Solid-State Fabrication of Cu2O/CuO Hydroxide Nanoelectrode Array onto Graphene Paper by Thermal Dewetting for High-Sensitive Detection of Glucose

Nanostructures of Cu2O/CuO hydroxide suitable for the electrochemical determination of glucose are obtained by solid‐state dewetting of CuO layers 6, 8, and 31 nm thin deposited by sputtering onto 240 μm‐thick graphene paper. Solid‐state dewetting in nitrogen produces a partial decomposition of CuO into Cu2O and Cu. X‐ray diffraction patterns reveal the presence of high‐index crystallographic facets, which are reactive and useful toward glucose oxidation to gluconolactone. Typically, morphology studied by scanning electron microscopy reveals faceted nanoparticles with an average size below 200 nm. X‐ray photoelectron spectroscopy shows that the nanostructure surfaces of Cu2O and metallic copper exposed to natural ambient are promptly reoxidized and hydroxidized to a mixture of CuO and Cu(OH)2. Electrochemical characterization in amperometric mode reveals linear response to glucose concentration in the range from 50 to 10 × 10−3 m, sensitivity up to 83 μA cm−2 mm −1, and limit of detection up to 3.6 × 10−6 m. Good combination of low cost and simplicity of preparation with low limit of detection, high sensitivity, and wide linear range makes the proposed electrodes suitable for a variety of applications ranging from health to food and beverage industries

Model of Chronoamperometric Response towards Glucose Sensing by Arrays of Gold Nanostructures Obtained by Laser, Thermal and Wet Processes

Non-enzymatic electrochemical glucose sensors are of great importance in biomedical applications, for the realization of portable diabetic testing kits and continuous glucose monitoring systems. Nanostructured materials show a number of advantages in the applications of analytical electrochemistry, compared to macroscopic electrodes, such as great sensitivity and little dependence on analyte diffusion close to the electrode–solution interface. Obtaining electrodes based on nanomaterials without using expensive lithographic techniques represents a great added value. In this paper, we modeled the chronoamperometric response towards glucose determination by four electrodes consisting of nanostructured gold onto graphene paper (GP). The nanostructures were obtained by electrochemical etch, thermal and laser processes of thin gold layer. We addressed experiments obtaining different size and shape of gold nanostructures. Electrodes have been characterized by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry, and chronoamperometry. We modeled the current-time response at the potential corresponding to two-electrons oxidation process of glucose by the different nanostructured gold systems. The finest nanostructures of 10–200 nm were obtained by laser dewetting of 17 nm thin and 300 °C thermal dewetting of 8 nm thin gold layers, and they show that semi-infinite linear diffusion mechanism predominates over radial diffusion. Electrochemical etching and 17 nm thin gold layer dewetted at 400 °C consist of larger gold islands up to 1 μm. In the latter case, the current-time curves can be fitted by a two-phase exponential decay function that relies on the mixed second-order formation of adsorbed glucose intermediate followed by its first-order decay to gluconolactone

Investigation of ZnO-decorated CNTs for UV Light Detection Applications

Multi-walled carbon nanotubes (CNTs) decorated with zinc oxide nanoparticles (ZnO NPs) were prepared in isopropanol solution by a simple, room-temperature process and characterized from structural, morphological, electronic, and optical points of view. A strong interaction between ZnO and CNTs is fully confirmed by all the characterization techniques. ZnO-CNTs nanocomposites, with different weight ratios, were deposited as a dense layer between two electrodes, in order to investigate the electrical behaviour. In particular, the electrical response of the nanocomposite layers to UV light irradiation was recorded for a fixed voltage: As the device is exposed to the UV lamp, a sharp current drop takes place and then an increase is observed as the irradiation is stopped. The effect can be explained by adsorption and desorption phenomena taking place on the ZnO nanoparticle surface under irradiation and by charge transfer between ZnO and CNTs, thanks to the strong interaction between the two nanomaterials. The nanocomposite material shows good sensitivity and fast response to UV irradiation. Room temperature and low-cost processes used for the device preparation combined with room temperature and low voltage operational conditions make this methodology very promising for large scale UV detectors applications

AZO Nanoparticles-Decorated CNTs for UV Light Sensing: A Structural, Chemical, and Electro-Optical Investigation

Nanocomposites formed by aluminum-doped zinc oxide nanoparticles (AZO–NP) and multiwall carbon nanotubes (CNT) are proposed here as a promising material for UV light sensing applications, with the great advantage of operating in air, at room temperature, and at low voltage. Nanocomposite layers were prepared with different AZO:CNT weight ratios by a simple methodology at room temperature. They were characterized by means of UV–Vis spectroscopy, scanning and transmission electron microscopies (SEM and TEM), and X-ray photoelectron spectroscopy (XPS). The interaction between the two nanomaterials was demonstrated by comparing the properties of the nanocomposite with the ones shown by the AZO–NPs. Dense AZO–CNT nanocomposite layers were deposited between two metal electrodes on a SiO2/Si substrate, and the electrical properties were investigated in dark condition and under UV light irradiation. The electrical response to the UV light was a sudden current increase that reduced when the light was switched off. Several UV on/off cycles were performed, showing good repeatability and stability of the response. The mechanisms involved in the electrical response are discussed and compared to the ones previously reported for ZnO–CNT nanocomposites

Morphology, Electrical and Optical Properties of Cu Nanostructures Embedded in AZO: A Comparison between Dry and Wet Methods

Herein, Cu nanostructures are obtained by solid-state dewetting of 9 nm copper layer (dry) or by ablating copper target, using a nanosecond pulsed laser at 1064 nm, in acetone and isopropyl alcohol (wet). The Cu nanostructures are embedded in aluminum-doped zinc oxide layer. Then, the electrical, optical, and morphological properties of the two kinds of systems, as a function of their synthesis parameters, are investigated. The aim is to compare the two fabrication methods and select the main conditions to achieve the best system for photovoltaic applications. The main differences, exhibited by the wet and dry processes, were in the shape and size of the Cu nanostructures. Dewetting in nitrogen produces faceted nanoparticles, with an average size below 150 nm, while laser ablation originates spherical and smaller nanoparticles, below 50 nm. Dry system underwent to thermal annealing, which improves the electrical properties, compared to the wet system, with a sheet resistance of 103 vs. 106 Ω/sq, respectively; finally, the dry system shows a maximum transmittance of 89.7% at 697 nm, compared to the wet system in acetone, 88.4% at 647 nm, as well as in isopropyl alcohol, 86.9% at 686 nm. Moreover, wet systems show higher transmittance in NUV

Plasmonic and Conductive Structures of TCO Films with Embedded Cu Nanoparticles

Cu nanoparticles were produced by using solid-state dewetting (dry) of a 1.3 nm Cu layer or laser ablation of a Cu solid target (wet) in acetone and methanol. The morphology and chemical composition of the nanoparticles were investigated as a function of the synthesis methods and their key parameters of the annealing temperature (200–500 °C) and the liquid environment during the ablation. Cu nanoparticles were then embedded in transparent conductive oxide (TCO) films as aluminum-doped zinc oxide (AZO) or zirconium-doped indium oxide (IZrO); the TCObott/Cu nanoparticle/TCOtop structures were synthesized with all combinations of AZO and IZrO as the top and bottom layers. The goal was to achieve a plasmonic and conductive structure for photovoltaic applications via a comparison of the involved methods and all fabricated structures. In particular, solid-state dewetting produced faceted or spherical (depending on the annealing temperature) nanoparticles with an average size below 150 nm while laser ablation produced spherical nanoparticles below 250 nm. Dry and wet plasmonic conductive structures as a function of the TCOs employed and the temperature of annealing could reach a sheet resistance of 86 Ω/sq. The energy band-gap Egap, absorbance, transmittance, and reflectance of the plasmonic conductive structures were investigated in the UV–vis–NIR range. They showed a dependence on the sequence of the top and bottom TCO, with best transmittances of 89.4% for the dry plasmonic conductive structure and 84.7% for the wet plasmonic conductive structure. The latter showed a higher diffused transmittance of between 10–20% in the visible range

Limb salvage in diabetic patients with no-option critical limb ischemia: outcomes of a specialized center experience

Objective: To describe the characteristics, the management and the outcome of a consecutive series of patients with diabetic foot lesions (DF) and no-option critical limb ischemia (CLI) treated with a multidimensional, interdisciplinary approach in a dedicated center. Research Design and Methods: The prospective database of the Diabetic Foot Unit of the Maria Cecilia Hospital (Cotignola, Italy) collects medical history, risk factors, chemistry values, angiographic data, characteristic of foot lesions, medical and surgical therapies of all patients admitted with a diagnosis of DF and CLI. All patients were followed-up for at least 1 year and/or total recovery. The primary endpoint was 1-year amputation-free survival (AFS), secondary endpoints were limb salvage and survival. Results: Between October 2014 and October 2017, 1024 patients with DF and CLI were admitted to the center. Eighty-four of them (8.2%) fulfilled the criteria for no-option CLI. At 1 year, AFS, limb salvage, and survival rates were 34%, 34%, and 83%, respectively. Lesions located proximal to the Lisfranc joint were associated with major amputation (HR 2.1 [1.2–3.6]). One-year survival of patients treated with minor procedures was significantly higher compared to patients treated with major amputation (96% vs 76%, log-rank p = 0.019). Major amputation was independently associated with mortality (HR 7.83 [1.02–59.89]). Conclusions: The application of dedicated and standardized strategies permitted limb salvage in one-third of patients with no-option CLI. Patients with stable lesions limited to the forefoot and without ischaemic pain had a greater probability to successfully receive conservative treatments. Limb salvage was associated with subsequent higher one-year survival