-2 at the oven temperature of 450 {\deg}C, reached with an electrical power consumption of 36 W. The oven is based on a stainless-steel reservoir, filled with 6 g of metallic strontium, electrically heated in a vacuum environment by a tantalum wire threaded through an alumina multi-bore tube. The oven can be hosted in a standard DN40CF cube and has an estimated continuous operation lifetime of 10 years. This oven can be used for other alkali and alkaline earth metals with essentially no modifications.Comment: 6 pages, 6 figures, Review of Scientific Instruments, in pres

    Interferometer-Type Structures for Guided Atoms

    Get PDF
    We experimentally demonstrate interferometer-type guiding structures for neutral atoms based on dipole potentials created by micro-fabricated optical systems. As a central element we use an array of atom waveguides being formed by focusing a red-detuned laser beam with an array of cylindrical microlenses. Combining two of these arrays, we realize X-shaped beam splitters and more complex systems like the geometries for Mach-Zehnder and Michelson-type interferometers for atoms.Comment: 4 pages, 6 figure

    Measurement of the ac Stark shift with a guided matter-wave interferometer

    Full text link
    We demonstrate the effectiveness of a guided-wave Bose-Einstein condensate interferometer for practical measurements. Taking advantage of the large arm separations obtainable in our interferometer, the energy levels of the 87Rb atoms in one arm of the interferometer are shifted by a calibrated laser beam. The resulting phase shifts are used to determine the ac polarizability at a range of frequencies near and at the atomic resonance. The measured values are in good agreement with theoretical expectations. However, we observe a broadening of the transition near the resonance, an indication of collective light scattering effects. This nonlinearity may prove useful for the production and control of squeezed quantum states.Comment: 5 pages, three figure
    corecore