18 research outputs found
Comparing complex impedance and bias step measurements of Simons Observatory transition edge sensors
The Simons Observatory (SO) will perform ground-based observations of the
cosmic microwave background (CMB) with several small and large aperture
telescopes, each outfitted with thousands to tens of thousands of
superconducting aluminum manganese (AlMn) transition-edge sensor bolometers
(TESs). In-situ characterization of TES responsivities and effective time
constants will be required multiple times each observing-day for calibrating
time-streams during CMB map-making. Effective time constants are typically
estimated in the field by briefly applying small amplitude square-waves on top
of the TES DC biases, and fitting exponential decays in the bolometer response.
These so-called "bias step" measurements can be rapidly implemented across
entire arrays and therefore are attractive because they take up little
observing time. However, individual detector complex impedance measurements,
while too slow to implement during observations, can provide a fuller picture
of the TES model and a better understanding of its temporal response. Here, we
present the results of dark TES characterization of many prototype SO
bolometers and compare the effective thermal time constants measured via bias
steps to those derived from complex impedance data.Comment: 10 pages, 6 figures, SPIE Astronomical Telescopes + Instrumentation
2020, Paper Number: 11453-18
The Simons Observatory Large Aperture Telescope Receiver
The Simons Observatory (SO) Large Aperture Telescope Receiver (LATR) will be
coupled to the Large Aperture Telescope located at an elevation of 5,200 m on
Cerro Toco in Chile. The resulting instrument will produce arcminute-resolution
millimeter-wave maps of half the sky with unprecedented precision. The LATR is
the largest cryogenic millimeter-wave camera built to date with a diameter of
2.4 m and a length of 2.6 m. It cools 1200 kg of material to 4 K and 200 kg to
100 mk, the operating temperature of the bolometric detectors with bands
centered around 27, 39, 93, 145, 225, and 280 GHz. Ultimately, the LATR will
accommodate 13 40 cm diameter optics tubes, each with three detector wafers and
a total of 62,000 detectors. The LATR design must simultaneously maintain the
optical alignment of the system, control stray light, provide cryogenic
isolation, limit thermal gradients, and minimize the time to cool the system
from room temperature to 100 mK. The interplay between these competing factors
poses unique challenges. We discuss the trade studies involved with the design,
the final optimization, the construction, and ultimate performance of the
system
The Atacama Cosmology Telescope: A Measurement of the DR6 CMB Lensing Power Spectrum and its Implications for Structure Growth
We present new measurements of cosmic microwave background (CMB) lensing over
sq. deg. of the sky. These lensing measurements are derived from the
Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) CMB dataset, which
consists of five seasons of ACT CMB temperature and polarization observations.
We determine the amplitude of the CMB lensing power spectrum at
precision ( significance) using a novel pipeline that minimizes
sensitivity to foregrounds and to noise properties. To ensure our results are
robust, we analyze an extensive set of null tests, consistency tests, and
systematic error estimates and employ a blinded analysis framework. The
baseline spectrum is well fit by a lensing amplitude of
relative to the Planck 2018 CMB power spectra
best-fit CDM model and relative to
the best-fit model. From our lensing power
spectrum measurement, we derive constraints on the parameter combination
of
from ACT DR6 CMB lensing alone and
when combining ACT DR6 and Planck NPIPE
CMB lensing power spectra. These results are in excellent agreement with
CDM model constraints from Planck or
CMB power spectrum measurements. Our lensing measurements from redshifts
-- are thus fully consistent with CDM structure growth
predictions based on CMB anisotropies probing primarily . We find no
evidence for a suppression of the amplitude of cosmic structure at low
redshiftsComment: 45+21 pages, 50 figures. Prepared for submission to ApJ. Also see
companion papers Madhavacheril et al and MacCrann et a
The Atacama Cosmology Telescope: High-resolution component-separated maps across one-third of the sky
Observations of the millimeter sky contain valuable information on a number
of signals, including the blackbody cosmic microwave background (CMB), Galactic
emissions, and the Compton- distortion due to the thermal Sunyaev-Zel'dovich
(tSZ) effect. Extracting new insight into cosmological and astrophysical
questions often requires combining multi-wavelength observations to spectrally
isolate one component. In this work, we present a new arcminute-resolution
Compton- map, which traces out the line-of-sight-integrated electron
pressure, as well as maps of the CMB in intensity and E-mode polarization,
across a third of the sky (around 13,000 sq.~deg.). We produce these through a
joint analysis of data from the Atacama Cosmology Telescope (ACT) Data Release
4 and 6 at frequencies of roughly 93, 148, and 225 GHz, together with data from
the \textit{Planck} satellite at frequencies between 30 GHz and 545 GHz. We
present detailed verification of an internal linear combination pipeline
implemented in a needlet frame that allows us to efficiently suppress Galactic
contamination and account for spatial variations in the ACT instrument noise.
These maps provide a significant advance, in noise levels and resolution, over
the existing \textit{Planck} component-separated maps and will enable a host of
science goals including studies of cluster and galaxy astrophysics, inferences
of the cosmic velocity field, primordial non-Gaussianity searches, and
gravitational lensing reconstruction of the CMB.Comment: The Compton-y map and associated products will be made publicly
available upon publication of the paper. The CMB T and E mode maps will be
made available when the DR6 maps are made publi
The Atacama Cosmology Telescope: DR6 Gravitational Lensing Map and Cosmological Parameters
We present cosmological constraints from a gravitational lensing mass map
covering 9400 sq. deg. reconstructed from CMB measurements made by the Atacama
Cosmology Telescope (ACT) from 2017 to 2021. In combination with BAO
measurements (from SDSS and 6dF), we obtain the amplitude of matter
fluctuations at 1.8% precision,
and the Hubble
constant at
1.6% precision. A joint constraint with CMB lensing measured by the Planck
satellite yields even more precise values: ,
and . These measurements agree
well with CDM-model extrapolations from the CMB anisotropies measured
by Planck. To compare these constraints to those from the KiDS, DES, and HSC
galaxy surveys, we revisit those data sets with a uniform set of assumptions,
and find from all three surveys are lower than that from ACT+Planck
lensing by varying levels ranging from 1.7-2.1. These results motivate
further measurements and comparison, not just between the CMB anisotropies and
galaxy lensing, but also between CMB lensing probing on
mostly-linear scales and galaxy lensing at on smaller scales. We
combine our CMB lensing measurements with CMB anisotropies to constrain
extensions of CDM, limiting the sum of the neutrino masses to eV (95% c.l.), for example. Our results provide independent
confirmation that the universe is spatially flat, conforms with general
relativity, and is described remarkably well by the CDM model, while
paving a promising path for neutrino physics with gravitational lensing from
upcoming ground-based CMB surveys.Comment: 30 pages, 16 figures, prepared for submission to ApJ. Cosmological
likelihood data is here:
https://lambda.gsfc.nasa.gov/product/act/actadv_prod_table.html ; likelihood
software is here: https://github.com/ACTCollaboration/act_dr6_lenslike . Also
see companion papers Qu et al and MacCrann et al. Mass maps will be released
when papers are publishe
The Atacama Cosmology Telescope: A measurement of the DR6 CMB lensing power spectrum and its implications for structure growth
We present new measurements of cosmic microwave background (CMB) lensing over 9400 deg2 of the sky. These lensing measurements are derived from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) CMB data set, which consists of five seasons of ACT CMB temperature and polarization observations. We determine the amplitude of the CMB lensing power spectrum at 2.3% precision (43σ significance) using a novel pipeline that minimizes sensitivity to foregrounds and to noise properties. To ensure that our results are robust, we analyze an extensive set of null tests, consistency tests, and systematic error estimates and employ a blinded analysis framework. Our CMB lensing power spectrum measurement provides constraints on the amplitude of cosmic structure that do not depend on Planck or galaxy survey data, thus giving independent information about large-scale structure growth and potential tensions in structure measurements. The baseline spectrum is well fit by a lensing amplitude of A lens = 1.013 ± 0.023 relative to the Planck 2018 CMB power spectra best-fit ΛCDM model and A lens = 1.005 ± 0.023 relative to the ACT DR4 + WMAP best-fit model. From our lensing power spectrum measurement, we derive constraints on the parameter combination S8CMBL≡σ8Ωm/0.30.25 of S8CMBL=0.818±0.022 from ACT DR6 CMB lensing alone and S8CMBL=0.813±0.018 when combining ACT DR6 and Planck NPIPE CMB lensing power spectra. These results are in excellent agreement with ΛCDM model constraints from Planck or ACT DR4 + WMAP CMB power spectrum measurements. Our lensing measurements from redshifts z ∼ 0.5–5 are thus fully consistent with ΛCDM structure growth predictions based on CMB anisotropies probing primarily z ∼ 1100. We find no evidence for a suppression of the amplitude of cosmic structure at low redshifts
The Atacama Cosmology Telescope: DR6 gravitational lensing map and cosmological parameters
We present cosmological constraints from a gravitational lensing mass map covering 9400 deg2 reconstructed from measurements of the cosmic microwave background (CMB) made by the Atacama Cosmology Telescope (ACT) from 2017 to 2021. In combination with measurements of baryon acoustic oscillations and big bang nucleosynthesis, we obtain the clustering amplitude σ 8 = 0.819 ± 0.015 at 1.8% precision, S8≡σ8(Ωm/0.3)0.5=0.840±0.028 , and the Hubble constant H 0 = (68.3 ± 1.1) km s−1 Mpc−1 at 1.6% precision. A joint constraint with Planck CMB lensing yields σ 8 = 0.812 ± 0.013, S8≡σ8(Ωm/0.3)0.5=0.831±0.023 , and H 0 = (68.1 ± 1.0) km s−1 Mpc−1. These measurements agree with ΛCDM extrapolations from the CMB anisotropies measured by Planck. We revisit constraints from the KiDS, DES, and HSC galaxy surveys with a uniform set of assumptions and find that S 8 from all three are lower than that from ACT+Planck lensing by levels ranging from 1.7σ to 2.1σ. This motivates further measurements and comparison, not just between the CMB anisotropies and galaxy lensing but also between CMB lensing probing z ∼ 0.5–5 on mostly linear scales and galaxy lensing at z ∼ 0.5 on smaller scales. We combine with CMB anisotropies to constrain extensions of ΛCDM, limiting neutrino masses to ∑m ν < 0.13 eV (95% c.l.), for example. We describe the mass map and related data products that will enable a wide array of cross-correlation science. Our results provide independent confirmation that the universe is spatially flat, conforms with general relativity, and is described remarkably well by the ΛCDM model, while paving a promising path for neutrino physics with lensing from upcoming ground-based CMB surveys
The Simons Observatory: The Large Aperture Telescope (LAT)
The Simons Observatory is a Cosmic Microwave Background experiment to observe the microwave sky in six frequency bands from 30 to 290 GHz. The Observatory—at ∼5200 m altitude—comprises three Small Aperture Telescopes and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its future timeline
The Atacama Cosmology Telescope: A Measurement of the DR6 CMB Lensing Power Spectrum and its Implications for Structure Growth
International audienceWe present new measurements of cosmic microwave background (CMB) lensing over sq. deg. of the sky. These lensing measurements are derived from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) CMB dataset, which consists of five seasons of ACT CMB temperature and polarization observations. We determine the amplitude of the CMB lensing power spectrum at precision ( significance) using a novel pipeline that minimizes sensitivity to foregrounds and to noise properties. To ensure our results are robust, we analyze an extensive set of null tests, consistency tests, and systematic error estimates and employ a blinded analysis framework. The baseline spectrum is well fit by a lensing amplitude of relative to the Planck 2018 CMB power spectra best-fit CDM model and relative to the best-fit model. From our lensing power spectrum measurement, we derive constraints on the parameter combination of from ACT DR6 CMB lensing alone and when combining ACT DR6 and Planck NPIPE CMB lensing power spectra. These results are in excellent agreement with CDM model constraints from Planck or CMB power spectrum measurements. Our lensing measurements from redshifts -- are thus fully consistent with CDM structure growth predictions based on CMB anisotropies probing primarily . We find no evidence for a suppression of the amplitude of cosmic structure at low redshift
Recommended from our members
The Atacama Cosmology Telescope: A Measurement of the DR6 CMB Lensing Power Spectrum and Its Implications for Structure Growth
Abstract
We present new measurements of cosmic microwave background (CMB) lensing over 9400 deg2 of the sky. These lensing measurements are derived from the Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) CMB data set, which consists of five seasons of ACT CMB temperature and polarization observations. We determine the amplitude of the CMB lensing power spectrum at 2.3% precision (43σ significance) using a novel pipeline that minimizes sensitivity to foregrounds and to noise properties. To ensure that our results are robust, we analyze an extensive set of null tests, consistency tests, and systematic error estimates and employ a blinded analysis framework. Our CMB lensing power spectrum measurement provides constraints on the amplitude of cosmic structure that do not depend on Planck or galaxy survey data, thus giving independent information about large-scale structure growth and potential tensions in structure measurements. The baseline spectrum is well fit by a lensing amplitude of A
lens = 1.013 ± 0.023 relative to the Planck 2018 CMB power spectra best-fit ΛCDM model and A
lens = 1.005 ± 0.023 relative to the ACT DR4 + WMAP best-fit model. From our lensing power spectrum measurement, we derive constraints on the parameter combination
S
8
CMBL
≡
σ
8
Ω
m
/
0.3
0.25
of
S
8
CMBL
=
0.818
±
0.022
from ACT DR6 CMB lensing alone and
S
8
CMBL
=
0.813
±
0.018
when combining ACT DR6 and Planck NPIPE CMB lensing power spectra. These results are in excellent agreement with ΛCDM model constraints from Planck or ACT DR4 + WMAP CMB power spectrum measurements. Our lensing measurements from redshifts z ∼ 0.5–5 are thus fully consistent with ΛCDM structure growth predictions based on CMB anisotropies probing primarily z ∼ 1100. We find no evidence for a suppression of the amplitude of cosmic structure at low redshifts.</jats:p