450 research outputs found
Recent development in the design, testing and impact-damage tolerance of stiffened composite panels
Structural technology of laminated filamentary-composite stiffened-panel structures under combined inplane and lateral loadings is discussed. Attention is focused on: (1) methods for analyzing the behavior of these structures under load and for determining appropriate structural proportions for weight-efficient configurations; and (2) effects of impact damage and geometric imperfections on structural performance. Recent improvements in buckling analysis involving combined inplane compression and shear loadings and transverse shear deformations are presented. A computer code is described for proportioning or sizing laminate layers and cross-sectional dimensions, and the code is used to develop structural efficiency data for a variety of configurations, loading conditions, and constraint conditions. Experimental data on buckling of panels under inplane compression is presented. Mechanisms of impact damage initiation and propagation are described
Numerical and experimental investigation of the bending response of thin-walled composite cylinders
A numerical and experimental investigation of the bending behavior of six eight-ply graphite-epoxy circular cylinders is presented. Bending is induced by applying a known end-rotation to each end of the cylinders, analogous to a beam in bending. The cylinders have a nominal radius of 6 inches, a length-to-radius ratio of 2 and 5, and a radius-to-thickness ratio of approximately 160. A (+/- 45/0/90)S quasi-isotropic layup and two orthotropic layups, (+/- 45/0 sub 2)S and (+/- 45/90 sub 2)S, are studied. A geometrically nonlinear special-purpose analysis, based on Donnell's nonlinear shell equations, is developed to study the prebuckling responses and gain insight into the effects of non-ideal boundary conditions and initial geometric imperfections. A geometrically nonlinear finite element analysis is utilized to compare with the prebuckling solutions of the special-purpose analysis and to study the buckling and post buckling responses of both geometrically perfect and imperfect cylinders. The imperfect cylinder geometries are represented by an analytical approximation of the measured shape imperfections. Extensive experimental data are obtained from quasi-static tests of the cylinders using a test fixture specifically designed for the present investigation. A description of the test fixture is included. The experimental data are compared to predictions for both perfect and imperfect cylinder geometries. Prebuckling results are presented in the form of displacement and strain profiles. Buckling end-rotations, moments, and strains are reported, and predicted mode shapes are presented. Observed and predicted moment vs. end-rotation relations, deflection patterns, and strain profiles are illustrated for the post buckling responses. It is found that a geometrically nonlinear boundary layer behavior characterizes the prebuckling responses. The boundary layer behavior is sensitive to laminate orthotropy, cylinder geometry, initial geometric imperfections, applied end-rotation, and non-ideal boundary conditions. Buckling end-rotations, strains, and moments are influenced by laminate orthotropy and initial geometric imperfections. Measured buckling results correlate well with predictions for the geometrically imperfect specimens. The postbuckling analyses predict equilibrium paths with a number of scallop-shaped branches that correspond to unique deflection patterns. The observed postbuckling deflection patterns and measured strain profiles show striking similarities to the predictions in some cases. Ultimate failure of the cylinders is attributed to an interlaminar shear failure mode along the nodal lines of the postbuckling deflection patterns
Effects of Tangential Edge Constraints on the Postbuckling Behavior of Flat and Curved Panels Subjected to Thermal and Mechanical Loads
A parametric study of the effects of tangential edge constraints on the postbuckling response of flat and shallow curved panels subjected to thermal and mechanical loads is presented. The mechanical loads investigated are uniform compressive edge loads and transverse lateral pressure. The temperature fields considered are associated with spatially nonuniform heating over the panels, and a linear through-the-thickness temperature gradient. The structural model is based on a higher-order transverse-shear-deformation theory of shallow shells that incorporates the effects of geometric nonlinearities, initial geometric imperfections, and tangential edge motion constraints. Results are presented for three-layer sandwich panels made from transversely isotropic materials. Simply supported panels are considered in which the tangential motion of the unloaded edges is either unrestrained, partially restrained, or fully restrained. These results focus on the effects of the tangential edge restraint on the postbuckling response. The results of this study indicate that tangentially restraining the edges of a curved panel can make the panel insensitive to initial geometric imperfections in some cases
Degradation of Organics in a Glow Discharge Under Martian Conditions
The primary objective of this project is to understand the consequences of glow electrical discharges on the chemistry and biology of Mars. The possibility was raised some time ago that the absence of organic material and carbonaceous matter in the Martian soil samples studied by the VikinG Landers might be due in part to an intrinsic atmospheric mechanism such as glow discharge. The high probability for dust interactions during Martian dust storms and dust devils, combined with the cold, dry climate of Mars most likely results in airborne dust that is highly charged. Such high electrostatic potentials generated during dust storms on Earth are not permitted in the low-pressure CO2 environment on Mars; therefore electrostatic energy released in the form of glow discharges is a highly likely phenomenon. Since glow discharge methods are used for cleaning and sterilizing surfaces throughout industry, the idea that dust in the Martian atmosphere undergoes a cleaning action many times over geologic time scales appears to be a plausible one
Damage progression in compressively loaded laminates containing a circular cutout
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76038/1/AIAA-10597-113.pd
Electrodynamic Dust Shield for Surface Exploration Activities on the Moon and Mars
The Apollo missions to the moon showed that lunar dust can hamper astronaut surface activities due to its ability to cling to most surfaces. NASA's Mars exploration landers and rovers have also shown that the problem is equally hard if not harder on Mars. In this paper, we report on our efforts to develop and electrodynamic dust shield to prevent the accumulation of dust on surfaces and to remove dust already adhering to those surfaces. The parent technology for the electrodynamic dust shield, developed in the 1970s, has been shown to lift and transport charged and uncharged particles using electrostatic and dielectrophoretic forces. This technology has never been applied for space applications on Mars or the moon due to electrostatic breakdown concerns. In this paper, we show that an appropriate design can prevent the electrostatic breakdown at the low Martian atmospheric pressures. We are also able to show that uncharged dust can be lifted and removed from surfaces under simulated Martian environmental conditions. This technology has many potential benefits for removing dust from visors, viewports and many other surfaces as well as from solar arrays. We have also been able to develop a version of the electrodynamic dust shield working under. hard vacuum conditions. This version should work well on the moon
Buckling and Failure of Compression-loaded Composite Cylindrical Shells with Reinforced Cutouts
Results from a numerical and experimental study that illustrate the effects of selected cutout reinforcement configurations on the buckling and failure response of compression-loaded composite cylindrical shells with a cutout are presented. The effects of reinforcement size, thickness, and orthotropy on the overall response of compression-loaded shells are described. In general, reinforcement around a cutout in a compression-loaded shell can retard or eliminate the local buckling response and material failure near the cutout and increase the buckling load of the shell. However, some results show that certain reinforcement configurations can cause a significant increase in the local interlaminar failures that can accumulate near the free edges of a cutout during a local buckling event
1928-29: Abilene Christian College Bible Lectures - Full Text
INTRODUCTION
It has been the custom of Abilene Christian College for several years to hold an annual “Lectureship” the last week in February. This is a time of gathering of brethren from all over the state and adjoining states. It is a time of a great spiritual feast. It affords an opportunity for brethren to meet and talk over the work of the Lord. It also enables us to hear again great men of God whose voices have sounded the Word of the Lord in the days of the past in great meetings. In order that those who are not permitted to hear the lectures may enjoy them it has been the custom of Abilene Christian College to publish the lectures in a book at the end of each two years. We feel that these wonderful messages from some of the greatest minds of the church ought to be preserved that they may do good even after the lips of the speakers have become silent. It is with a prayer that great good may come that this volume of lectures of 1928 and 1929 is sent forth. We regret that some of the lectures could not be included in the book. Several of the brethren neglected to send in their manuscripts; some other manuscripts were destroyed by fire, and the brethren did not replace them. Most\u27 of the lectures are in the book.
BATSELL BAXTER.
DELIVERED IN THE AUDITORIUM OF ABILENE CHRISTIAN COLLEGE ABILENE, TEXAS FEBRUARY 1928-1929
FIRM FOUNDATION PUBLISHING HOUSE 104-106-108 E. 9th Street Austin, Texas
Vascular endothelial growth factor and basic fibroblast growth factor in children with cyanotic congenital heart disease
AbstractObjective: Vascular endothelial growth factor and basic fibroblast growth factor are potent stimulators of angiogenesis. Children with cyanotic congenital heart disease often experience the development of widespread formation of collateral blood vessels, which may represent a form of abnormal angiogenesis. We undertook the present study to determine whether children with cyanotic congenital heart disease have elevated serum levels of vascular endothelial growth factor and basic fibroblast growth factor. Methods: Serum was obtained from 22 children with cyanotic congenital heart disease and 19 children with acyanotic heart disease during cardiac catheterization. Samples were taken from the superior vena cava, inferior vena cava, and a systemic artery. Vascular endothelial growth factor and basic fibroblast growth factor levels were measured in the serum from each of these sites by enzyme–linked immunosorbent assay. Results: Vascular endothelial growth factor was significantly elevated in the superior vena cava (P = .04) and systemic artery (P = .02) but not in the inferior vena cava (P = .2) of children with cyanotic congenital heart disease compared to children with acyanotic heart disease. The mean vascular endothelial growth factor level, determined by averaging the means of all 3 sites, was also significantly elevated (P = .03). Basic fibroblast growth factor was only significantly elevated in the systemic artery (P = .02). Conclusion: Children with cyanotic congenital heart disease have elevated systemic levels of vascular endothelial growth factor. These findings suggest that the widespread formation of collateral vessels in these children may be mediated by vascular endothelial growth factor. (J Thorac Cardiovasc Surg 2000;119:534-9
Exercise-induced reversal of age-related declines of oxidative reactions, mitochondrial yield, and flavins in skeletal muscle of the rat
The ability of gastrocnemius muscle homogenates to catalyze the oxidation of succinate, glutamate + malate, pyruvate + malate, palmitoyl-coenzyme A, decanoylcarnitine and palmitoylcarnitine in the presence of ADP decreased by approximately 32% in sedentary male Sprague-Dawley rats between the ages of 9 and 25 months. Following 21 weeks of treadmill training (running), such homogenates from 25-month-old animals catalyzed oxidations 55% more rapidly than those from 25-month-old sedentary rats, and 17% faster than those from 9-month-old sedentary rats. Total and peptide-bound flavin of gastrocnemius muscles also declined between 9 and 25 months of age and were elevated in the 25-month-old endurance trained rats to levels greater than both 9- and 25-month-old sedentary animals. The yield of protein in the mitochondrial fraction from the quadriceps femoris muscle decreased between 9 and 25 months and was restored to the 9-month level by endurance training. The kinetic characteristics of the isolated mitochondria were not influenced by age or exercise. These data indicate that 2-year-old rats retain the capacity to increase skeletal muscle oxidative capacity and mitochondrial population density in response to endurance training.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/24891/1/0000318.pd
- …