Pressurized Liquid Extraction of Diesel and Air Particulate Standard Reference Materials: Effect of Extraction Temperature and Pressure

Four particulate matter Standard Reference Materials (SRMs) available from the National Institute of Standards and Technology (NIST) were used to evaluate the effect of solvent, number of static cycles and static times, pressure, and temperature when using pressurized liquid extraction (PLE) for the extraction of polycyclic aromatic hydrocarbons (PAHs) and nitrated-PAHs. The four materials used in the study were SRM 1648a Urban Particulate Matter, SRM 1649b Urban Dust, SRM 1650b Diesel Particulate Matter, and SRM 2975 Diesel Particulate Matter (Industrial Forklift). The results from the study indicate that the choice of solvent, dichloromethane compared to toluene and toluene/methanol mixtures, had little effect on the extraction efficiency. With three to five extraction cycles, increasing the extraction time for each cycle from 5 to 30 min had no significant effect on the extraction efficiency. The differences in extraction efficiency were not significant (with over 95% of the differences being <10%) when the pressure was increased from 13.8 to 20.7 MPa. The largest increase in extraction efficiency occurred for selected PAHs when the temperature of extraction was increased from 100 to 200 °C. At 200 °C naphthalene, biphenyl, fluorene, dibenzothiophene, and anthracene show substantially higher mass fractions (>30%) than when extracted at 100 °C in all the SRMs studied. For SRM 2975, large increases (>100%) are also observed for some other PAHs including benz­[<i>a</i>]­anthracene, benzo­[<i>k</i>]­fluoranthene, benzo­[<i>e</i>]­pyrene, benzo­[<i>a</i>]­pyrene, benzo­[<i>ghi</i>]­perylene, and benzo­[<i>b</i>]­chrysene when extracted at the higher temperatures; however, similar trends were not observed for the other diesel particulate sample, SRM 1650b. The results are discussed in relation to the use of the SRMs for evaluating analytical methods

The influence of the aromatic character in the gas chromatography elution order: the case of polycyclic aromatic hydrocarbons

<p>A link between the aromatic character of polycyclic aromatic hydrocarbons (PAHs) and gas chromatography (GC) elution order in columns with a polysiloxane backbone in the stationary phase is reported for the first time. The aromatic character was calculated using a method that combines the π-Sextet Rule and the Pauling Ring Bond Orders to allow the establishment of the location and migration of aromatic sextets in PAH structures. One GC column with a polysiloxane-like backbone (Rxi-PAH) and three GC columns with a polysiloxane backbone (DB-5, SE-52 and LC-50) were used for the analysis. According to the results of this study, within an isomer group, PAHs that contain a lower number of rings affected by the aromatic sextets tend to elute earlier than PAHs that contain a higher number of rings affected by the aromatic sextets. The PAHs that follow the calculated elution order are 88% in the Rxi-PAH column, 88% in the DB-5 column, 93% in the SE-52 column and 85% in the LC-50 column. It is expected that future analyses with other aromatic compounds in GC columns with a polysiloxane backbone in the stationary phase will follow a GC elution order that agrees with the aromatic character of the molecules.</p

Development and Certification of a Standard Reference Material for Vitamin D Metabolites in Human Serum

The National Institute of Standards and Technology (NIST), in collaboration with the National Institutes of Health’s Office of Dietary Supplements (NIH-ODS), has developed a Standard Reference Material (SRM) for the determination of 25-hydroxyvitamin D [25­(OH)­D] in serum. SRM 972 Vitamin D in Human Serum consists of four serum pools with different levels of vitamin D metabolites and has certified and reference values for 25­(OH)­D₂, 25­(OH)­D₃, and 3-epi-25­(OH)­D₃. Value assignment of this SRM was accomplished using a combination of three isotope-dilution mass spectrometry approaches, with measurements performed at NIST and at the Centers for Disease Control and Prevention (CDC). Chromatographic resolution of the 3-epimer of 25­(OH)­D₃ proved to be essential for accurate determination of the metabolites

Development of a Cigarette Tobacco Filler Standard Reference Material

A new tobacco filler Standard Reference Material (SRM) has been issued by the National Institute of Standards and Technology (NIST) in September 2016 with certified and reference mass fraction values for nicotine, <i>N</i>-nitrosonornicotine, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone, and volatiles. The constituents have been determined by multiple analytical methods with measurements at NIST and at the Centers for Disease Control and Prevention, and with confirmatory measurements by commercial laboratories. This effort highlights the development of the first SRM for reduced nicotine and reduced tobacco-specific nitrosamines with certified values for composition

Development of a Standard Reference Material for Metabolomics Research

The National Institute of Standards and Technology (NIST), in collaboration with the National Institutes of Health (NIH), has developed a Standard Reference Material (SRM) to support technology development in metabolomics research. SRM 1950 Metabolites in Human Plasma is intended to have metabolite concentrations that are representative of those found in adult human plasma. The plasma used in the preparation of SRM 1950 was collected from both male and female donors, and donor ethnicity targets were selected based upon the ethnic makeup of the U.S. population. Metabolomics research is diverse in terms of both instrumentation and scientific goals. This SRM was designed to apply broadly to the field, not toward specific applications. Therefore, concentrations of approximately 100 analytes, including amino acids, fatty acids, trace elements, vitamins, hormones, selenoproteins, clinical markers, and perfluorinated compounds (PFCs), were determined. Value assignment measurements were performed by NIST and the Centers for Disease Control and Prevention (CDC). SRM 1950 is the first reference material developed specifically for metabolomics research